TD 46 Daily Questions

Deviations in altitude ( < _____ feet) should be corrected by adjusting pitch attitude with the cyclic beep trim switch if airspeed can be maintained plus or minus _____ KIAS> In all other cases, a power change should be made.

- 100 - 5

What is the maximum bank angle recommended under instrument conditions?

- 30 degrees

Level off should be accomplished by adjusting power to cruise torque beginning _____ feet ( ____% the rate of climb or descent) prior to the desired altitude.

- 50 - 10

A change of approximately one FLI will result in _____ FPM climb or descent. This equates to a _____% change in torque from cruise flight.

- 500 - 10

An aircraft is flown in instrument flight be controlling _____ and _____, as necessary to produce desired performance.

- Attitude - Power

Which instrument should always be used if available because it instantly portrays the actual bank and pitch of the aircraft and is the central focus of a good cross check?

- Attitude indicator

Concerning a standard rate turn: The turn is initiated with reference to what instrument? The desired angle of bank is how many degrees and why? In a standard rate turn, how many degrees does the aircraft heading change per second, in ten seconds, and in one minute?

- Attitude indicator - 15 degrees - 3 degrees/sec, 30 degrees/10 sec, 180 degrees/one minute

In general, the most important instruments to watch during any particular maneuver associated with tasks 1166.01 through 1166.06 are those ______ ______

- Held constant

In calm air the aircraft will _____ heading and altitude with _____ input from the pilot, if the attitude and power are set correctly.

- Maintain - No

What are the four elements of control?

- Pitch -Bank - Power - Trim

When making turns to a predetermined heading the bank angle should never exceed what?

Bank angle should never exceed the number of degrees in the turn