Fire Officer I: Chapter 9

Under common law and most statutory law, the existence of an emergency: A. grants permission to fire and life safety emergency personnel to enact search and seizure. B. necessitates contact with sate or national guard systems for assistance. C. requires obtaining a warrant to enter private property. D. constitutes implied permission to enter private property.

D. constitutes implied permission to enter private property.

During a fire and life safety inspection, company personnel must _____ to avoid contaminating clean rooms or other environmentally controlled areas. A. set a pattern for inspection requirements B. contact the owner/occupant C. request reasonable accommodation D. don special clothing

D. don special clothing

Company officers receiving a complaint regarding _________ must know and follow the organization's policy to letter. A. resolutions B. public inquiries C. community interactivities D. employee acts or omissions

D. employee acts or omissions

The OSHA Hazard Communication Standard (HCS) (Subpart Z, Toxic and Hazardous Substances, 29 CFR 1910.1200) requires employers to identify hazards in the workplace, as well as train: A. responders in identifying and understanding the hazard. B. employees which specific identification system to use. C. responders how to recognize those hazards. D. employees how to recognize those hazards.

D. employees how to recognize those hazards.

The MOST important consideration inspectors must remember when deciding how to begin fire and life safety inspections is to: A. start from the lowest level and work their way to the roof. B. start from the roof and work their way back down to the lowest level. C. ensure floor plans match previous inspection documentations. D. ensure each and every compartment within the structure is inspected.

D. ensure each and every compartment within the structure is inspected.

Local jurisdictions often adopt one or more ordinances delegating authority to the ______ for protecting the public from fires and other safety hazards. A. fire marshal B. company officer C. haz mat technician D. fire chief

D. fire chief

According to NFPA 1021, Level 1 Fire Officers must ________ in order to perform fire and life safety inspections. A. determine how long the owner has occupied the structure B. adhere to current professional public relations campaigns for enhancing their department's public image C. know how to effectively use advanced technology D. know how to inspect and test private fire protection and signaling systems

D. know how to inspect and test private fire protection and signaling systems

Information about previous fire and life safety inspections may reveal noncompliance patterns of the ownership that may indicate: A. the need for additional officers to conduct inspections. B. consultation of the requirements for the type of occupancy. C. a lack of insurance coverage. D. level of commitment to fire and life safety.

D. level of commitment to fire and life safety.

The two most common types of Canadian Workplace Hazardous Materials Information System (WHMIS) labels are: (240) A. workplace and hazard. B. workplace and container. C. supplier and storage. D. supplier and workplace.

D. supplier and workplace.

NFA 220 Type V construction differs from Type IV mainly in: A. the type of wood that is allowed to be classified as Type V. B. the larger dimensions of the structural members. C. the use of approved noncombustible building materials. D. the smaller dimensions of the structural members.

D. the smaller dimensions of the structural members.

When company officers have questions regarding potential code infractions, they should refer to_______ when inspecting buildings and facilities. A. the owners/occupants B. the NFPA directly C. the governing body of the jurisdiction D. their fire prevention division

D. their fire prevention division

The primary concern when conducting a company-level fire and life safety inspection is: A. Data compilation and reports B. Property conservation C. Security of the tools and equipment D. Life Safety

D. Life Safety

Which of the following NFPA 220 construction types is referred to as noncombustible? A. Type II B. Type I C. Type IV D. Type III

A. Type II

How should fire and emergency services personnel view the diversity of language, cultural customs, and cultural views within their community? A. As assets B. As obligations C. As challenges D. As liabilities

A. As assets

Which of the following is one of the first skills company officers need when dealing with irate citizens? A. Public speaking B. Articulation C. Effective listening D. Legal interpretation

C. Effective listening

Which of the following are used only in communities with municipal alarm box systems? A. Auxiliary alarm systems B. Central station systems C. Local alarm systems D. Remote station systems

A. Auxiliary alarm systems

Which of the following are mandatory for all personnel conducting a fire and life inspection? A. Badges and official identification B. Well-groomed appearance C. Clean, pressed uniforms D. Coveralls and protective clothing

A. Badges and official identification

Which of the following is a major source for demographic data in Canada? A. Canadian Census Bureau B. U. S. Census Bureau C. U.S. Department of Labor D. Canadian Ministry of Labour

A. Canadian Census Bureau

Which of the following may require a company officer to speak on a citizen's behalf to whomever is empowered to deal with the issue at hand? A. Complaint resolutions B. Public relations events C. Unity of command D. Public inquires

A. Complaint resolutions

Which of the following public fire alarm systems are necessary in jurisdictions with a large call volume to prevent being inundated by fire calls? A. Type A B. Class I C. Class II D. Type B

A. Type A

Which of the following is created through documentation for every occupancy that the organization inspects? A. Inspection history B. Field sketches C. Liability limitations D. Code requirements

A. Inspection history

Which of the following is the most important life safety item to be inspected during a fire and life safety inspection? A. Means of egress B. Number of fire extinguishers C. Markings D. Housekeeping

A. Means of egress

A lack of understanding of community diversity can create which of the following challenges? A. Us-them mentality B. Exploitive mentality C. Bottom-line mentality D. Short-cut mentality

A. Us-them mentality

Which of the following should occur when conducting a closing interview after the inspection has found violations that are immediate threats to life safety? A. Review, discuss, and correct violations before leaving. B. Ask how owners/employees can work in a safe working environment. C. Research applicable occupancy code requirements. D. Close the facility until all corrections are made.

A. Review, discuss, and correct violations before leaving.

According to NFPA 101 Life Safety Code, all means of egress must be usable by: A. a person with severe mobility impairment. B. children under the age of five. C. waste management personnel. D. fire and emergency services personnel.

A. a person with severe mobility impairment.

Public safety education programs that consider diversity and different cultural beliefs are more likely to: A. be effective. B. distract from their mission. C. lose credibility. D. create proper funding opportunities.

A. be effective.

in the absence of a municipal water system, the owner/occupant's elevated water tank on the building's roof is inspected regarding: A. how well the system is maintained. B. how visible its pressure gauges are. C. the pump's discharge capacity. D. the system's adequacy.

A. how well the system is maintained.

When preparing for a fire and life safety inspection, company officers must know the purpose of the inspection, which is: A. leaving the occupancy safer than before the inspection. B. label points of the occupants' egress from the structure in an emergency. C. revealing information on the history of compliance or noncompliance. D. demonstrating a commitment to fire and life safety.

A. leaving the occupancy safer than before the inspection.

Local jurisdictions often adopt national model building and fire codes and standards through: A. local ordinances. B. executive actions. C. risk management plans. D. safety hazard legislation.

A. local ordinances.

An automatic sprinkler wet-pipe system is BEST described as having: A. piping constantly full of water under pressure. B. open sprinklers attached to piping containing water under pressure. C. open sprinklers attached to piping filled with air. D. piping constantly full of air under pressure.

A. piping constantly full of water under pressure.

To establish a positive relationship with the community, the company officer must know: A. who the external customers are. B. who the internal customers are. C. how to speak a second language such as Spanish. D. the credibility of the public information officer.

A. who the external customers are.

Which of the following are used to increase the pressure in the fire protection system when needed in occupancies where it is impractical or impossible to maintain water storage for fire protection? A. Standpipe systems B. Stationary fire pumps C. Elevated water tanks D. Private water supplies

B. Stationary fire pumps

Dimensions that qualify as heavy timber in NFPA 220 construction classifications vary but are usually at least _____ in their smallest dimension. A. 6 inches (150 mm) B. 8 inches (200 mm) C. 10 inches (250 mm) D. 4 inches (100 mm)

B. 8 inches (200 mm)

Halogenated agent systems are principally effective on which classes of fires? A. Class D and Class K B. Class B and Class C C. Class A and Class B D. Class C and Class D

B. Class B and Class C

Which of the following best describes Type I construction in the NFPA 220 and the International Building Codes classifications? A. Heavy timber B. Fire-resistive C. Ordinary D. Limited combustible

B. Fire-resistive

Which of the following fire extinguishing systems is MOST often used where application of water alone may not be as effective in extinguishing a fire? A. Dry-pipe B. Foam C. Wet-pipe D. Halogen

B. Foam

Which of the following is determined by how company officers resolve citizen concerns, complaints, and inquiries? A. Emergency response protocol B. Public image C. Diversity of constituents C. Public education programs

B. Public image

A fire and life safety inspection begins: A. when the company officer greets the owner. B. as the unit approaches the building or facility. C. as the unit leaves the department. D. When the owner/occupant unlocks the front door.

B. as the unit approaches the building or facility.

The purpose of a(an)________ is to increase the capability of providing detailed information to occupants and/or emergency responders who are on the premises. A. coded remote station system B. emergency voice/alarm communications system C. central station system D. auxiliary alarm system

B. emergency voice/alarm communications system

Standpipe and hose systems are required on each floor of structures greater than: A. one story. B. four stories. C. eight stories. D. ten stories.

B. four stories.

As part of their responsibilities while conducting fire and life safety inspections, company officers must identify: A. the history of the particular location. B. hazardous conditions that might cause fire or contribute to spread. C. all former owner/occupants of the structure being inspected. D. the demographics of the inspection area.

B. hazardous conditions that might cause fire or contribute to spread.

The NFPA 704 standard includes the widely recognized method for indicating the presence of _____ at commercial, manufacturing, institutional, or other fixed-storage facilities. A. emergency plans B. hazardous materials C. marking systems D. portable fire extinguishers

B. hazardous materials

The three contents-hazard classifications of occupancies by NFPA 5000 and NFPA 1 are: A. slow, moderate, and fast. B. low, ordinary, and high. C. slow, moderate, and extreme. D. low, medium, and high.

B. low, ordinary, and high.

During a fire and life safety inspection, the inspector should look for any_____, permanent or moveable, that will reduce the width of the original exit passageway. A. lighting system B. obstruction C. door swing D. marking

B. obstruction

Demographics are used in public service to determine specific groups within the service area in order to: A. ask citizens to leave. B. properly serve their needs. C. enhance public image. D. maintain secrecy.

B. properly serve their needs.

It is necessary to research the community that the emergency response organization serves in order to determine: A. the sources for demographic data on the national level. B. the population's exact composition. C. the appropriate method for dealing with customer concerns. D. the information privately published in almanacs.

B. the population's exact composition.

A fire extinguisher cabinet placed in a rated wall must have the same fire rating as the: A. extinguishing agent. B. wall assembly. C. tamper seals. D. flooring material.

B. wall assembly.

Exit doors must be capable of being opened from the inside with a single motion: A.next to a public street or alley open to the outside air. B. without key or special knowledge. C. during a fire and life safety annual inspection. D. in occupancies where 50 or more persons gather.

B. without key or special knowledge.

Which of the following is one of the two-fold purposes of fire and life safety inspections? A. Building public relations with the community B. Listening to citizens' concerns, inquiries, and complaints C. Ensuring that fire and life safety code requirements are adhered to within public facilities D. Forwarding complaints to administration

C. Ensuring that fire and life safety code requirements are adhered to within public facilities

Which of the following BEST describes the U.S. and Canadian Safety Color Codes? A. Denotes the level of risk associated with a facility's interior finishes B. Used to determine the exact nature of hazardous material found in an occupancy C. Can provide clues to the nature of hazardous materials in buildings and facilities D. Provides clear markings for means of ingress and egress

C. Can provide clues to the nature of hazardous materials in buildings and facilities

Which of the following fire extinguishing systems is used MOST often where rapid extinguishment is required but re-ignition is unlikely: A. Wet chemical systems B. Wet-pipe system C. Dry chemical systems D. Dry-pipe system

C. Dry chemical systems

Which of the following fire extinguishing systems is used MOST often where rapid extinguishment is required but re-ignition is unlikely? A. Wet-pipe System B. Wet chemical systems C. Dry chemical systems D. Dry-pipe system

C. Dry chemical systems

Which of the following storage types would MOST likely require in-rack automatic sprinkler systems? A. Exterior storage B. Roof storage C. High-stack storage D. Low-stack storage

C. High-stack storage

Which of the following BEST describes why exit drills are conducted? A. It alerts passersby to a fire so they will report it. B. It alerts occupants to a fire so they will leave the building. C. It familiarizes occupants with exit procedures and routes. D. It transmits signals to fire and emergency services organizations at other locations.

C. It familiarizes occupants with exit procedures and routes.

Which of the following is the role of company officers in a public relations program? A. Enforce community ethics B. Implement health and safety program C. Maintain a positive public image D. Revise the risk management program

C. Maintain a positive public image

The two major organizations that develop model building codes including structural, electrical, plumbing, and safety requirements are the: A. National Association of Home Builders and National Institute of Standards and Technology. B. Environmental Protection Agency and Housing and Urban Development. C. National Fire Protection Association and International Code Council D. American Insurance Company and National Board of Fire Examiners

C. National Fire Protection Association and International Code Council

Which of the following is a term commonly used to refer to Type III construction? A. Special B. Partial C. Ordinary D. Timber

C. Ordinary

Which of the following BEST describes why carbon dioxide fire extinguishing systems are hazardous to anyone in a flooded compartment? A. The system must have an emergency manual activation device to discharge agent. B. The system extinguishes fire by excluding carbon dioxide. C. The system extinguishes fire by excluding oxygen. D. The system must have pre-discharge alarm to warn of impending discharge.

C. The system extinguishes fire by excluding oxygen.

Model building codes provide municipalities and jurisdictions with the ability to: A. enforce annual inspections. B. take a reactive approach to fire prevention. C. ensure life safety of building occupants. D. implement understanding of diversity.

C. ensure life safety of building occupants.

The company officer's duty is to use ______ to satisfy a citizen's concern. A. the jurisdiction's legal department B. community expectations C. every legal and ethical means D. any personal resources

C. every legal and ethical means

Company officers must be able to use the appropriate method for dealing with customer concerns and complaints: A. to create challenges between providers and customers. B. in order to meet a set, minimum number of hours devoted to customer service. C. for the goodwill of the organization. D. to confirm the best way to learn is solely through experience.

C. for the goodwill of the organization.

The majority of model code families relating to buildings and fire safety in North America are based on use of the building or structure and: A. built-in fire detection and suppression systems. B. age and construction of the structure. C. occupancy type. D. construction materials.

C. occupancy type.

When handling public inquiries, company officers must develop the ability to hear what citizens mean as well as: A. any ulterior motives they may have. B. be aware as to why they live in the jurisdiction. C. what they ask. D. understand where they live and work.

C. what they ask.

The standard mounting height for a portable fire extinguisher with a gross weight not exceeding 40 pounds (18 kg) is: A. Top not more than 4 feet (1.2 m) above floor. B. Top not more than 2 feet (600 mm) above floor. C. Top not more than 3 feet (900 mm) above floor. D. Top not more than 5 feet (1.5 m) above floor.

D. Top not more than 5 feet (1.5 m) above floor.

Whose responsibility is it to resolve all concerns, complaints, and inquiries including those involving personnel acts and omissions? A. The jurisdictions's legal department B. Supervisors or administrative level personnel C. The company officer D. All members of the organization

D. All members of the organization

Which of the following would be the BEST source to consult in order to become familiar with the inspection requirements for the particular occupancy class or type? A. History of compliance or noncompliance in similar occupancies B. Records of previous inspections on similar occupancies C. Building and fire codes adopted at the state level D. Building and fire codes adopted by the jurisdiction

D. Building and fire codes adopted by the jurisdiction

Which of the following actions should a company officer follow if a violation of a fire and life safety inspection has not been corrected or a halfhearted attempt was made and the hazard still exists? A. Schedule an appointment for the next annual inspection. B. Call law enforcement officials to issue necessary citations. C. Thank the occupant and complete the necessary paperwork. D. Follow the organization's guidelines regarding how to gain code compliance.

D. Follow the organization's guidelines regarding how to gain code compliance.

Which of the following factors is MOST likely to be an indication of how owners/ occupants feel about a safe work environment? A. Processes B. Waste management C. Storage D. Housekeeping

D. Housekeeping

Which of the following factors are defined by the International Building Code classifications? A. Legal and regulatory services to owners/occupants and their insurers B. Insurance ratings and occupancy use determination C. Building economics and earthquake performance D. Materials and fire performance of the building elements of the structure

D. Materials and fire performance of the building elements of the structure

Regardless of the type of system or means of activation, all fire detection/signaling systems must: A. be labeled with correct product identifier. B. meet ANSI Z535.1 safety color codes. C. use the International Code Council (ICC) codes. D. Meet NFPA 72, National Fire Alarm Code.

D. Meet NFPA 72, National Fire Alarm Code.

Which of the following systems is MOST likely to be used to protect commonly owned buildings in a single location such as a college campus or industrial complex? A. Auxiliary alarm systems B. Local alarm systems C. Remote station systems D. Proprietary systems

D. Proprietary systems