AutoCad Certification Study
What value would you enter to reduce the scale of an object by 25 percent? 25 .25 75 .75
.75
How many possible justification options are available when working with single-line text? 9 12 13 15
15
Which of the following statements is NOT an advantage of using a block? A block reduces file size. A block adds consistency to a drawing. A block increases file size. A block acts like a single object.
A block increases file size.
What is the difference between a gradient fill and a hatch object? A hatch pattern is based on a pattern definition and a gradient fill is based on a color transition between shades of one color or between two colors. You use the Hatch Creation contextual ribbon for hatches and the Gradient Fill contextual ribbon for gradient fills. You can control whether the program creates an Associative or Annotative fill for hatch objects, but not for gradient fills. You can control the Gap Tolerance, Island Detection, and Draw Order for hatch objects, but not for gradient fills.
A hatch pattern is based on a pattern definition and a gradient fill is based on a color transition between two colors.
What must you do in order to copy objects while grip editing? Select the hot grip, press CTRL, and then click to place the copy. Select the hot grip, right-click, and choose Copy. Select the object, right-click, and choose Copy Selection. ANY of these methods can be used.
ANY of these methods can be used.
When editing an array, what happens when you click the Reset Array tool? Any items you replaced, moved, or deleted will be restored to the array. The shape of the path array will return to its original form. The number of items and their location in the array will revert to the way the array was originally created. Any changes you made to the source objects in the array will be lost.
Any items you replaced, moved, or deleted will be restored to the array.
If you change the lineweight to be heavier and then draw lines using the new lineweight, why would those lines not appear heavier, as compared to all the existing lines in your drawing? Lineweights always appear as they should, therefore, you did not actually change the lineweight correctly. By default, the display of lineweights is toggled ON. By default, the display of lineweights is toggled OFF. You can only see changes in lineweight when the drawing is printed or plotted.
By default, the display of lineweights is toggled off
Where can you change the appearance of entire groups of dimensions? Properties palette Dimension Styles Quick Properties palette Dimension Update
Dimension Styles
What is the primary difference between an associative and a non-associative array? You can NOT change the item count or spacing between items when you are creating the array. Each item in the array will exist as an individual object. You can NOT create a non-associative array along a path. You can NOT create a non-associative array in a circular pattern.
Each item will exist as an individual object
The individual endpoints of a polyline segment can be edited with which PEDIT option? Edit vertex Segments Explode Convert
Edit vertex
TRUE or FALSE: Polar tracking MUST be enabled in order to use object snap tracking.
False
TRUE or FALSE: Relative coordinates are coordinate values measured relative to the origin point (the 0,0,0) point.
False
TRUE or FALSE: The Copy Objects to New Layer tool copies selected objects to a new layer that is created on the fly.
False
TRUE or FALSE: The hot grip is always the base point when rotating objects using grips.
False
TRUE or FALSE: When creating a rectangle with fillets, you can choose the Fillet option at any time during the creation of the rectangle.
False
TRUE or FALSE: When editing a polyline, the Close option removes the last arc or line segment that was added to close the polyline.
False
TRUE or FALSE: When first creating a rectangular array, you can change the axis angle of the array.
False
TRUE or FALSE: When scaling objects in reference to another object based on a reference length and a specified new length, you must specify the scale factor exactly.
False
TRUE or FALSE: When scaling text, choosing the scale base point also changes the text insertion point. TRUE FALSE
False
TRUE or FALSE: When the drawing grid is visible on screen, it will also appear in printed output.
False
TRUE or FALSE: When you add a hatch to your drawing, by default, all of the hatches you add at one time are treated as individual hatch objects.
False
TRUE or FALSE: You can NOT use grips to mirror objects.
False
TRUE or FALSE: You can only change the transparency of objects by controlling their transparency Bylayer.
False
TRUE or FALSE: You can only use the Mid Between 2 Points object snap override when those two midpoints are on straight lines. TRUE FALSE
False
When scaling text, choosing the scale base point also changes the text insertion point.
False
Which of the following are commands you can use to edit polylines into curves or arcs? Fit and Smooth Fit and Spline Spline and Smooth Spline and Curve
Fit and Spline
Multiline Text has many unique properties. Which of the following is NOT a Multiline Text property? You can spell check the text. An entire paragraph can exist as a single object. You can change the justification after you place the text. Individual words can be placed on different layers.
Individual words can be placed on different layers
On the Home ribbon, in the Layers panel, what is the purpose of the Match Layer tool? It creates a new layer whose properties match those of a selected layer. It creates a new object whose properties match those of a selected object. It changes the layer of a selected object to match that of a selected destination layer. all of the above
It changes the layer of a selected object to match that of a selected destination layer.
What does the Add Selected tool do? It adds the selected object to the selection set. It removes the selected object from the selection set. It creates a new object in the drawing based on the properties of the selected object. It selects all similar objects based on the properties of the selected object.
It creates a new object in the drawing based on the properties of the selected object.
When joining multiple polylines using the PEDIT command, what does the Fuzz Distance do? It enables you to specify the distance of the smallest gap separating the polylines you are trying to join. It enables you to specify the angle of each join when the gaps in the polyline are closed. It enables you to create a polyline that is fuzzy in appearance. It enables you to specify the distance of the largest gap separating the polylines you are trying to join.
It enables you to specify the distance of the largest gap separating the polylines you are trying to join.
What is the purpose of the New VP Freeze setting? It freezes the current layer in any new viewports you create. It freezes the selected layer in all viewports. It freezes the selected layer in the current viewport. It freezes the selected layer in any new viewports that you create.
It freezes the selected layer in any new viewports that you create.
To place the capital letter "A" in the exact center of the circle shown in the image, you would use an Object Snap of Center and what Text Justification?(The A is centered in a circle)
It is middle justification
To justify multiline text to BOTH the left and right sides of the bounding rectangle, in the Text Editor context menu, Paragraph panel, which justification option would you choose? Center Justify Bottom Top
Justify
What tool would you use to make one set of text match the formatting of another set of text? Duplicate Text Match Text Formatting Copy Formatting Apply Text Style
Match Text Formatting
What tool would you use to make one set of text match the formatting of another set of text?
Match Text Formatting can be used to match the setting of other lines
To make a copy of the furniture in the office labeled "A" so that the copy is mirrored or flipped in the office labeled "B", you would use which command and then specify what?(here is the drawing) | G | |"A" | "B" | | C D| Mirror command and specify the "first point" and "second point" of the "mirror line" from the endpoint of "C" to the endpoint of "D" Mirror command and specify the "first point" and "second point" of the "mirror line" from the midpoint of "C" to the midpoint of "G" Copy command and specify the Flip option with the "first point" and "second point" of the "mirror line" from the endpoint of "G" to the endpoint of "D" Mirror command and specify the "flip point" from the endpoint of "C" to the endpoint of "D"
Mirror command and specify the "first point" and "second point" of the "mirror line" from the midpoint of "C" to the midpoint of "G"
When working in the Layer Properties Manager, which shortcut menu tool would you use to create a new layer frozen in all viewports? New Layer New Layer VP Frozen in All Viewports VP Freeze Layer Any of the above
New Layer VP Frozen in All Viewports
What is the easiest way to edit the contents of either Single-Line Text or Multiline Text? select the Text Edit from the Modify panel in the ribbon right-click any text object double-click any text object using the left mouse button use the Properties palette
Not the text edit command.. You would double click any text
Which of the following is used to specify the distance or location of copied objects away from existing objects? Object Snap Tracking Basepoint From Offset from Basepoint Offset Copy From Basepoint
Object snap tracking
What method would you use to place an object precisely, based on two different dimensions, rather than first having to draw construction geometry? Object Snap Tracking from Two Points with Polar Angles Object Snap Tracking from One Point Orthogonally Object Snap Tracking with a Temporary Track Point Object Snap Overrides with Mid Between 2 Points
Object snap tracking with a temporary track point
In addition to the balloon notification that appears in the lower-right corner of the screen to let you know if everything plotted correctly, how else can you view information about completed plot or publish jobs? Clicking the link in the balloon notification is the ONLY method available. In the Options dialog, on the Display tab, click View Plot or Publish Details. In the Options dialog, on the Plot and Publish tab, click View Plot or Publish Details. On the Output ribbon, in the Plot panel, click View Details.
On the Output ribbon, in the Plot panel, click View Details.
What command allows you to convert existing lines into polylines? Convert Pline Pedit Explode
Pedit
To continue working on a drawing while the program plots, in the Plot dialog, select the _________________ option. Plot and draw Plot in background Deferred plotting You can NOT continue working while the program is plotting.
Plot in background
Which of the following is NOT a method for creating selection sets? Fence Last Box Polygon
Polygon
What method is best to draw an arc in a clockwise direction? You can use ANY method, since clockwise is the default direction. Use the start, center, end method. Press and hold the CTRL key while creating the arc. You can NOT draw arcs in a clockwise direction.
Press and hold Ctrl key while creating the arc
You can scale ANY object or group of objects of unknown size or scale to a precise length or scale by using which option? Reference Scale to Length Lengthen Fit to Scale
Reference
How many possible justification options are available when working with single-line text?
Single line has 15 justifications Multiline has 9 justifications
When using grips to modify lines, which grip option will change both the length of the line and its orientation? Stretch Lengthen Angle Additional Angle
Stretch
If you set the Dim Layer Override to anything other than Use Current, how are the dimensions affected? The dimensions are placed on the current layer. The color of the dimensions is set to that of the current layer. The dimensions are annotative. The dimensions are created on the layer you specify, regardless of the current layer.
The dimensions are created on the layer you specify, regardless of the current layer.
When you use the Justify tool to change the text justification, what happens? The text moves to reflect the new justification point. The justification point moves to the new location, but the text does NOT change. Both the text AND the justification point update. Additional grips are added to the text.
The justification point moves to the new location, but the text does NOT change
When you use the Justify tool to change the text justification, what happens?
The justification point moves to the new location, but the text does NOT change.
When using the Fillet command, what is the result if you select two parallel lines? The program displays an error message because you can NOT add a fillet between two parallel lines. The program adds an arc based on the current fillet radius The program immediately adds a tangent arc connecting the two lines. The program adds a straight line at 90 degrees connecting the two lines.
The program immediately adds a tangent arc connecting the two lines.
When scaling a hatch pattern, specifying a value less than one will have what result? The pattern will use the same scale as originally defined in the hatch pattern. The size of the pattern will be reduced from its original definition. The size of the pattern will be enlarged from its original definition. There will be no change in the size of the pattern from its original definition.
The size if the pattern will be reduced from its original definition
RUE or FALSE: When you preview plotted output, the preview is based on the current plot configuration, as defined in the settings in the Page Setup or Plot dialog.
True
TRUE or FALSE: Absolute coordinates are coordinate values measured relative to the origin point (the 0,0,0) point.
True
TRUE or FALSE: After creating a rectangle using the rotation option, the next time you use the command, the program will use the same rotation angle unless you explicitly change it.
True
TRUE or FALSE: Grips enable you to modify objects without first selecting a modify command.
True
TRUE or FALSE: If you reset an array, any items you removed are restored to the array.
True
TRUE or FALSE: If you retain the boundary objects when adding a hatch, a new object is added to the drawing on the current layer.
True
TRUE or FALSE: The Change to Current Layer tool changes one or more selected objects to the current layer.
True
TRUE or FALSE: The VP Thaw Layer in All Viewports thaws the layers you select in the Layer Properties Manager palette in all viewports.
True
TRUE or FALSE: The primary benefit of using grips is that you can modify any of the geometry in a drawing without ever having to actually start a modify command.
True
TRUE or FALSE: To draw a polyline arc, you must first start the PLINE command and then choose the Arc option.
True
TRUE or FALSE: When creating a circle, the default method is to specify the center point of the circle and the radius of the circle. TRUE FALSE
True
TRUE or FALSE: When creating a circumscribed polygon, the polygon is created around an imaginary circle so that the midpoint of each side of the polygon is tangent to the circle. TRUE FALSE
True
TRUE or FALSE: When creating a polyline, you can use various options in combination to create interesting and useful shapes, such as arrows.
True
TRUE or FALSE: When creating a rectangle using the Width option, you must choose the Width option before you specify a corner of the rectangle.
True
TRUE or FALSE: When creating a rectangle with chamfers, you must specify the first and second chamfer distances; there is no angle option.
True
TRUE or FALSE: When creating a rectangular array, you must specify the number of rows and columns and the distance between the rows and columns.
True
TRUE or FALSE: When objects have their color set to ByLayer, if you change the color of the layer, the color of the objects will automatically change.
True
TRUE or FALSE: When setting objects to ByLayer, any properties not selected in the SetByLayer Settings dialog will remain as explicitly set to the object, while those that are selected in the dialog will be changed back to ByLayer.
True
TRUE or FALSE: When the OFFSETGAPTYPE is set to a value of 1, when you offset a polyline, the program fillets the polyline segments at their intersections, with the radius of each arc segment equal to the offset distance.
True
TRUE or FALSE: When the Quick Measure tool is active, the cursor displays all nearby measurements, both inside and outside the nearest geometry.
True
TRUE or FALSE: When you add a hatch or gradient fill using the Tool Palette, the properties of the hatch or gradient, such as its scale, rotation angle, and even the layer the hatch is drawn on, are the same as those defined in the tool palette itself.
True
TRUE or FALSE: When you change the style definition of an existing text style, ALL existing text objects created using that text style update throughout the entire drawing. TRUE FALSE
True
TRUE or FALSE: You can control various aspects of the Quick Properties palette, such as what information appears in the palette and where the palette appears in relation to the cursor.
True
TRUE or FALSE: You can create a polygon by specifying the length of one of its sides. TRUE FALSE
True
TRUE or FALSE: You can select more than one hot grip.
True
TRUE or FALSE: You can use a tool in the Layer Properties Manager palette to freeze selected layers in ALL viewports.
True
TRUE or FALSE: You can use a tool in the Layer Properties Manager palette to freeze selected layers in all viewports, EXCEPT for the current viewport.
True
When you change the style definition of an existing text style, ALL existing text objects created using that text style update throughout the entire drawing.
True
When working with linetypes, if you do not see the linetype you would like to use in the Linetype drop-down, what can you do? Use the Linetype Manager to load additional linetypes into the drawing and then choose from among those. Change the linetype to Bylayer. Use the linetype assigned to the layer on which is was created. You must use ONLY the linetypes that are currently available in the drawing.
Use the Linetype manager to load additional linetypes into the drawing and then choose from among those
What is the easiest method you can use to trim one object back to another if the two do not intersect? Extend the objects until they intersect, and then use the TRIM command. Draw a temporary object to use as the trim boundary. Use the TRIM command with the Edge option set to Extend. Use the EXTEND command with the Edge option set to No extend.
Use the TRIM command with the Edge option set to Extend.
Text Style controls the appearance of text. Which of the following can NOT be controlled with a Text Style?
You can control the height of the text, the font name, and the oblique angle. You cannot edit the layer because all text goes in one special layer I believe.
Multiline Text has many unique properties. Which of the following is NOT a Multiline Text property?
You can do all of this: You can spell check the text. An entire paragraph can exist as a single object. You can change the justification after you place the text. You cannot have: Individual words can be placed on different layers.
When an AutoCAD command is active, the right-click menu will ALWAYS show which of the following? the Help menu Zoom and Pan real-time the Undo command option the Options dialog
Zoom and Pan real-time
The AutoCAD coordinate system is based on ALL of the following, EXCEPT: an absolute location in space. locating a point based on an X, Y and Z value. a relative coordinate in space. a Classic AutoCAD coordinate system or Workspace.
a Classic AutoCAD coordinate system or Workspace.
When plotting a paper space layout, what should the plot scale be set to? the scale at which the model was created the scale of the largest model space viewport to fit the paper space layout to the actual sheet of paper a scale of 1-to-1
a scale of 1-to-1
How do you open the Properties palette? On the Home ribbon, in the Properties panel, click the dialog box launcher. On the View ribbon, in the Palettes panel, click the Properties button. Press the CTRL+1 keyboard combination. all of the above
all of the above
How is the Quick Properties palette enabled? Add the Quick Properties button to the Status bar, then click the icon to toggle the Quick Properties palette ON. Select an object while the Quick Properties palette is toggled ON. Double-click an object that can be controlled using the Quick Properties palette.. all of the above
all of the above
What methods can you use to change the draw order for hatch patterns? While creating the hatch object, on the Hatch Creation contextual ribbon, expand the Options panel, expand the Send Behind Boundary drop-down, and choose the desired draw order. Select an existing hatch object; then, on the Hatch Editor contextual ribbon, expand the Options panel, expand the Leave Unchanged drop-down, and choose the desired draw order. On the Home ribbon, expand the Modify panel and use the Draw Order tool. all of the above
all of the above
When you apply a hatch pattern, you can select the hatch pattern you want to apply. You can use which of the following: one of the predefined hatch patterns that comes with the program a user-defined hatch pattern a custom hatch pattern that you created or acquired from a third-party all of the above
all of the above
Which of the following can you use to modify an associative polar array? grips tools in the contextual ribbon fields in the Properties palette all of the above
all of the above
Why is it typically more productive to use the tools in the Hatch Creation contextual ribbon rather than the Hatch and Gradient dialog box? The dialog box can block your view of the drawing. Using the Hatch and Gradient dialog actually takes more steps than using the contextual ribbon. When using the dialog box, you do NOT immediately see the results of any of the settings you configure. all of the above
all of the above
The Quick Select and Object Selection Filter allow you to select objects based on which of the following? creation preference entity handles viewport and layer display any reportable property of any object
any reportable property of any object
When creating a rectangle based on its area, what values must you specify? area, length, AND width area AND length OR width area, length OR width, AND direction ANY of the above
area AND length OR width
By default, AutoCAD dimensions exist as a single object and are also what? associative on their own layer blocks object snapped to geometry
associative
After you create a 2-point or a 3-point circle, if you then select the resulting circle, grips are displayed where? at each end of their diameter at their center points and quadrant points at their center points and radii at the points you selected during their creation
at their center points and quadrant points
By default, hatch objects that you add to your drawing are associative hatch objects, which means that the hatch pattern is directly related to, or associative with, the boundary objects used to create the hatch. If you subsequently change the boundary objects, the hatch will: need to be manually updated to follow those changes. automatically update to follow those changes. not change; you can NOT change boundary objects of hatches. none of the above
automatically update to follow those changes
Which of the following methods is NOT used to create a polygon? Inscribed by Area Circumscribed by Edge
by area
When you edit the source objects in an associative array, which of the following can NOT be done? add items to an array remove items from an array modify the objects in the array change the spacing between items in the array
change the spacing between items in the array
Which of the following is NOT a grip option? Move Mirror Copy Scale
copy
The Fillet command can be used to create a radius or round between any two non-parallel line segments. You can also use the Fillet command to do ALL of the following, EXCEPT: extend any two non-parallel lines to the point where they meet in space. create tangent arc segments between circles or arcs. extend any non-intersecting line segments. trim any overlapping or intersecting line segments.
create a tangent arc between circles or arcs
The Chamfer command can be used to create a line segment between any two non-parallel line segments, as well as other line functions. Which of the following can NOT be done using the Chamfer command? extend any two non-parallel lines to the point where they meet in space create tangent line segments between circles or arcs extend any non-intersecting line segments trim any overlapping or intersecting line segments
create tangent line segments between circles or arcs
What is the easiest way to edit the contents of either Single-Line Text or Multiline Text? select Text Edit from the Modify panel in the ribbon right-click any text object double-click any text object using the left mouse button use the Properties palette
double-click any text object using the left mouse buttom
When using the Move command, once objects have been selected, what are you prompted for? for the base point or [Displacement]: to pick a location for the Object Snap location to Specify the second point or <use first point as displacement>:
for the base point or displacement
How can you remove objects from any selection set? use the Oops command use the Undo command hold the SHIFT key and select the object again use the Restore command
holding the SHIFT key and the object again
To create an object with the correct color, linetype and lineweight, it is important to first set these where? in the Layer Properties Manager in the Object Creation palette in the Control panel in the ribbon in the Properties panel in the ribbon
in the properties panel in the ribbon
Text Style controls the appearance of text. Which of the following can NOT be controlled with a Text Style? Height Layer Oblique Angle Font name
layer
You can modify the properties of an existing object using the tools in ANY of the following locations, EXCEPT which of the following? Layer Properties Manager palette Properties palette Quick Properties palette Properties panel in the ribbon
layer properties manager palette
When creating a rectangle based on its dimensions, what values must you specify? length AND width area AND length OR width length, width, AND opposite corner ANY of the above
length, width, AND opposite corner
If Linetype choices do NOT appear in the drawing, you must do what to see them? load Linetypes toggle the Linetype button ON in the Status bar turn Linetype Visibility ON set the Linetype to ByLayer
load Linetypes
When you mirror objects in 3D, the objects must be which of the following? all drawn on the current XY-plane 3D objects mirrored about a mirroring plane specified anywhere in 3D space mirrored about a mirroring plane specified by three points
mirrored about a mirroring plane specified anywhere in 3D space
Which of the following is used to specify the distance or location of copied objects away from existing objects? Object Snap Tracking using Basepoint From using Offset from Basepoint using Offset copy From Basepoint
object snap tracking
The Offset command allows you to make copies that are either: parallel or perpendicular. parallel or concentric. parallel or tangent. concentric or tangent.
parallel or concentric
How do you alternate between the Trim command and the Extend command? use the shortcut menu click with the left mouse button when done right-click or press ENTER on the keyboard press and hold the SHIFT key
press and hold the Shift key
Grip arguments are options to enhance the editing features of grips. Which of the following is NOT a valid grip argument? Base point Copy Undo Redo
redo
Which of the following is NOT a method for making an open object either longer or shorter using the Lengthen command? Total Percent Delta Reference
reference
You can use the ROTATE command in conjunction with the _______________________ option to rotate objects in reference to another object, or from one angle to another, without having to actually know the angle. reference point reference angle rotation base point rotation angle
reference angle
Once you select the base point for objects to be copied, how do you specify the location and confirm the total number of copies? choose the Offset options from the cursor menu and add the quantity click with the left mouse button when done type in the quantity when prompted right-click and select Enter or press ENTER on the keyboard
right-click and select enter or press Enter on the keyboard
When grip editing, if you right-click and drag a hover grip, you can do ALL of the following, EXCEPT: move the selected object. copy the selected object. paste the selected geometry as a block. rotate the selected object.
rotate the selected object
Which of the following is the easiest way to edit or modify an existing Hatch? select the hatch to display the Hatch Editor contextual ribbon open the Hatch Edit dialog box use the Properties palette use the Quick Properties palette
select the hatch to display the Hatch Editor contextual ribbon
What must you do first, in order to change the path of a path array? select an item in the array select the path use the Path Array Edit command open the Properties palette
select the path
When using the Chamfer command, what method is used to extend two lines to the point at which they meet WITHOUT adding an additional line segment at an angle? first set the Chamfer Distances to 0 first set the Chamfer Angle to 0 simply press the SHIFT key while selecting the two lines set the Trim mode to No Trim
simply press the SHIFT key while selecting the two lines
Which of the following is NOT a grip type? snap selected unselected hover
snap
When repeating the Circle command, what is the default method for creating the next circle? specify the center, then the radius use the last method for creating a circle automatically locate it in the same location with the same radius as the last circle created pick points and then type the radius or diameter value
specify the center, then the radius
Which circle drawing method creates a circle with a specified radius that is tangent to two existing objects? Circle-Radius 2-Point or 3-Point Tangent, Tangent, Tangent Tangent, Tangent, Radius
tangent, tangent, radius
What do Plot Style Tables control? which objects actually print or plot the actual print display, color, and resolution the actual color and font used in AutoCAD Tables which printers and plotters are available
the actual print display, color, and resolution
When creating a polar array, you must specify which of the following before you can complete the array? the objects to be arrayed, the center point of the array, and the axis of rotation the center point of the array, the number of items, and whether the array will be associative or not the center point of the array, the number of items or angle between items, and the angle to fill the objects to be arrayed, the number of items, and the angle between items
the center point of the array, the number of items or angle between items, and the angle to fill
By default, what is the Hatch origin set to? the origin of the current coordinate system the lower-left corner of the object boundary to be hatched the origin of the World coordinate system absolute 0,0,0
the origin of the current coordinate system
How does an Object Snap Track allow you to locate a point? based on existing geometry locations from an Extension away from an existing object the point is a specific distance away from existing geometry the point is a specific preset distance and angle away from existing objects
the point is a specific distance away from existing geometry
During the initial steps of setting up a print or plot, choosing a printer and paper size is important because it determines which of the following? how much ink will be used how long it will take to print the file the scale the model to be printed at in order to fit on the paper all of the above
the scale the model to be printed at in order to fit on the paper
When you create an associative rectangular array, you can NOT change which of the following? the distance between rows and columns the number of items in the array the objects in the array the type of array
the type of array
While the DIM command is active, what is the easiest way to align dimensions to improve their readability? cancel the DIM command and then use the DIMSPACE command use the Align option use grips change the dimension style
use the Align option
Dynamic Input gives you two abilities. One is to specify coordinate locations by typing Cartesian coordinates. What is the other? right-click to choose the command option use the DOWN ARROW on your keyboard to choose the command option either type the option or the capital letter of the option, and then press ENTER specify the coordinate locations by picking the location using the mouse
use the DOWN ARROW on your keyboard to choose the command option
What is the easiest method you could use to insert a block that exists in another drawing into the current drawing? use the INSERT command use the BINSERT command use the DWGINSERT command none of the above
use the INSERT command
When using the Fillet command, you do which of the following to select all the edges of a face at once? use the Chain option use the Loop option use the Radius option select each edge individually
use the Loop option
Other than horizontal, how else can linear dimensions be placed? angular circular vertical perpendicular
vertical
While grip editing, when is the Reference option available? when using Scale or Rotate when using Rotate when using Copy There is no Reference option when grip editing.
when using Scale or Rotate
In order to create a Hatch object in a drawing, it MUST be what? on its own layer associative annotative within a closed boundary
within a closed boundary