Shop Safety for Principles
Which of the following is supplied by material safety data sheets?
Ventilation requirements What to do if swallowed How to dispose of material
What percentage of all shop injuries occur to the eyes?
15 percent
What safety device should be worn when there is danger of fragments being thrown?
Clear face shield
Which of the following is NOT a basic emergency procedure?
Call the victim's relatives
What percentage of all injuries occur to the eyes?
A. 15 percent
Never operate electric tools outdoors or in wet conditions unless circuit is protected by what?
A. A ground fault circuit interrupter
Many tools have sharp edges that are known as which of the following?
A. Pinch points
Always check the work area for potential hazards before beginning work.
A. True
Earmuffs should be worn when using a specific tool for a short period.
A. True
It is always recommended to use the appropriate tool for the job.
A. True
It is important to develop safe work habits.
A. True
Loose fitting clothing is not acceptable when working in the shop.
A. True
Natural fibers, such as wool or cotton, will give a better protection when welding than synthetic fibers like polyester.
A. True
Noise from some types of equipment can exceed 120 decibels.
A. True
Safety is the condition of being safe from risk or danger.
A. True
Students should learn to recognize hazardous situations and how to protect themselves.
A. True
What should you do to stop bleeding of a cut or abrasion?
Apply direct pressure
What is the unit of measurement for expressing the intensity of sound?
B. Decibel
Accidents are a minor cause of death and injury for persons one to 37 years of age.
B. False
Face shields provide excellent eye protection.
B. False
Gloves should be worn at all times when working in the shop
B. False
It is not necessary that equipment be in good working order or adjusted properly.
B. False
Oily rags should be stored in a container with a loose fitting lid.
B. False
Shop safety is not an important issue for students or teachers.
B. False
Tools with frayed cords are okay to used until the cord is replaced.
B. False
When welding, polyester and rayon offer better protection than wool or cotton.
B. False
When working in the shop, short sleeves, shorts and lace-up shoes are acceptable.
B. False
Under which of the following circumstances is hearing most likely to be damaged?
B. Loud noise for long period of time
What does "PPE" stand for which of the following?
B. Personal Protective Equipment
What mark appears on the frame of industrial quality safety glasses?
C. Z87
What should you do to treat a severe burn?
Cover with clean, dry cloth
What should persons who wear prescription glasses do to protect their eyesight?
D. Either B or C
Which of the following is NOT a type of "PPE" protection?
D. Mechanical protection
Gloves should be worn near moving machinery.
False
When welding, pockets on clothing should not have flaps?
False
What should you do if chemicals are splashed into a person's eyes?
Flush with water
What device senses short circuits and stops electrical flow when ground faults occur?
Ground fault circuit interrupter
What should you do if a person breaks an arm?
Immobilize the arm Keep the person calm
What should you do if a penetrating eye injury occurs?
Immobilize uninjured eye
How should flammable materials be stored?
In safety cans In cabinets designed for storing flammable materials
Which of the following can provide fuel for fires?
Lumber scraps Oily rags Sawdust
Where can you find handling and emergency information on chemicals used in the shop?
Material safety data sheets
Which of the following is NOT one of the four common types of potential shop hazards?
Physical
Which of the following are fire hazards commonly found in the shop?
Sawdust Lumber scraps Oily rags
What should you do if chemicals are splashed on a person's skin?
Stop the burn process Remove saturated clothing Flush with water
