Lesson Assessment #17
An insulated grounded conductor _____ AWG or smaller shall be identified by a continuous white or gray outer finish, or by three continuous white or gray stripes along its entire length on other than green insulation.
6
The continuity of a grounded conductor shall not depend on a connection to _____.
a metallic enclosure, a raceway, cable armor
The screw shell of a luminaire or lampholder shall be connected to the _____.
grounded conductor
Article 200 provides the requirements for _____.
identification of terminals, grounded conductors in premises wiring systems, identification of grounded conductors
Where grounded conductors of different systems are installed in the same raceway, cable, or enclosure, the means of identification of the different neutrals shall be documented in a manner that is _____ or be permanently posted where the conductors of different systems originate.
readily available
120V, single phase, 15A and 20A branch circuits supplying outlets and devices installed in guest _____ of hotels and motels shall be protected by any of the means described in 210.12(A)(1) through (6).
rooms, suites
The identification of _____ to which a grounded conductor is to be connected shall be substantially white in color.
terminals
The white conductor within a cable can be used for a(n) _____ conductor where permanently reidentified to indicate its use as an ungrounded conductor at each location where the conductor is visible and accessible.
ungrounded
Receptacles shall have the terminal intended for connection to the grounded conductor identified by a metal or metal coating that is substantially _____ in color.
white