Testout 7.3-7.4

Which of the following must each device's MTU be set to for jumbo frames to transverse the network without risk of fragmentation?

9,000

Which of the following BEST describes Ethernet flow control?

A configuration that sends a pause frame to the transmitting device when the receiving device cannot keep up with the volume of data being sent.

Which of the following BEST describes an ARP spoofing attack?

An attack that associates an attacker's MAC address with the IP address of a victim's device.

Computers A and B are on the same VLAN and are separated by two switches as shown in the exhibit. Computer A sends a frame to Computer B. Which of the following BEST describes the frame's composition as it travels from A to B?

Computer A sends a normal frame. The first switch appends a VLAN ID to the frame. The second switch removes the VLAN ID before forwarding it to Computer B.

You have just connected four switches as shown in the Exhibit. Assuming the default switch configuration, how can you force switch C to become the root bridge?

Configure a priority number of 4096 for switch C.

You are the network administrator for a city library. Throughout the library are several groups of computers that provide public access to the internet. Supervision of these computers has been difficult. You've had problems with patrons bringing personal laptops into the library and disconnecting the network cables from the library computers to connect their laptops to the internet. The library computers are in groups of four. Each group of four computers is connected to a hub that's connected to the library network through an access port on a switch. You want to restrict access to the network so that only library computers are permitted connectivity to the internet. What can you do?

Configure port security on the switch.

Which of the following scenarios would typically utilize 802.1x authentication?

Controlling access through a switch.

Which of the following is a method of VLAN hopping?

Double tagging

Which statements accurately describe the port states of both bridges and switches? (Select two.)

In the learning state, the MAC address table can be populated, but frames are not forwarded. Ports in a blocked state still receive BPDUs.

An attacker hides his computer's identity by impersonating another device on a network. Which of the following attacks did the attacker MOST likely perform?

MAC spoofing attack

Which of the following BEST describes port aggregation?

Multiple ports linked together and used as a single logical port.

You have a large Power over Ethernet flat screen that you are installing in a conference room that requires 70 watts of power. Which of the following IEEE standards does your PoE switch need to provide power for the flat screen?

PoE++ Type 4

Your organization's management wants to monitor all the customer services calls. The calls are taken on VoIP phones. Which of the following configurations would BEST help you set up a way to monitor the calls?

Port mirroring

Which of the following switch features allows you to configure how the switch's MAC address table is filled?

Port security

You manage a single subnet with three switches. The switches are connected to provide redundant paths between themselves. Which feature prevents switching loops and ensures that there is only a single active path between any two switches?

Spanning Tree

Which of the following switch attacks bypasses the normal functions of a router to communicate between VLANs and gain unauthorized access to traffic on another VLAN?

Switch spoofing

You manage a network with two switches. The switches are connected together through their Gigabit Ethernet uplink ports. You define VLAN 1 and VLAN 2 on each switch. A device on the first switch in VLAN 1 needs to communicate with a device on the second switch in VLAN 1. What should you configure to allow communication between these two devices through the switches?

Trunking

You have two switches connected together as shown in the following diagram. How many broadcast domains are in the network?

Two

Which of the following attacks manipulates a switch's auto-negotiation setting to access a virtual local area network that's connected to the same switch as the attacker's virtual local area network?

VLAN spoofing

Drag each description on the left to the appropriate switch attack type on the right.

ARP spoofing/poisoning The source device sends frames to the attacker's MAC address instead of to the correct device. Dynamic Trunking Protocol Should be disabled on the switch's end user (access) ports before implementing the switch configuration into the network. MAC flooding Causes packets to fill up the forwarding table and consumes so much of the switch's memory that it enters a state called fail open mode. MAC spoofing Can be used to hide the identity of the attacker's computer or impersonate another device on the network.