IT-212 Module 1 - NP6.0

Réussis tes devoirs et examens dès maintenant avec Quizwiz!

Which of the following tasks is associated with the Session layer?

Connection establishment

Match each layer of the TCP/IP model on the left with the corresponding layer of the OSI model on the right. Each option on the left can be used more than once.

Answer:Presentation --> Application Data Link --> Network interface Application --> application Session--> Application Network --> Internet Transport --> Transport

Which of the following cable types often includes a solid plastic core that keeps the twisted pairs separated?

Cat 6

You've implemented a network where hosts are assigned specific roles, such as file sharing and printing roles. Other hosts access those resources, but they don't host services of their own. Which type of network do you have?

Client-server

Which of the following features does UDP provide? (Select two.)

Connectionless datagram services Low overhead

What is the basic purpose of the OSI Physical layer?

Coordinate rules for sending and receiving electrical signals.

Which of the following functions are performed by the OSI Transport layer? (Select three.)

Data segmentation and reassembly Reliable message delivery End-to-end flow control

Which of the following describes the point where the service provider's responsibility to install and maintain wiring and equipment ends and the customer's begins?

Demarc

You are the network administrator for a small organization. Recently, you contracted with an ISP to connect your organization's network to the internet. Since doing so, it has come to your attention that an intruder has invaded your network from the internet on three separate occasions. Which type of network hardware should you implement to prevent this from happening again?

Firewall

Which of the following hardware devices regenerate a signal out of all connected ports without examining the frame or packet contents? (Select two.)

Hub Repeater

In the OSI model, which of the following functions are performed at the Application layer? (Select two.)

Integration of network functionality into the host operating system. Enabling of communication between network clients and services.

Which of the following BEST describes how a switch functions?

It connects multiple cable segments (or devices) and forwards frames to the appropriate segment

Workstation3 has started communicating with Workstation2. It sends a frame to the default gateway. Identify the Layer 2 and Layer 3 addresses used by the Cisco 2600 router to forward the data to Workstation2 by dragging the corresponding address from the list on the left to its location on the right.

Layer 2 source address: 000b5f2a2222 Layer 3 source address: 192.168.11.11 Layer 2 destination address: 080046987654 Layer 3 destination address: 192.168.10.12

Which of the following terms identifies the wiring closet in the basement or ground floor that typically includes the demarcation point?

MDF

You have a large TCP/IP network and want to keep a host's real-time clock synchronized. Which protocol should you use?

NTP

At which OSI layer does a router operate to forward network messages?

Network

You're installing network wiring for a new Ethernet network at your company's main office building. The project specifications call for Cat 5e UTP network cabling and RJ45 wall jacks. Near the end of the project, you run out of wire before the last few runs are complete. You have a spool of Cat 3 network cable in storage. Upon closer inspection, it appears very similar to the Cat 5e wiring. To finish the project, should you use the Cat 3 cabling as a substitute for the Cat 5e cabling?

No. Cat 5e cabling has more twists per inch than Cat 3 cabling, reducing crosstalk and supporting higher data rates.

Your manager has asked you to implement a wired network infrastructure that will accommodate failed connections. You don't have a large budget, so you decide to provide redundancy for only a handful of critical devices. Which of the following network topologies should you implement?

Partial mesh

Which of the following terminates individual wires from a 25-pair or 100-pair cable using female RJ45 ports?

Patch panel

You've implemented a network where each device provides all other devices on the network with access to shared files. Which type of network do you have?

Peer-to-peer

Which of the following connectors is used with Ethernet 100BaseTX networks?

RJ45

At which layer of the OSI model do hubs operate?

Physical

Which of the following are included as part of the Data Link layer specifications? (Select two.)

Physical network device identification. Data transmission between hosts

You're adding new wires in your building for some new offices. The building has a false ceiling that holds the lights and provides an air path for heating and air conditioning. You'd like to run your Ethernet cables in this area. Which type of cable must you use?

Plenum-rated cable

Which term does the OSI model use that's different from the TCP/IP model in reference to the terms frame, packet, and segment?

Protocol data unit (PDU)

Which of the following hardware devices links multiple networks and directs traffic between networks?

Router

Routing data between computers on a network requires several mappings between different addresses. Which of the following statements is true?

Routers use ARP to resolve known IP addresses into MAC addresses.

Your company has just acquired another company in the same city. You need to integrate the two email systems so that messages can be exchanged between email servers. Currently, each network uses an email package from a different vendor. Which TCP/IP protocol enables message exchange between systems?

SMTP

TCP is a connection-oriented protocol that uses a three-way handshake to establish a connection to a system port. Computer 1 sends a SYN packet to Computer 2. Which packet does Computer 2 send back?

SYN/ACK

You have a small network that uses a switch to connect multiple devices. Which physical topology are you using?

Star

You're an application developer, and you're writing a program for exchanging video files through a TCP/IP network. You need to select a transport protocol that will guarantee delivery. Which TCP/IP protocol provides this capability?

TCP

During TCP/IP communication between two network hosts, information is encapsulated on the sending host and decapsulated on the receiving host using the OSI model. Match the information format on the left with the appropriate layer of the OSI model on the right.

Transport Layer ==> Segments Network Layer ==> Packets Data Link Layer ==> Frames Physical Layer ==> Bits

You have a network that occupies all three floors of a building. The WAN service provider has installed the line in a wiring closet on the main floor. You have a wiring closet on the two remaining floors directly above the wiring closet on the main floor. What would you use to connect the wiring closets together?

Vertical cross connect

How do switches and bridges learn where devices are located on a network?

When a frame enters a port, the source MAC address is copied from the frame header

Match each TCP/IP layers with its function.

breaks data into pieces - transport prepares the data to be sent - application adds physical addresses - link adds logical addresses - internet


Ensembles d'études connexes

A103 Lecture & Reading Quiz Questions Unit 2

View Set

MKTG 3650 Exam 2 Pt 2 The Skinny

View Set

The Wave Nature of Light True/False

View Set

APA Citations and Formatting Guidelines PPT, all parts of an APA Formatted Essay and its structure, APA quiz

View Set

Property Taxes & Like-Kind Exchanges

View Set

NCCT Phlebotomy Exam (Orders and Equipment)

View Set

Life Insurance Final Exam Questions Part 1

View Set