ESAMS- Fall Protection
Horizontal lifeline shall be designed installed and used under the supervision of a qualified person that maintains its safety factor of at least
2.0
According to OSHA the anchorage strength requirement for work positioning system shall be capable of supporting at least twice to potential impact loading of employees fall or _________ pounds which ever is greater
3000
The maximum size of the safety net mesh opening shall not exceed
36 in.²
According to OPNAVINST 5100. 23G, chapter 13, what is the minimum height fall protection must be provided
4 feet
When using a 6 foot freefall energy absorbing lanyard, what is the maximum allowable deceleration distance of the energy observed absorber per ANSI Z359 is
48 inches
Climbing ladder fall arrest system requirements are
Anchorage strength shall be 3000 lbs
The required fall arrest attachment point on a full body harness shall be located
At the upper back between the shoulder blades (dorsal attachment)
Anchorage for horizontal lifelines shall
Be designed by a qualified person
When using fall arrest equipment which of the following rescue methods can be used
Command response agency self rescue or assisted rescue jurisdictional public response agency
Personal fall protection equipment shall be inspected by
End user prior to each use and component person once a year with documentation
When using fall arrest system and attaching the full body harness to in anchorage one of the following equipment is needed
Energy absorber self retracting device fall arrestor
True or False Controlled access zone is permitted for use when fall protection cannot be provided to personalnel expose to fall hazard
False
True or False When using climbing ladder follow arrest systems the point of attachment is the dorsal D ring
False
True or false Hands-on training and practical applications are not required as part of the end-user training
False
True or false a written rescue plan is prepared when fall risk equipment are not used
False
True or false in a properly designed restraint system a worker cannot be able to reach the edge by more than 3 1/2 feet
False
When using fall arrest system consider the following
Freefall distance shock absorbing lanyard total fall distance and clearance
Work platform shall be equipped with
Guard rail or other fall protection system
When working in a single or two point suspended scaffold, in addition to railing, each worker shall be tied off to
Independent vertical lifeline
Navy personnel shell comply with
Opnavinst 5100.23 series, chapter 13 and Navy fall protection guide for ashore facilities 29 CFR 1910
If a worker was climbing on a tower while attached to a vertical lifeline the workers fall protection system would be provided by
Single anchor vertical lifeline and mobile fall arrestor
True or false Climbing ladder fall arrest system shall be used on ladders over 20 feet long
True
True or false During erection and dismantling of scaffolding, evaluation is required to determine if it is not feasible to provide fall protection. If it is determined it is not feasible, fall protection may not be required
True
True or false an user is a person who is trained and authorized by the command to use fall protection equipment in a typical fall hazard situation
True
True or false covers shall be capable of supporting without failure, at least twice the weight of the person material and equipment combined
True
