Hi-Loks

Which of the following is not a component of a Hi-Lok pin? Select one: a. Shank b. Hexagonal socket c. Threads d. Collar

collar

True or False: Hi-Lok pins can be used with many different collars. Select one: True False

true

True or False: Hi-Loks can be installed easily by one person. Select one: True False

true

True or False: The shank is the part of the Hi-Lok that is permanently installed during the fastener installation process. Select one: True False

false

True or False: The transition area of a Hi-Lok is the full, cylindrical portion of the pin. Select one: True False

false

The head of a ________ head Hi-Lok sits flush with the surface of the material once it is installed. Select one: a. Protruding b. Flush c. Sunk d. Angled

flush

Selecting the correct Hi-Lok requires the measurement of ________. Select one: a. Grip b. Radius c. Temperature d. Texture

grip

When installing a Hi-Lok with hand tools, what will prevent the Hi-Lok from rotating in the drilled hole when you tighten the wrenching device? Select one: a. Needle nose pliers b. Screwdriver c. Allen wrench d. Pin punch

allen wrench

The ________ of a Hi-Lok is the full, cylindrical portion of the pin. Select one: a. Collar b. Shank c. Head d. Threading

shank

On a Hi-Lok, what is designed to break away when the engineered amount of torque is attained? Select one: a. Head b. Tip c. Pin d. Wrenching device

wrenching device

________ is the thickness of the two pieces of material that are going to be fastened together. Select one: a. Diameter b. Grip c. Width d. Shank depth

grip

Which of the following is not a characteristic of Hi-Loks? Select one: a. Vibration resistant b. Capable of bearing heavy, shear, or tension loads c. Usable anywhere a rivet can be used d. Lower strength-to-weight ratio than many other fasteners

lower strength to weight ration than many other fasteners

The ________ is where the threads meet the shank. Select one: a. Head b. Shank c. Hexagonal socket d. Transition area

transition area

True or False: A permanent fastener is one that cannot be removed after installation without destroying the fastener. Select one: True False

true

The ________ is the part of the Hi-Lok that is permanently installed during the fastener installation process. Select one: a. Pin b. Head c. Collar d. Point

collar

The ________ is the part of the Hi-Lok that applies pressure to one side of the materials that are being fastened. Select one: a. Head b. Shank c. Hexagonal socket d. Transition area

head

The two components that enable a Hi-Lok to hold materials together are the ________ and collar. Select one: a. Head b. Threads c. Pin d. Point

pin

The ________ of the transition area will vary based upon the style of Hi-Lok you are installing. Select one: a. Width b. Height c. Depth d. Length

width