vocab
98. how can you change a block from invisible to visible?
- - -
14. Circle command
- - - -
15. List Command
- - - -
16. Arc Command
- - - -
20. LTSCALE
- - - -
27. Array Command
- - - -
28. Selecting Sets
- - - -
29. Hatching
- - - -
30. Blocks
- - - -
31. Fillets
- - - -
32. Layer
- - - -
33. Properties Pallet
- - - -
35. Text Command
- - - -
36. Dimension Styles
- - - -
42. Offset Command
- - - -
46. Mtext command
- - - -
56. Mirror
- - - -
7. Drawing Units
- - - -
88. Constraints
- - - -
38. Polar Tracking
- - - - -
63. spline
- - - - -
90. which of the following can be used as a boundary for a hatch?
- - - - -
37. Grips
- - - - - -
34. Measuregeom Command
- - - - - - - -
6. Limits
- - - -
59. which of the following relative operators are available for filtering data when using the QSELECT command?
- * - / - = - < - >
44. Which of the following symbols can be used to stack selected mtext manually?
- * - ^ - / - # - ~
43. Which of the following options are available for AutoCAD SHX (shape) fonts?
- 0 degrees - -22 degrees - 22 degrees - 86 degrees - -86 degrees
25. Which of the following positions describe quadrant points on a circle?
- 0 degrees - 30 degrees - 60 degrees - 90 degrees - 180 degrees
8. If a drawing is set to architectural units, which of the following can you enter to specify a line length of 11 ¾"?
- 11.75" - 11.75 - 11 ¾ - 11-3/4 - 11 ¾"
1. Which workspaces are available by default in the AutoCAD 2015 software?
- 3D Basics - 3D Animation - 3D Modeling - 2D Modeling - Drafting & Annotation
26. Which of the following points can be selected using the Endpoint object snap?
- A corner of a rectangle - The center of a circle - The end of an arc - A vertex of a polygon - The midpoint of a line
5. Which of the following tasks can you accomplish using the Application Menu?
- Access the Options dialog box - Open a new drawing - Specify the limits for a drawing - Specify the units and precision for a drawing - Toggle the display of file tabs
2. Which of the following method of starting the AutoCAD software?
- Access the windows start menu, select run..., and enter autocad.exe - Right-click on the windows desktop and select AutoCAD 2015 from the shortcut menu - Double-click the AutoCAD 2015 icon on the Window desktop - navigate to the autodesk website and double-click autocad 2015
45. Which of the following options are available for AutoCAD SHX (shape) fonts?
- Backwards - Bold - Italic - Underscore - Vertical
10. Which of the following can you enter at the select objects: prompt to select objects that lie partially within the selection boundary?
- C - W - CP - WP
50. Which of the following can you use to extend two lines segments to meet exactly at sharp point?
- CHAMFER command with a distance of 0 - Extend mode of the extend command - Extend mode of the trim command - Fillet command with a radius of 0 - lengthen command with a delta of 0-
39. Which of the following operations can you complete using the OFFSET command?
- Create an exact copy of a line at a specified distance from the original - Create an exact copy of an arc at a specified distance from the original - Create a circle concentric with an existing circle - Create an arc concentric with an existing arc - Create an exact copy of a line through a specified point
72. which of the following commands continues dimensioning from a previously placed dimension?
- DIMANGULAR -DIMBASELINE -SIMCONTINUE -DIMJOBLINE -DIMLINEAR
80. Which of the following commands allow you to space dimensions equally?
- DIMBASELINE -DIMBREAK -DIMORDINATE -DIMSPACE -MATCHPROP
19. Which of the following operations are possible on a locked layer?
- Drawing a new object - Editing objects - Erasing objects - Selecting objects - Displaying objects on-screen
4. Which of the following methods can you use to close an AutoCAD drawing file?
- Enter CLOESFILES at the keyboard - Pick the Close button on the drawing window title bar - Pick close in the Application Menu - Right-click in the drawing area pick close... - Select close and then select current drawing in the application menu
51. Which of the following commands can resize a rectangle from 2"x 4" to 2" x 8" in a single operation?
- Extend - join - lengthen - scale - stretch
17. Which line widths are recommended by ASME Y14.12?
- Extra fine - Thin - Thick - 3x - 4x
41. Which of the following are primary 2D orthographic views for a mechanical part drawing?
- Front - Rear - Auxiliary - Central - Top
3. If you cannot view the online version of the help window, you can force autocad to display the installed help system by deselecting the access online content when available check box in which of the following locations?
- InfoCenter - Options dialog box, system tab - Application menu, drawing utilities menu - Status bar
11. Which command allows you to draw a rectangle?
- LINE - PLINE - RECTANGLE - DONUT - POLYGON
12. If you use the Rotation option of the ELLIPSE command and specify a rotation of 45, AutoCAD creates a circle rotated 45 degrees from which of the following?
- Line of sight - Major axis of the ellipse - Minor axis of the ellipse - X axis - Z axis
9. Which command or commands allows you to undo more than one operation at one time?
- OOPS - REDO - U - UNDO
21. Which of the following actions enters a view command or drawing aid transparently?
- Picking the button on the status bar - Picking the button on the ribbon - Picking the button on the navigation bar - Typing a colon (:) before the command name - Using the mouse wheel
40. Which of the following operations can you complete using the MEASURE command?
- Place point objects anywhere in the drawing area - Convert point objects into blocks - Break the circle into specified number of pieces - Place point objects at specified number of equally spaced locations on an arc - Place point objects specified intervals along a line
24. Which of the labeled points shown can you select using the AutoSnap feature, without entering an object snap override, if the Midpoint, Endpoint, and Center objects snaps are set as running object snaps?
- Points A, B, and C - Points A, C, and D - Points A, B, D, and E - Points A, B, C, and E - Points A and E only
23. When a drawing contains two or more model viewports, how can you activate a different viewport?
- Press the [F3] key - Press the space bar - Pick anywhere in the viewport to activate - Right-click and select the view to activate
13. When you use a 2-Point option of the circle command to create a circle, which of the following is defined by the points you specify?
- Radius of the circle - Circumference of the circle - Diameter of the circle - Area of the circle
22. How can you display a named view in a drawing?
- Select the view from the list in the Views panel of the View ribbon tab - Type the view name at the command line - Double-click the view name in the View Manager - Right-click and select the view name
18. Which of the following line characteristics would you typically assign to a layer for drawing object lines on a mechanical part view drawing?
- Thick, HIDDEN linetype - 4x, Continuous linetype - Extra fine, Continuous linetype - 0.3mm, Continuous linetype - 0.6mm, Continuous linetype
47. How can you insert a diameter symbol into single-line text?
- Type %%D - Type %%C - Type (D) - Select it from the symbol flyout menu on the Text Editor ribbon tab - Right-click and select Diameter
52. Which keyboard key or keys can you press to trim an object while the extend command is active?
- [alt] - [ctrl] - [f2] - [shift] - [shift]+[ctrl]
87. what type of dimension can you place instead of a dimensional constraint if a dimensional constraint would over-constrain the drawing?
- annotational distance -construction dimension -dynamic dimension -inferred dimension -reference dimension
71. how can you add a symbol to dimension text?
- apply control codes or characters - create a dimension style that references the gdt.shx font - hold[ctrl] and press an appropriate letter key - press an appropriate function key - use the mtext option of the dimensioning command -use the text option of the dimensioning command
54. In which order do you pick the source and destination points, when using the align command?
- destination point 1, destination point 2, source point 1,source point 2 - destination point 1, source point 1, destination point 2, source point 2 - destination point 2, source point 2, destination point 1, source point 1 - source point 1, source point 2,destination point 1, destination point 2 - source point 1, destination point 1, source point 2, destination point 2
48. What is the name of the file in which autocad stores the default custom dictionary?
- dictionary.smp - sample.cus - sample.dct - sample.dic - sample.dwt
49. Which of the following tasks can you perform using a field?
- display the data a drawing was created - display drawing properties in the drawing - change the name of the drawing - change the name of the layers - update property displays to reflect their current status
57. Which of the following operations can be performed using grips?
- exploding a polygon into individual lines - reflecting an object to create a mirror image - reversing the order of point calculation for an object - rotating an object by 17(degree) - scaling an object to half its current size
60. which of the following operations can you use to convert all of the curves in a polyline to straight segments?
- hover over the midpoint grips on each curve and select convert to line - select the polyline, right-click, and select polyline and decurve - use the pedit decurve option - use the pedit fit option - use the straighten option of the pedit edit vertex option
53. Which of the following can you do using the move command?
- move objects relative to their current location - move objects from a base point to a second specified point - rotate objects during the move operation - use the first point you pick as the point of displacement - use a scale factor
55. In the array shown below, what would you enter for the row and column offset?
- row offset 1.00, column offset 2.00 - row offset 2.00, column offset 1.00 - row offset 2.00, column offset 4.00 - row offset 4.00, column offset 2.00 - row offset 5.00, column offset 6.00 - row offset 6.00, column offset 5.00
58. If you do not use the base point option of a grip command, which point does autocad automatically select as the base point for the grip editing operation?
- the lower-left corner of the object - the origin (0,0,0) - a point you specify - the selected grip
96. which of the following tools can you use to change attribute modes after an attribute has been created?
--ATTEDIT -ATTREDEF -BATTMAN -EATTEDIT -PROPERTIES PALETTE
70. which of the following is the minimum ASME-recommended spacing from the object to the first dimension line?
-.375" -.5" -.75" -10mm -19mm -12mm
73. to comply with the ASME standard, what should the Offset from origin setting be when you use the DIMORDINATE command and dimension to a centerline?
-0 -.012 -.063 -.12mm -1mm -1.5mm
102.how many visibility parameters can you assign to a block?
-1 -2 -4 -16 -unlimited number
78. what is specified dimension in the tolerance shown here?
-10.17 -10.50 -10.60 -10.62 -10.67
112. a drawing of a mechanical part is set up to be printed at a scale of 2:1 in a layout in paper space. the length of one feature on the part is 35.125." how long should that feature be drawn in model space?
-3.513" -17.563" -35.125" -70.250"
64. which of the following expressions in QuickCalc adds 3.7, 4.2 and 8.5, then divides the result by the sum of 9.8 and 17.4?
-3.7+4.2+8.5[divided by symbol]9.8+17.4 -(3.7+4.2+8.5)[divided by symbol](9.8+17.4) -3.7+4.2+8.5/9.8+17.4 -(3.7+4.2+8.5)/(9.8+17.4) -=sum(3.7+4.2+8.5)/sum(9.8+17.4)
84.in the table that uses the down direction, what is the cell identification fro a cell in the fourth row from the top, in the fifth column from the left?
-4E -5D -D4 -D5 -E4
97. which of the following commands allow you to add attributes to a block without exploding the block?
-ATREDEF -BEDIT -EATTEDIT -FIELD -REFEDIT
99. which of the following commands can be used to save a dynamic block?
-BACTION -BTESTBLOCK -BPARAMETER -BSAVE -BSAVEAS
94.which of the following can you use to insert a block into a drawing?
-BLOCK COMMAND -DESIGNCENTER -INSERT COMMAND -TOOL PALETTES PALETTE -WBLOCK COMMAND
65. which of the following commands can you use to find the length of a line?
-DBLIST -DIST -LIST -MEASUREGEOM -TIME
115. which of the following file types can be referenced into a host drawing?
-DGN -DOC -DWFX -PDF -XLS
75. which of the following commands can be used to dimension an arc?
-DIMARC -DIMCENTER -DIMJOGGED -DIMJOGLINE -DIMRADIUS
110. which of the following methods can you use to create a floating viewport?
-EXPORTLAYOUT COMMAND -PLOT COMMAND -VIEWPORTS DIALOG BOX -LAYOUT VIEWPORTS PANEL ON THE LAYOUT RIBBON TAB VPCLIP COMMAND
79. which of the following commands can you use to add a prefix to an existing linear dimension value?
-TEXTEDIT -DIMEDIT NEW OPTION -DIMLINEAR MTEXT OPTION -DIMTEDIT -QDIM EDIT OPTION
81. which of the following commands allow you to adjust the location and alignment of dimension lines?
-TEXTEDIT -DIMSPACE -DIMTEDIT -QDIM -STRETCH
108.which of the following plot style tables can you use in a drawing that uses named plat styles?
-acad.stb -fill patterns.ctb -grayscale.ctb -monochrome.stb -my plot style table.stb
103.which of the following actions can you perform using the sheet set manager?
-add sheets to a sheet set -change the name of a sheet set data file -organize files related to a project -open drawing files that conation layouts referenced in a sheet set -purge unused blocks from a sheet set
82.what is the meaning of the formula =((C3*D2)/4)?
-add the values of c3 and d2 and divide the result by 4 -multiply the values of both c3 and d2 by 4 and add the results -multiply the value of c3 by the value of d2 and divide the results by 4 -divide the value of d2 by 4 and multiply the results by the value of c3
68.what is the term for a dimension style in which all text reads from the bottom of the sheet?
-aligned dimensioning -polar dimensioning -rectangular dimensioning -unidirectional dimensioning
86. which of the following are forms of dimensional constraints?
-annotational -construction -dynamic -geometric -static
117. which of the following terms describes a nested xref that is not displayed in the host drawing?
-attached xref -reloaded xref -parent xref -overlaid xref
113. which of the following statements are true about blocks?
-attributes included in an annotative block automatically become annotative even if they are not set to be annotative -attributes included in an in an annotative block change according to the annotation scale, but the block remains fixed -you can make a block annotative when you originally create the block -you can make a block annotative after its creation by using the properties palette
77.which of AutoCAD tolerancing method can use to create an unequal bilateral tolerance?
-basic -deviation -limits -none -symmetrical
92. a drawing has five layers: (0 white), (object blue), (dimensions red), (center yellow), (hidden green). if you create objects on the layer 0 layer, assign the objects an absolute color of green, create a block of the objects, and then insert the block on the objects layer, what color will the block be?
-blue -green -red -white -yellow
109. which of the following drawing elements should you typically create in paper space?
-border -drawing views -general drawing notes -threads notes -title block
67.which of the following items are common components of a dimension?
-boundaries -lines -numerical values -symbols -xlines
89. which of the following sections would show all of the internal features of the part most efficiently?
-broken-out section -full section -offset section -removed section revolved section
106.at what scale should you draw objects in model space?
-choose a scale based on the true size of the object -full scale (1:1) -half scale (1:2) -quarter scale(1:4) -no particular scale is necessary
101. which of the following block properties can be changed using a polar stretch action?
-color -layer -shape -size -rotation
85. which of the following actions can you perform using the DCLINEAR command?
-constrain a horizontal distance -constrain a vertical distance -constrain the horizontal distance of an angled surface -place a horizontal geometric constraint -place a vertical geometric constraint
105.which of the following actions can you perform using the BCPARAMETER command?
-convert a dimensional constraint to a constraint parameter -create a perpendicular geometric constraint -create a radius constraint parameter -place a linear constraint parameter -place a parallel geometric constraint
74. what is the correct term for the shaded area in the hole shown below?
-counterbore -countersink -fillet -landing -round -spotface
66. which of following conversions are possible in quickcalc?
-cubic feet to cubic meters -degress Fahrenheit to degrees Celsius -degrees to radians -miles to kiometers -ounces to milligrams
76. which of the following terms describes the dimension 18.75[+&-] .25?
-deviation tolerance -equal bilateral tolerance -limit dimensioning -plus-minus dimensioning -symmetrical tolerance -unequal bilateral tolerance
100. Which of the following actions can be assigned to a point parameter?
-flip -move -rotate -scale -stretch
111.which of the following features of the layer properties manager apply layer property overrides?
-freeze -new vp freeze -new vp thaw -thaw -vp plot style
104.study the property lookup table for a pipline valve. which option would you select from the lookup parameter grip to display the valve in the 45degree position?
-full flow -no flow -normal flow -reduced flow -
91. which of the following options would you chose to create the hatch shown?
-ignore island detection -no island detection -normal island detection -outer island detection -
95. which group of ATTDEF settings is most efficient for an attribute that is not expected to change and that will be used only to tabulate date?
-invisible, constant, lock position -invisible, verify, preset -visible, constant, preset -visible, constant, verify -visible, verify, lock position
116. What is the default insertion base point for an xref file?
-lower-left corner of the geometry -lower-left corner of the layout -model space origin - upper-right drawing limit
69.what is the smallest number of views that can be used to dimension a cylindrical shape?
-one -two -three -four
107. which of the following methods can you use to create a new layout?
-pick new and layout from the application menu -pick the new... button in the page setup manager -pick the new layout button in the navigation bar -pick the plus (+) button to the right of the last layout tab -right-click on a current layout and select New layout
114. how can you change the overall annotative scale of a layout?
-right-click and select an annotation scale from the cascading list -select scale list in the annotation scaling panel of the annotate ribbon tab -use the annotation scale flyout -use the properties palette -use the viewport scale flyout
62.how can you show the control vertex grips on a spline that was created using the fit points method?
-select the spline, right-click, and pick spline and display control vertices -use the splinedit convert to polyline option -select a fit point grip, right-click, and pick remove fit point -select the parameter grip and pick control vertices
83. how can you remove existing breaks in a table?
-select the table, right-click, and select remove all property overrides -move the table breaking grip down to the last row -select the table breaking grip and press [delete] -use the properties palette to set table breaks enabled to no
61.which of the following statements are true about boundaries created using the default options?
-the original objects are deleted when you create the boundary -they are created in exactly the same location as the original objects -they are polyline objects -they have physical properties such as centroids and products of inertia
93. you have a 1"x1" unit block of a window. to use the block to represent a 3' window in a 4' wall, which of the following scale factors would you use?
-x=1, y=1 -x=3, y=4 -x=4, y=30 -x=30, y=4 -x=36, y=4