ITN (Version 7.00) - Basic Network Connectivity and Communications Exam Chapters 1-3

Refer to the exhibit. ServerB is attempting to contact HostA. Which two statements correctly identify the addressing that ServerB will generate in the process? (Choose two.) ServerB will generate a frame with the destination MAC address of RouterB. ServerB will generate a packet with the destination IP address of HostA. ServerB will generate a packet with the destination IP address of RouterA. ServerB will generate a frame with the destination MAC address of SwitchB. ServerB will generate a packet with the destination IP address of RouterB. ServerB will generate a frame with the destination MAC address of RouterA.

1,2

What are three characteristics of an SVI? (Choose three.) It is associated with VLAN1 by default. It is a special interface that allows connectivity by different types of media. It provides a means to remotely manage a switch. It is not associated with any physical interface on a switch. It is required to allow connectivity by any device at any location. It is designed as a security protocol to protect switch ports.

1,3,4

What three application layer protocols are part of the TCP/IP protocol suite? (Choose three.) FTP NAT ARP DHCP PPP DNS

1/4/6

Passwords can be used to restrict access to all or parts of the Cisco IOS. Select the modes and interfaces that can be protected with passwords. (Choose three.) boot IOS mode privileged EXEC mode Ethernet interface router configuration mode VTY interface console interface

2,5,6

What are two characteristics of RAM on a Cisco device? (Choose two.) RAM is a component in Cisco switches but not in Cisco routers. The configuration that is actively running on the device is stored in RAM. The contents of RAM are lost during a power cycle. RAM provides nonvolatile storage. RAM is able to store multiple versions of IOS and configuration files.

2/3

What is an advantage of network devices using open standard protocols? Internet access can be controlled by a single ISP in each market. Network communications is confined to data transfers between devices from the same vendor. A client host and a server running different operating systems can successfully exchange data. Competition and innovation are limited to specific types of products.

A client host and a server running different operating systems can successfully exchange data.

Match each characteristic to its corresponding Internet connectivity type. (Not all options are used.)

DSL -high bandwidth connection that runs over telephone lines. dialup telephone -typically has low bandwith satellite -not suited for heavily wooded areas cable -uses coaxial cable as a medium

A web client is receiving a response for a web page from a web server. From the perspective of the client, what is the correct order of the protocol stack that is used to decode the received transmission? HTTP, TCP, IP, Ethernet Ethernet, TCP, IP, HTTP HTTP, Ethernet, IP, TCP Ethernet, IP, TCP, HTTP

HTTP, TCP, IP, Ethernet

Match the description to the organization [Not all options are used.]

ISOC -> The organization promotes the open development, evolution, and use of the internet throughout the worldISO -> This organization is the largest developer of international standars in the world for a wide variety of products and services. It is know for its Open System Interconnection (OSI) reference model.IANA -> This organization is responsible for overseeing and managing IP address allocation, domain name management, and protocol identifiers

How is SSH different from Telnet? SSH must be configured over an active network connection, whereas Telnet is used to connect to a device from a console connection. SSH provides security to remote sessions by encrypting messages and using user authentication. Telnet is considered insecure and sends messages in plaintext. SSH makes connections over the network, whereas Telnet is for out-of-band access. SSH requires the use of the PuTTY terminal emulation program. Tera Term must be used to connect to devices through the use of Telnet. Navigation Bar

SSH provides security to remote sessions by encrypting messages and using user authentication. Telnet is considered insecure and sends messages in plaintext.

A technician configures a switch with these commands: SwitchA(config)# interface vlan 1 SwitchA(config-if)# ip address 192.168.1.1 255.255.255.0 SwitchA(config-if)# no shutdown What is the technician configuring? SVI physical switchport access password encryption Telnet access

SVI

Which statement accurately describes a TCP/IP encapsulation process when a PC is sending data to the network? Packets are sent from the network access layer to the transport layer. Frames are sent from the network access layer to the internet layer. Segments are sent from the transport layer to the internet layer. Data is sent from the internet layer to the network access layer.

Segments are sent from the transport layer to the internet layer.

Switch1?> config t invalid input detected An administrator is trying to configure the switch but receives the error message that is displayed in the exhibit. What is the problem? The entire command, configure terminal , must be used. The administrator must connect via the console port to access global configuration mode. The administrator must first enter privileged EXEC mode before issuing the command. The administrator is already in global configuration mode.

The administrator must first enter privileged EXEC mode before issuing the command.

For the TCP/IP protocol suite, what is the correct order of events when a Telnet message is being prepared to be sent over the network?

The telnet-formatted data is provided to the next alyer the TCP header is added the ip header is added the Ethernet header is added

What is a characteristic of multicast messages? They are sent to all hosts on a network. They must be acknowledged. They are sent to a select group of hosts. They are sent to a single destination.

They are sent to a select group of hosts.

Which statement is correct about network protocols? They all function in the network access layer of TCP/IP. Network protocols define the type of hardware that is used and how it is mounted in racks. They are only required for exchange of messages between devices on remote networks. They define how messages are exchanged between the source and the destination.

They define how messages are exchanged between the source and the destination.

A network administrator enters the service password-encryption command into the configuration mode of a router. What does this command accomplish? This command prevents someone from viewing the running configuration passwords. This command encrypts passwords as they are transmitted across serial WAN links. This command enables a strong encryption algorithm for the enable secret password command. This command provides an exclusive encrypted password for external service personnel who are required to do router maintenance. This command automatically encrypts passwords in configuration files that are currently stored in NVRAM.

This command prevents someone from viewing the running configuration passwords.

In the show running-config command, which part of the syntax is represented by running-config ? a variable a keyword the command a prompt

a keyword

Which device performs the function of determining the path that messages should take through internetworks? a firewall a DSL modem a router a web server

a router

What process involves placing one PDU inside of another PDU? segmentation encapsulation flow control encoding

encapsulation

Which command or key combination allows a user to return to the previous level in the command hierarchy? Ctrl-Z end Ctrl-C exit

exit

What method can be used by two computers to ensure that packets are not dropped because too much data is being sent too quickly? access method response timeout encapsulation flow control

flow control

Which PDU format is used when bits are received from the network medium by the NIC of a host? packet frame segment file

frame

What layer is responsible for routing messages through an internetwork in the TCP/IP model? internet transport session network access

internet

At which OSI layer is a destination port number added to a PDU during the encapsulation process? application layer data link layer network layer transport layer

network layer

At which OSI layer is a source IP address added to a PDU during the encapsulation process? application layer data link layer network layer transport layer

network layer

At which layer of the OSI model would a logical address be added during encapsulation? data link layer physical layer network layer transport layer

network layer

Refer to the exhibit. A network administrator is configuring access control to switch SW1. If the administrator uses a console connection to connect to the switch, which password is needed to access user EXEC mode?

password created after the line console 0 command

Which two OSI model layers have the same functionality as a single layer of the TCP/IP model? (Choose two.) physical network transport session data link

physical and data link

What term describes a policy that allows network devices to manage the flow of data to give priority to voice and video? intranet internet extranet quality of service

quality of service

Which method allows a computer to react accordingly when it requests data from a server and the server takes too long to respond? encapsulation flow control access method response timeout

response timeout

Which name is assigned to the transport layer PDU? segment data bits frame packet Navigation Bar

segment

What command is used to verify the condition of the switch interfaces, including the status of the interfaces and a configured IP address? ipconfig ping traceroute show ip interface brief

show ip interface brief

An employee at a branch office is creating a quote for a customer. In order to do this, the employee needs to access confidential pricing information from internal servers at the Head Office. What type of network would the employee access? a local area network an intranet the Internet an extranet

the intranet

Which interface allows remote management of a Layer 2 switch? the first Ethernet port interface the AUX interface the switch virtual interface the console port interface

the switch virtual interface

Why would a Layer 2 switch need an IP address? to enable the switch to be managed remotely to enable the switch to function as a default gateway to enable the switch to receive frames from attached PCs to enable the switch to send broadcast frames to attached PCs

to enable the switch to be managed remotely

An administrator uses the Ctrl-Shift-6 key combination on a switch after issuing the ping command. What is the purpose of using these keystrokes? to allow the user to complete the command to interrupt the ping process to restart the ping process to exit to a different configuration mode

to interrupt the ping process

What type of network traffic requires QoS? wiki on-line purchasing email video conferencing

video conferencing