Safety MSSC

To protect your hands, you should only wear gloves approved by __________.

ASTM

Working around live electrical circuits requires a worker to wear gloves approved by __________.

ASTM

Product design teams should provide an environment that encourages team members to __________.

Add their design ideas freely

The reason that grease is not recycled like oil is because __________.

Both A and B (it is not cost efficient, it is very difficult to remove the impurities).

Which of the following sling arrangements puts the most strain on the sling?

C

__________ is the cause of many industrial accidents.

Carelessness

Emergency showers and eyewashes must be available where __________ are used.

Caustics or acids

__________ are commonly made from leather and designed to go over a welder's pants to protect their legs from molten metal or sparks.

Chaps

Inhalation is the most common way for a(n) __________ to enter the body.

Chemical

If you note that an air handling machine is making a noise you think might be abnormal what should you do?

Contact the maintenance department

__________ involves every employee in the company continually looking for ways to improve processes, and eliminate wasteful actions.

Continuous improvement

A machinist who has learned to weld has undergone __________.

Cross-training

Companies have a better ability to match workers to specific job needs if they use __________.

Cross-training

To ensure safe transportation of hazardous materials, the EPA developed regulations jointly with the __________.

DOT

What is a symptom of drug and alcohol abuse?

Decreased productivity

The amount of exposure to a chemical without the unreasonable risk of injury is listed on the SDS as __________.

TLV (Threshold Limit Value)

A fire extinguisher operates by removing the fuel, heat, or oxygen from the fire.

TRUE

SDS sheets contain information regarding first aid, the manufacturer, and proper personal protection equipment for use.

TRUE

To be successful, __________ must be tied to the company's business plan.

Team goals

Operators should be given more training specifically related to the machine if what occurs?

The operator is not producing parts that meet specifications

Stamps on the body of compressed gas cylinders indicate __________.

The safety test date

What should a worker do if a paint filtering system breaks down and paint is being blown out on top of the roof?

The system should be shut down.

What happens upon completion of forklift training?

The worker's training record is updated.

The __________ is a guideline published by the American Conference of Governmental Industrial Hygienists and outlines how much of a particular chemical a worker can be exposed to without an unreasonable health risk.

Threshold Limit Value (TLV)

In manufacturing, changes to processes, equipment and people are the largest drivers of __________.

Training

In today's competitive markets, processes and people are constantly changing, resulting in a large need for __________.

Training

Manufacturing companies use __________ to save time and reduce cost of operation.

Training

When a new piece of equipment is installed, operators should receive __________ before the machine goes into production.

Training

Clear statements of expectations are needed when __________.

Training employees

Companies often add production by adding another shift. If operators are hired for a new shift, what will be needed?

Training records of existing operators

The highest load rating a ladder may have is __________.

Type IAA

Hazardous materials being shipped internationally are given a four-digit number preceded by the letters __________ to identify the material being shipped.

UN (United Nations)

An internationally recognized number assigned to a chemical for identification purposes is called the __________.

United Nations Identification Number

A certification from a physician is required before __________.

Using air breathing apparatus

__________ management presents the information about the production process in a visual format so that workers can use it to improve efficiency and promote safety.

Visual

To protect the eyes from welding flash, welders must use __________.

Welding helmet

A worker should use pedestrian walkways and doors __________.

When forklifts are operating in the area

Are the cable clamps on the wire rope sling oriented correctly?

Yes

Cross-training increases an employee's value to the company because they have additional skills and __________.

a better understanding of related job functions

As a safety precaution, which of these should be chained to a rigid fixture?

a compressed gas cylinder

Safety glasses with side shields should be used when working with __________.

a grinding wheel

A platform with a height above 10 feet requires __________.

a handrail and toe board

Which of the following should be done when a new or different machine is installed?

a job safety analysis

To operate a high lift, a worker must be __________.

a qualified operator

A single pry truck can be used to move a load __________.

a short distance

When welding, safety glasses with side shields should be worn with __________ for additional eye protection.

a welding helmet

Using your legs when lifting objects will help prevent __________ injuries.

back

One of the most common causes of head injuries is __________.

banging your head into an unseen object

To protect your back during lifting, you should place your feet shoulder width apart, __________ and then grasp and lift the object.

bend at the knees

__________ is a technique teams use for generating as many ideas as possible.

brainstorming

Before operating a powered industrial truck, the __________ should be checked to ensure that they can stop the truck and/or hold it in position.

brakes

If a person has swallowed a chemical you should __________.

call 911 or poison control and tell them what chemical was taken

To check for leaks on a half-mask respirator when inhaling, cover the __________ with the palms of your hands.

cartridges

An organizational method for the production areas that groups together all the machines that are needed to produce a part or a group of parts is called __________ manufacturing.

cellular

Cranes can only be operated by a __________.

certified crane operator

An effective way to kill any potential blood borne pathogen is to __________.

clean the blood spill with a 10% solution of bleach and water

Used oil should be __________.

collected by a local environmental service

A blood borne pathogen is transmitted by __________.

coming in contact with blood or other bodily fluid

Which type of customer service information stored in a database could help to improve product quality?

concerns customers have with specific products

Engineers working with manufacturing to become aware of tooling limitations and other problems that may increase production time and cost is an example of __________.

concurrent engineering

Reaching a __________ means that although the chosen solution may not be the first choice of everyone on the team, each member supports that solution as a viable option.

consensus

If you have even a minor accident at work, you should __________.

contact your supervisor immediately

Improving external customer satisfaction is the main objective of __________.

customer service departments

While using a cutting tool, always __________.

cut away from the body

Steam, hydraulic, spring tension, and compressed gases are all examples of __________.

dangerous energy

When using pneumatic tools __________.

do not use compressed air to clean clothing or skin

If the load obscures the view forward, the operator should __________.

drive the forklift truck in reverse

Hearing protection includes ear plugs, canal caps and __________.

ear muffs

A CO2 fire extinguisher is used for which type of fire?

electrical

__________ fires are considered Type C fires.

electrical

During a team meeting, any solutions to the problem being discussed that do not meet one or more of the must-have criteria should be __________.

eliminated

Production operation procedures would not normally be found in __________.

emergency manuals

Presence sensing is one type of __________.

emergency stop control

A safety officer should place __________ by the telephones in case they are needed.

emergency telephone numbers

Taking corrective action based on safety suggestions from employees will __________.

encourage employees to report safety suggestions

When inserting a pry truck under a load, the lip of the pry truck should __________.

engage the load as far as possible

Only employees who are authorized and trained are allowed to __________.

enter a permit-required confined space

Plant personnel should receive training and have proper authorization before __________.

entering a permit-required confined space

A(n) __________ customer is a person or organization that receives services or products in exchange for compensation.

external

Vendors could be considered what type of customer?

external

Attachment devices such as __________ are used to connect the load to the sling and the sling to the lifting device.

eyebolts and shackles

Welding creates a bright light that can damage the __________.

eyes

A __________ should be worn to protect the face from splashes or flying particles.

face shield

In a team, the __________ is one who will stimulate or guide the group to think of ideas.

facilitator

Working areas at 4 feet or higher require __________.

fall protection

First aid training enables a person to provide __________.

first aid until professional medical assistance arrives

The red diamond on the NFPA identification label represents the __________.

flammability level

It is most important to clearly label the containers of __________ material before shipping.

flammable

A well ventilated area designed for storage is the best place to store __________.

flammable materials

Never use a hand tool __________.

for anything other than its intended purpose

The first stage in a team development process is an awkward stage for the team members called __________.

forming

The __________ of the product describes the features required for the product to perform the tasks for which it was intended.

function

The procedure by which each person places his/her own lock and tag on a piece of equipment before performing work on it is called __________.

lockout / tagout

The 3 prongs of a 110-volt power tool's power cord plug perform what purpose?

one is the hot, one is the neutral and one is the ground

When attending to a person with possible broken bones you should __________.

only move the person if they are in immediate danger

After a regulator is installed on an oxygen cylinder, the cylinder valve should always be __________.

opened all the way to prevent leakage around the valve

A(n) __________ is any organic compound containing two joined oxygen atoms. This substance is highly explosive and sensitive to shock.

organic peroxide

A(n) __________ crane is mounted between two overhead runways.

overhead

The safety devices on an electric hoist include both mechanical and electrical __________ protection.

overload

Which of the following is considered an electrical hazard?

overloading a circuit

Hazard information on a GHMIS label is represented by __________.

pictograms, a hazard statement, and a signal word

Ear plugs should be replaced when they are no longer __________.

pliable

Open flames should not be used in a dust area because of __________.

possible ignition or explosion

Supervisors and/or safety committees should be made aware of __________.

possible improvements in ergonomics

Which device of the following requires a certified welder and recertification of the device after the weld?

pressure rated devices

An electrical lockout/tagout system is designed to __________.

prevent someone from energizing a circuit that is dangerous or being worked on

A lockout/tagout system __________.

prevents a piece of machinery from being energized while maintenance is being performed on it

A team leader is responsible for setting up internal quality audits to verify that __________.

procedures are in place and being followed

Teamwork, concurrent engineering, tools and techniques are needed in order to make __________ productive.

product introduction

To ensure that a team has __________ meetings, rules for team behavior should be enforced.

productive

The __________ should be informed if one of the contractors is creating or operating in an unsafe condition.

project manager

Outside contractors who are hired to clean permit-required confined spaces must provide __________.

proof of certification as confined entry personnel

Tetanus is a possible result from __________.

puncture wounds from a nail

When responding to a workplace accident do not __________.

put yourself in danger

A physical hazard resulting from a substance that may spontaneously combust when exposed to air is called __________.

pyrophoric

The bottom of a __________ respirator presses against the skin between the mouth and chin.

quarter-mask

Painting on a hard hat should be avoided because it might __________.

react with the composition of the headwear and reduce its effectiveness

Ergonomics guidelines help create a well-designed work setting that will __________.

reduce worker fatigue

In an area that consistently contains dust, or other combustibles you should __________.

remove all sources of ignition

The first thing to do before treating someone for electric shock is __________.

remove the source of electric shock

If you notice an employee acting in a manner that jeopardizes the safety of others, and you do not feel comfortable approaching that person, you should __________.

report the person to a supervisor immediately

Before workers work in areas that require __________, they should have a medical exam to determine if they have a pre-existing health problem.

respirators

The first step in inserting a foam ear plug is to __________.

roll and compress the plug between your thumb and forefinger

To treat a minor burn, you should __________.

run the burn under cool water

The document that identifies chemicals and sets limits for their use is called a __________.

safety data sheet

Machine guards that require the operator to be able to see the process should be made from __________ to protect the worker in case it breaks.

safety glass

When operating machinery, always wear __________ to protect your eyes.

safety glasses with side shields

The company handbook usually contains policies on a wide variety of topics, including __________.

safety regulations

When a customer service agent answers the phone, they should try to answer between the __________.

second and the fourth ring

You should wear gloves when handling sheet metal because __________.

sheet metal is very sharp and may cut you

Hazardous materials of different types __________.

should be stored separately

A training matrix or database that contains a list of employees and their specific skills __________.

should be used to assign people to jobs in areas where they already contain the required skills

The environmental coordinator __________.

should know the proper disposal procedures for waste material

When you give positive feedback, always make sure that you are __________.

sincere

A(n) __________ is a line consisting of a strap, chain or rope that is used to lift or pull a load.

sling

Regulations must always be followed when cleaning up __________.

small amounts of asbestos

All load hoist/movements must be done __________.

smoothly without jerking or abrupt movements

New and existing employees should receive training/cross-training with an experienced worker __________.

so that there is not a shortage of skilled workers due to employee retirement

Sharp objects can pierce the __________ of the shoe resulting in puncture wounds to the foot.

sole

Someone throws a cigarette into a trash can and the contents of the can catch on fire. The employee that notices the fire should __________.

sound the alarm

When a small fire is noticed near a cabinet of flammable materials you should first __________.

sound the alarm

At intersections, a forklift truck driver should __________.

sound the horn

__________ shoes provide foot protection against falling objects.

steel toe

When storing lubricants, never __________.

store lubricants with other flammable materials

Waste materials such as scrap metal in an open yard are a possible __________.

storm water contamination source

Leather shoes are worn during welding to protect the feet from __________.

stray drops of molten metal

Top level management must support a team for it to be __________.

successful

People working together discussing issues and making decisions are key elements of a __________.

successful work group

Do not leave a load __________ while the hoist is unattended.

suspended

Achieving a match between the worker, task, tools, and environment is called __________.

task matching

When a team is formed to tackle a problem, a __________.

team kickoff meeting is held to get everyone up to speed on the task and meet each other

When performing an electrical lockout/tagout, the last thing the worker should do is __________.

test the locked out equipment for power

The idea that each person has the right to know about the hazardous substances with which they work is written in __________.

the Hazardous Communication Standard

The only person that should turn on a piece of machinery is __________.

the assigned operator

A worker should not unload a truck if __________.

they do not understand a placard on the truck

An employer is responsible for having an SDS sheet for every chemical that __________.

they manufacture, sell or use

If an operator does not test equipment after it is locked out __________.

they should be retrained

Before lifting a load with a forklift, the load should be __________.

tilted back

A team should develop a spending plan as part of their decision making process __________.

to ensure that they do not exceed the amount of money allocated to the project

Personal protection devices, such as safety glasses and welding helmets, should be inspected __________.

to ensure they are not damaged and have a proper fit

New employees or contractors should be instructed on proper evacuation procedures __________.

to ensure they can exit the facility safely in case of an emergency

The first step in safely handling hazardous chemicals is __________.

to know the hazards about the chemical you are handling

Employers should provide training in the use of personal protective equipment __________.

to reduce the employee's risk of hazardous material exposure

The equipment manufacturer is often the best source of __________.

training on a new piece of equipment

A bucket should be used to __________.

transfer tools up and down a ladder

The Department of Transportation (DOT) oversees the __________.

transportation of hazardous materials

When attempting to lift a long I-beam, use at least __________ strap(s) that is(are) __________.

two, placed equally from the center

You should never __________ because it might cause damage.

use compressed air to clean clothing

All electrical circuits should be deenergized before maintenance by __________ to prevent accidents.

using lockout procedures

The use of eye protection and proper electrical grounding are important when __________.

using power tools

An employee that is promoted __________.

usually receives additional training for the new position

Zero tolerance is a typical company policy to address __________.

violent behavior

When using an electric sander be sure to __________.

wear respiratory protection

You should always know the __________ of any load you are going to move.

weight

Always face the ladder when __________.

when climbing and descending

The dates and charge on the fire extinguishers should be checked __________.

when performing a monthly inspection of fire system

A person should always face the ladder __________.

with no exceptions

Gloves and safety glasses are necessary when working with __________.

with sharp or rough sheet metal

Job shadowing requires a employee that is being cross-trained to __________.

work closely alongside an experienced worker as their shadow

The advantage of ISO standards is that it provides a single set of guidelines that should be followed __________.

worldwide

Communications skills used by team members should include __________, oral communication, written comprehension, and listening skills.

written communication

The __________ fire extinguisher does not leave a harmful residue and is sometimes used to put out fires on planes or expensive computer equipment.

Halon

A good manager will attempt to develop a compromise between two workers who __________.

Have developed a conflict

You should always use your legs when __________.

Lifting heavy objects

__________ is a silvery liquid that when spilled emits an extremely toxic vapor into the air.

Mercury

A __________ is used to establish a baseline measurement for evaluation of the process.

Metric

The __________ labeling system was designed to help firefighters in the event of an emergency.

NFPA

An odor is added to __________ so that it is detected easier.

Natural gas

Customer satisfaction should always be the first objective considered when developing __________.

New or improved products

Every person in the company is responsible for __________.

Preventing unsafe conditions

A power tool's operation manual generally contains information about the __________.

Safety and operation rules

When working in areas that have extreme respiratory conditions, such as a confined space with toxic fumes, a __________ should be used.

Self-contained breathing apparatus

Company objectives and production goals are important pieces of data to a __________.

Self-directed work team

Which of the following is not used as a problem analysis tool?

Shipping manifest

The materials loaded onto a truck and their potential hazards are identified by __________.

Shipping manifests

A(n) __________ forklift is a powered industrial truck (PIT) that the operator sits in and drives like a car.

Sit Down

A paper fire can be safely extinguished using a Class __________ fire extinguisher.

A

The action taken to treat an injury until medical help arrives is called __________.

First aid

Promoting competition among teams or departments __________.

Is not a reason to set measurable team goals

A suitable eyewash station should provide continuous water flow for at least __________.

15 minutes

OSHA defines air as oxygen-deficient if it contains less than __________ percent oxygen.

19.5

A flammable liquid falls into which category number in the DOT hazardous material identification system?

3

A forklift operator should maintain a distance of __________ vehicle lengths from other powered industrial trucks.

3

A ladder should extend at least __________ (feet) above its point of contact with the roof.

3

OSHA has set the permissible noise level at __________ decibels for an eight-hour period.

90

To avoid potential fires, combustible materials must be kept a minimum of __________ feet from any potential ignition sources.

35

When using an extension ladder, the distance the foot of the ladder is set from the house should be about __________ the height of the extension.

43469

One method used by __________ to get a team started in the right direction is to sequence the start up activities.

A team leader

__________ must know all the team roles.

A team leader

Scaffolding may be tied off on which of the following?

A truss

A step ladder is sometimes referred to as a(n) __________.

A-frame ladder

A safety team may decide a safety audit is required when __________.

An accident occurs involving an oil spill

An employee should perform an immediate emergency shutdown of their machine and evacuate the building if __________.

An evacuation alarm goes off whether or not there is a sign of danger

Demonstrating the skills and abilities learned is a common component of a(n) __________.

Apprentice program

The human resources department is the most common source of information about __________.

Appropriate behavior

Teams should strictly enforce rules about __________ to minimize conflict.

Arguing

Safety guidelines do not permit __________ to be removed by unauthorized personnel.

Asbestos

When is the best time to offer safety-related training to employees?

At new employee orientation

Priority jobs should be discussed __________.

At the beginning of shift meetings

Effective training in air powered tools helps employees __________.

Avoid work hazards

In which of the sling arrangements shown is Sling Leg 1 (SL1) experiencing the greatest load?

B

Blood or other bodily fluids are a source of transmission from one person to another of __________.

Bloodborn pathogens

In the United States, the __________ requires placards representing the classification of hazards on board a truck transporting hazardous materials.

Department of Transportation

The role of the __________ is to provide a safe, efficient and accessible transportation system to the American people.

Department of Transportation

__________ is a design methodology that designs features into the product that make it cheaper to manufacture while maintaining its ability to perform its intended function.

Design for Manufacturing and Assembly (DFMA)

__________ are cylindrical pieces of foam stamped from a foam sheet.

Disposable PVC foam plugs

To prevent fire hazard, the following action should be taken.

Dispose of rags promptly

To allow for proper fire protection, which of the following is important?

Doorways are closed and paths are clear

Data results are required to be made available to employees who participate in __________.

Environmental tests

Adapting the work area to fit the person to reduce stress is called __________.

Ergonomics

OSHA provides regulations to limit the __________.

Exposure to noise

An SDS sheet should be locked away in a file and only available to a worker under certain conditions.

FALSE

A wet floor is a common cause of __________.

Fall accidents

If a worker gets a caustic chemical in his or her eyes, what is the first action that should be taken?

Flush eyes with water

It is especially important that employees stay within marked pedestrian aisles when walking through a plant if __________.

Forklifts are being used

__________ are formed when a solid, such as a metal, is heated above its boiling point and then condensed in cool air.

Fumes

Anyone who notices another employee engaging in an unsafe practice should __________.

Give constructive input to the employee to encourage good safety practice

The primary place to look for information regarding shipment of specific hazardous materials is the __________.

Hazardous Materials Table

Hazardous waste is a substance that is no longer wanted that meets the criteria of a __________.

Hazardous material

The emergency response team should be notified immediately if you observe a(n) __________.

Hazardous material spill

It is especially important that proper labeling be used with all __________.

Hazardous waste containers

Hazardous material training should include which of the following?

How to read SDSs

OSHA conducts inspections for a number of reasons, which are categorized into four priority levels according to their severity. A Priority 1 indicates __________.

Imminent danger - a danger that may cause death or serious physical harm

Back injuries are most commonly caused by __________.

Improper lifting

__________ gloves protect against electrical surges.

Insulated gloves

A vehicle is overloaded when __________.

It carries too much weight

The specific tasks an employee will be required to perform are described in __________.

Job descriptions

Many products cannot be disposed of using a trash compactor before sending to a landfill. These include: fluorescent light bulbs, spray cans containing all or some of the product, and __________.

Liquid dyes

Interrupting the power circuit at the motor disconnect is the only reliable way to __________.

Lock out a motor

When a supervisor is aware of a personal argument between two employees, what should he/she do first?

Make sure there are no threats to an employee's safety

A(n) __________ interlock physically prevents a machine's operation when the guard is out of place.

Mechanical

__________ hazards include anything that can cause cuts, scrapes, punctures or impacts.

Mechanical

The PEL (Permissible Exposure Limit) for exposure to hazardous substances are set by __________.

OSHA

Which agency suggests that a worker inspect and test all equipment, assuming all to be energized until proven deenergized?

OSHA

__________ is the federal agency that publishes and enforces safety and health regulations for companies in the United States.

OSHA

A copy of the relevant OSHA standard must be available to workers who attend __________.

OSHA required training

OSHA stands for __________.

Occupational Safety & Health Administration

A worker should clean up a small spot of liquid on the floor immediately if the liquid is __________.

Oil

Drains should be protected when unloading __________.

Oil

Which of the following situations is considered a safety hazard in the plant?

Oil spots on the floor

You should immediately report __________ to reduce the possibility of other complications.

On-the-job injuries

When can another employee's lockout lock be removed?

Only after all of the above have been done.( When you have confirmed that the employee is not at the facility. When you have made all reasonable efforts to inform the employee that his/her lock has been removed. When you have confirmed that the employee is aware of the lock's removal before he/she resumes work).

__________ respirators purify the air by filtering the air to reduce the concentration of substances such as dusts, mists and fumes.

Particulate removing

Project management should include a __________ to enable team leaders on other projects to identify availability of potential team members.

Planned release of personnel as the project comes to an end

The training department is the typical source of __________ information.

Procedures and policy

__________ should not be placed near an ignition source because it is explosive.

Propane

Product designers should always consider the effects of tooling design and cost during __________.

Prototype development

__________ wounds are caused by narrow sharp objects penetrating deep into the skin tissue.

Puncture

A worker should always place both feet shoulder width apart and bend at the knees before __________.

Reaching down to pick up a heavy object

The components NOT usually used to prevent entry into a machine during operation are __________.

Regulators and valves

Carpal Tunnel Syndrome is a condition caused by __________.

Repetitive movements

__________ is the act of securing a load to prepare it for a lifting operation.

Rigging

If safe handling information about a chemical cannot be found on its chemical label, its __________ should be checked.

SDS

The __________ identifies chemicals and sets limits for their use.

SDS

When selecting a new chemical to use in the plant, its __________ should be reviewed as part of the decision making process.

SDS

A walk-through safety inspection is performed by the company's __________.

Safety Committee

Everyone in the workplace is responsible for __________.

accident prevention

Everyone is responsible for __________.

accident prevention

An eyewash station is required within a 10 second walk of workers who use __________.

acids or caustics on a daily basis

Pedestrian walkway areas that need to be cleanable should not have __________.

added traction

Compressed __________ can be used for cleaning work surfaces as long as the dead-headed pressure does not exceed 30 psi.

air

Line breaking procedures should include de-energizing lines, testing prior to start up, and __________.

all valves are closed and locked out using lockout/tagout procedures

When drilling a hole in a part using a drill press, __________.

always firmly clamp the material

The team leader or supervisor should immediately be told of __________.

any industrial injuries

When performing a lockout/tagout procedure you should __________.

apply your own lock, tag, and test for power

One or more hoses crossing a main walkway __________.

are not acceptable

If you are the only trained first aid provider at the scene of an accident, you should __________.

ask a bystander to call 911 while you attend to the victim

Customer service refers to the people and other resources a company devotes to __________.

assisting customers

Communicating __________ is important when training employees.

at the appropriate level

If you notice a forklift truck driver operating the forklift while falling asleep, you should first __________.

get them off the forklift

Dead lead-acid batteries from cars, trucks or industrial vehicles such as forklifts should be __________.

given to a battery recycler

__________ are similar to safety glasses except that they provide a tighter fit.

goggles

One of the simplest, but slowest methods of recycling oil is __________.

gravity separation

A worker should immediately lockout a machine if he or she finds the __________.

guard has been bypassed

Safety features on manlifts include __________, automatic brakes, and emergency shutoffs.

guard railing

Safe work __________ are a means of ensuring all precautions have been taken when a worker has to perform tasks in a situation that may endanger his or her safety or health.

habits

Screwdrivers are a frequent cause of injury to __________.

hands

A hazardous material may be defined as any material that __________.

harms a person, property or the environment

Call 911 immediately if you notice that another worker __________.

has swallowed a cleaning chemical

Supervisors should set measurable objectives to __________.

have good performance criteria for review of employee performance

Ground fault protection ensures that hand tools __________.

have protection from electric shock

A(n) __________ is a labeling system designed to quickly and accurately identify hazardous materials.

hazardous material identification system

When working under equipment or personnel, __________.

head protection is needed

A __________ is a chemical that has been scientifically proven to cause acute or chronic health problems to the exposed person.

health hazard

In areas where noise levels are excessive, __________ should be utilized.

hearing protection

Mirrors help make a safe pedestrian walkway by __________.

helping control blind spots

Human caused emergencies may be broken down further into two sub-categories __________ and accidental.

hostile

First aid is __________.

immediate care given to an injured person until professional medical personnel arrive

Oil spots should be cleaned __________.

immediately

When an alarm sounds, you should initiate emergency shutdown procedures and evacuate __________.

immediately

In terms of safety, everyone is responsible for reporting __________.

improperly guarded equipment

The forces created on a sling __________ as the angle (from horizontal) of a sling's legs decrease.

increase

While moving a load, turning at the waist will __________.

increase the chance of back injury

An assessment of safety and environmental compliance is required when __________.

installing new equipment

A(n) __________ machine guard prevents a machine from turning on if the guard is not in place.

interlocked

Documentation on the quality of a training session __________.

is not required

Because of toxic vapors, use of a breathing apparatus __________.

is required when working in identified confined spaces

An average worker's productivity would be included in __________.

job standards description

To be successful in achieving a goal, a __________ must be capable of bringing people together, motivating them and finally focusing them in the right direction.

leader

What is required to enter a confined space?

licensure or certification

The __________ is the part of a personal fall arrest system that attaches to the building structure.

lifeline

A class C fire is one that consists of burning __________.

live electrical lines or equipment

A pneumatic lockout/ tagout uses a __________ to prevent use.

lockable valve

To prevent a worker from being injured in a fall, __________.

oil and water spots should be wiped up immediately

In customer service, it is important to __________.

look into the customer's problem, find a solution, and follow through

If the load being carried by the forklift obscures the operator's forward view, the operator should __________.

look over their shoulder and drive in reverse

Loose fitting sleeves with open cuffs is a safety violation for __________.

machine operators

In the event of a fire, it is important to __________.

maintain a clear path to the exit

Keeping your work bench clean and following all safety rules are essential to __________.

maintaining a safe work area

When using a power tool __________.

make sure all guards are in place

When a team sets objectives that they wish to accomplish, care should be taken to ensure that these objectives are __________.

measurable

A flash drive (also known as a keychain or jump drive) or a floppy disk is used to store data that __________.

might need to be viewed or printed from a computer in another location

When team members reach a significant point in their work to improve a process, it is called a __________.

milestone

Cool water is an appropriate treatment for __________.

minor burns

A person should replace a component in a live electrical circuit __________.

never

When is it ok to use a hoist to lift something that weighs more than the rating on a hoist?

never

When performing work on equipment you should __________.

never work on a live electrical circuit

Potential hazards associated with equipment should be identified when __________.

new equipment is being designed for a process

Class G hard hats are __________ and provide some protection from contact with live electrical circuits. They are tested at 2200 volts.

non-conductive

Clothing worn to protect against electrical shock must be __________.

non-conductive

When circumstances at work create a dangerous situation, you should __________.

not proceed until the dangerous situation is eliminated

If a large quantity of liquid is spilled into a sanitary sewer, the worker that discovers it should __________.

notify their supervisor or team leader immediately so the appropriate authorities can be contacted

Measurable __________ are important to the training process.

objectives

One of the best ways to learn how to operate an unfamiliar machine is to __________.

observe an experienced operator