AD FINAL REVIEW
All of the above.
A clothes care center should ____.
condense mortar to a surface ready for final steel troweling
A float is used in finishing concrete to ______.
central chimney
A primary feature of the Cape Cod home style was its ____.
All of the above.
A type of interior door is ____.
open plan
A(n) ____ makes the rooms appear larger.
All of the above.
Accordion doors ____.
living room
An ideal dining room location would be between the ____ and the kitchen.
1/3
Approximately ____ of the house is devoted to the sleeping area, which includes bedrooms, baths, dressing rooms, and nurseries.
vertical load to be supported
Concrete and masonry basement wall thickness depends on lateral earth pressure and _____.
4 to 6
Concrete slabs are normally placed on a base of compacted sand _____ inches thick.
composed of two side jambs and a head jamb across the top
Door jambs used in residential construction are ____.
output
Equipment such as plotters, inkjet printers, and monitors are called ____ devices.
6
Excavation for residential footings should extend down a minimum of _____ inches into undisturbed earth.
24
Floor trusses are generally spaced ____ inches OC.
22
For practical kitchen design, the length of the work triangle should not exceed ____ feet.
closet
It is necessary for each bedroom to have a ____.
digitizer puck
Menu overlays (tablet menus) are generally used with a ____.
30"
Most water closets require a space at least ____ wide for installation.
Mr. Jones's foundation plan will be 8" longer and wider than Ms. Smith's because a brick veneer house needs a 4" ledge on all four sides.
Ms. Smith and Mr. Jones are each building a house from the same floor plan. Ms. Smith is using a stud wall with siding and Mr. Jones is using brick veneer. Which of the following statements applies to Ms. Smith and Mr. Jones?
general exterior maintenance is usually more difficult and costly
One disadvantage of a two-story house is that _____.
be large, fixed-glass units used with other window types
Picture windows may ____.
All of the above.
Posts used in post foundations are commonly made of _____.
engineer's
Property lines are measured with a(n) ____ scale to the nearest 1/100 foot.
Colonial
The Cape Cod is one of the earliest and best known of the traditional ____ styles.
adjacent
The L-shaped kitchen is located along two ____ walls.
7-5/8 × 7-5/8 × 15-5/8
The actual size of an 8 × 8 × 16 concrete block is _____ inches.
climates where traditional concrete foundation work stops in freezing or rainy weather.
The all-weather wood foundation is particularly suitable in _____.
living room
The color scheme in the dining room is frequently the same as the ____.
metal tiebars
The factor that determines the stability and strength of masonry or concrete basement walls is _____.
support from crosswalls
The factor that determines the stability and strength of masonry or concrete basement walls is _____.
ceramic tile
The preferred material for the floor of a clothes care center is ____.
20' ´ 20' to 25' ´ 25'
The space designed for a two-car garage should range in size from ____.
34-1/2" high, 24" deep, in width increments of 3" multiples
The standard kitchen base cabinet is ____.
3'-0"
To accommodate a wheelchair, doorways should be at least ____ wide.
human-built works
When color is used on a topographical drawing, black is used to represent ____.
Heating is relatively simple and economical because heat naturally rises from the first to the second floor.
Which of the following are advantages of the two-story design?
Atrium, greenhouse, sunroom.
Which of the following are examples of special-purpose rooms?
All of the above.
Which of the following are not considered public accommodations by the ADA?
They can produce striking architectural effects.
Which of the following is a characteristic of clerestory windows?
French
____ doors are panel doors with glass panels.
first floor to the footing
Foundation walls are normally the part of the house that extends from the _____.
waterborne preservative salts
In an all-weather wood foundation, all lumber and plywood that comes in contact with the ground should be pressure treated with _____.
diagonal measurement
In monitors, the ____ should be at least 17" for CADD work.
front-to-back
In the _____ split-level home design, the house looks like a ranch in the front and a two-story structure from the back.
dormers
One-and-one-half-story homes generally have _____ to provide additional light and ventilation.
30
Standard bathroom vanity sizes are 21" deep by ____ high.
symbols library
Standard symbols, such as trees, can be added to a CADD drawing in seconds from the ____.
building on hilly terrain
Stepped footings are frequently necessary when _____.
main
The ____ entry should be centrally located to provide easy access to various parts of the house.
monitor
The ____ is the most common output device.
laser printer
The ____ is very popular when line drawings and text material are integrated and not reproduced in color.
size of the family
The ____ normally determines the number of bedrooms a house will have.
steel
The floor of a garage or carport should be constructed of thick concrete reinforced with ____ or wire mesh.
16
The footing for a residential structure is generally _____ inches wide when the foundation wall is 8 inches thick.
U-shaped
The most popular kitchen design is the ____ kitchen.
All of the above.
Using several layers when making a CADD drawing will allow you to ____.
sump
When groundwater is present, a ____ is generally required to prevent water in the basement.
a basement sump is installed in poorly drained soils
When using an all-weather wood foundation for a basement _____.
All of the above.
Which of the following is a characteristic of condominiums?
Easily adapted to indoor-outdoor living.
Which of the following is a feature of the one-story ranch design?
All of the above.
Which of the following is a feature of the split-level design?
8'-0" h ´ 9'-0" w
Which of the following is not a standard garage door size?
Dashed line.
Which of the following lines should be used to show the hinge positions on a hinged window?
All of the above.
Which of the following represents how CADD can be used to design sleeping and bath facilities?
Hopper windows are more efficient when placed low on the wall because they direct air upward.
Which of the following statements best describes hopper windows?
The drawing produced is a raster image.
Which of the following statements is true of laser printers?
3'-0"
Bedroom doors should be ____ wide to accommodate a wheelchair.
glider windows
Horizontal sliding windows are also called ____.
transmit data from the CPU to the monitor
The function of the video card is to ____.
operator
The monitor provides visual feedback to the ____.
Keyboard
The most common input device is the ____.
batter boards
When color is used on a topographical drawing, black is used to represent ____.
footing
A _____ spreads the weight of a building over a broad area.
All of the above.
A house may have a ____ entry.
protection from the weather
A major consideration in the design of an entryway is ____.
2'-0"
Allow ____ between the back of the chair and the wall for serving in the dining room.
on two walls
An ideal bedroom will have windows ____.
All of the above.
Casement windows have side-hinged sashes that swing out and may be opened or closed by ____.
applying two 1/4"-thick coats of cement-mortar or plaster and then a coat of bituminous waterproofing
Concrete block basement walls should be damp-proofed to prevent groundwater from seeping through the wall. This is done by ______.
provide natural light to an interior part of the house that has no exterior wall space
Courts may be used to ______.