COMNAVAIRFORINST 4790.2C (CH 10)
PLANE CAPTAIN TRAINING SYLLABUS TOPICS
1. Indoctrination interview 2. Required reading (applicable sections) a. COMNAVAIRFORINST 4790.2C b. NAVAIR 00-80T-105, CV NATOPS Manual c. NAVAIR 00-80T-106, LHA/LHD NATOPS Manual d. NAVAIR 00-80T-113, Aircraft Signals NATOPS Manual e. NAVAIR 00-80T-122, Helicopter Operating Procedures for Air-Capable Ships NATOPS Manual f. NAVAIR 01-1A-17 Aviation Hydraulics Manual g. NAVAIR 01-1A-509 (series), Cleaning and Corrosion Control h. NAVAIR 04-10-506, Aircraft Tire and Tubes i. NAVAIR 17-1-125, Support Equipment Cleaning, Prevention and Corrosion Control 3. Safety Ashore and Afloat PQS 4. Flight Deck Familiarization 5. Egress/Explosive System Checkout Program 6. Flight Line/Flight Deck Safety 7. Noise Hazards 8. Exhaust Blast Hazards 9. Propeller or Rotor Hazards 10. Tire and Wheel Maintenance Safety Program 11. General or Avionics Corrosion Control Course 12. FOD Prevention Program 13. Tool Control Program 14. Fuel Surveillance Program 15. Navy Oil Analysis and Consumption Monitoring Program 16. Hydraulic Contamination Control Program 17. Hazardous Material Control and Management Program 18. Technical Publications 19. 3M Documentation 20. Support Equipment Operator Training and Licensing Program 21. Fire Fighting Procedures and Responsibilities 22. Moving Aircraft 23. Towing Aircraft 24. Brake Riding 25. Cleaning Aircraft 26. Aircraft Preservation 27. Duct Diving 28. Aircraft Fastener Integrity Inspection 29. Daily and Turnaround Inspections 30. Special Inspections 31. Conditional Inspections 32. Fueling and Defueling 33. Nitrogen System Servicing 34. Hydraulic System Servicing 35. Engine/Transmission Oil System Servicing 36. Liquid Oxygen Converter Handling Safety 37. Aircraft Ordnance 38. CADs 39. T/M/S NATOPS Procedures 40. Hand Signals 41. Launch/Recovery Procedures 42. Hot Brake Procedures 43. Aircraft Alert Posture Procedures 44. Flight Controls 45. Cockpit Instrumentation 46. Support Equipment Misuse and Abuse 47. T/M/S Standard Emergency Procedures 48. T/M/S PQS (if applicable) 49. Aircraft security, tie-down, and heavy weather procedures 50 Aircraft ordnance and armament equipmen
10.15 Egress/Explosive System Checkout Program (NAMPSOP)
10.15.1 References a. OPNAVINST 8023.24, Navy Personnel Conventional Ammunition and Explosives Handling Qualification and Certification Program. b. MCO 8023.3, Personnel Qualification and Certification Program for Class V Ammunition and Explosives. 10.15.2 Introduction 10.15.2.1 The Egress/Explosive Systems Checkout Program outlines requirements and responsibilities for training personnel on the dangers of aircraft installed egress and explosive systems. All Navy and Marine Corps activities, commercial and other government activities that perform on and off aircraft or equipment maintenance or other support functions on naval aircraft or Unmanned Aircraft Systems (UAS) with egress/explosive systems must comply with the Egress/Explosive Systems Checkout Program. NOTE: The training requirements of this NAMPSOP are separate from and do not satisfy the requirements for Ordnance Certification specified in OPNAVINST 8023.24 and MCO 8023.3. 10.15.2.2 Egress systems include ejection seats and related interconnect and sequence systems, installed parachute and seat survival kits, explosive devices and rocket motors used in seat propulsion, and hatches or canopies, which are shattered or jettisoned from the aircraft by use of explosive devices.
