Builders Exam
An employer who fails to comply with the provisions of Act 317, Section 611 is guilty of a misdemeanor and may be fined not more than ________, or imprisoned for not more than _________, or both. Each day's failure to comply is a separate offense.
$1,000 / 6 months
An employer who fails to comply with the provisions of Act 317, Section 611, is guilty of a misdemeanor and may be fined not more than ____ or imprisoned for not more than _____ or both. Each days failure to comply is a separate offense.
$1,000/6 months
According to fair labor practices, if John Doe is paid $18.00/hr and he worked 51 hours, his total earning are ___?
$1,017
A person who violates Act 299 is subject to a civil fine not to exceed ___.
$10,000
A person who violates Act 299 is subject to a civil fine not to exceed ___?
$10,000
Financing for a new home requires a 20% down payment. What would be the amount financed if the cost of the home is $164,062?
$131,249.60 so rounded $131,250
The Department shall charge a _________ late fee for failing to renew a license on time.
$20
The Home Solicitation Sales Act 227 requires a written contract if the dollar amount is more than _______.
$25
All of the builder's suppliers offer terms of 2%/10, net 30, 1.5% per month penalty over 30. The builder has one statement in the amount of $15,000 dated January 1, one statement for $6,000 dated February 1, and one statement for $5,000 dated March 1. What is the total amount the builder must pay to settle these statements on March 5?
$26,440
As of January 1st 2017, the minimum hourly wage of an employee shall be ____ per hour provided that gratuities are received that are equal to or exceed the minimum hourly wage as established.
$3.38
As of January 1st, 2017 the minimum hourly wage of an employee shall be ________ per hour provided that gratuities are received that are equal to or exceed the minimum hourly wage as established.
$3.38
Indicate the uniformly distributed live load for sleeping rooms
30 pounds
Indicate the uniformly distributed live load for sleeping rooms?
30 pounds
Lead PRE requires contractors to retain lead related project records for ___?
30 years
The preferred angle of the stringer is ___?
30-35 degrees
The handgrip portion of a handrail shall have a circular cross section of _______ inches minimum to ______ inches maximum.
1 1/4 inches to 2 inches
The minimum requirement for a door leading from the attached garage into the dwelling unit is ____?
1 3/8 inch solid core
Standard thickness for interior doors are ___?
1 3/8"
Around a pool, the maximum size of a chain link fence mesh opening by itself shall not exceed ___________.
1 and 1/4 inches
Trees usually will not tolerate more than _________ of additional fill around the root system.
1 foot
The minimum air space between the face brick & the sheathing is?
1 inch
The installation of bevel wood siding requires a specific number of face-nailed nails per stud. Select the correct answer from the choices below for nailing 6 inch wide bevel wood siding.
1 nail per stud
After a claim of lien has been recorded, what is the maximum length of time in which proceeding for the enforcement of the lien must be started?
1 year
Enforce a lien in court within?
1 year
The ends of each joist shall have not less than ______ of bearing on wood or metal.
1.5 inches
File a complaint against a builder within?
1.5 years
If 3/4 inch strip flooring is used, the 1st piece is located in what location to the wall?
1/2"
If 3/4 inch strip flooring is used, the 1st piece is located in what location to the wall?
1/2" away from the wall
The most common "scale" used for residential blue print drawings is ____ inch.
1/4
According to code, the minimum permitted spacing between adjacent wood shingles is
1/4 inch to 3/8 inch
Spacing of trusses should be within what maximum tolerance specified by the plan?
1/4 inch.
Coarse aggregate is over ____________ in diameter.
1/4 inches
According to code, the minimum permitted spacing between adjacent wood shingles is
1/4 inches to 3/8 inches
Residential plan views are generally drawn _________ scale.
1/4 scale
According to code, the minimum permitted spacing between adjacent wood shingles is ___?
1/4 to 3/8 inches
Crossway slopes of concrete walks and driveways should be at least _______ inch per foot.
1/4"
The depth of notches in solid lumber joists shall not exceed _________ of the depth member.
1/6th
Plywood roof deck sheathing should be spaced from each other sheet by ___?
1/8"
A building permit shall be granted in whole or in part or denied within ____.
10 days
A building permit shall be granted in whole or in part or denied within?
10 days
A licensed builder shall report major changes of his license within?
10 days
Building permit shall be granted in whole or in part or denied within?
10 days
According to OSHA, what is the minimum distance between power lines and a portable non-metallic ladder?
10 feet
As the safety officer for a project, you are responsible for making sure all MIOSHA rules are complied with. A tubular steel scaffold must have a guardrail if it is above what minimum height?
10 feet
Indicate the uniformly distributed live load for attics without storage
10 pounds per square inch
Indicate the uniformly distributed live load for attics without storage.
10 pounds per square inch
Six pieces of lumber measure 1" x 8" x 14' What is the total board footage?
56
Refer to the set of plans provided. What is the live load design of the stairway?
100 pounds per square foot
Draft stops shall be installed so that the area of any concealed space does not exceed ____?
1000 square feet
Basic wind speeds for 50 year mean recurrence interval for Michigan is ___?
115 miles per hour
Anchor bolts at the corner of foundations shall be located within ______ inches of the corner.
12 inches
As related to foundation drainage, gravel drains must extend upward from the bottom of a footing a minimum of _______ inches.
12 inches
MIOSHA Part 12. Planking should extend beyond all supports at least _?
12 inches
Refer to the set of plans provided. How thick are the piers on each side of the garage door?
12 inches
Scaffold planking should overlap other planks by ___?
12 inches
When nailing 1/2" O.S.B. board to a floor joist system, what is the maximum spacing of nails along the joists?
12 inches
What is the size of a standard shingle?
12 inches X 36 inches
According to code, gravel foundation systems shall extend a minimum of ____.
12 inches beyond the outside edge of the footing
What is the size of a standard shingle?
12 inches by 36 inches
Ceiling joists are 16" on center and no adhesive is used. If screws are used on drywall the spacing is
12"
MIOSHA Part 12. Planking should extend beyond all supports at least
12"
Refer to the set of plans provided. What is the total number of risers from the first story to the second story?
14
A new construction home requires 20,000 square feet of common brick. How many bricks will be required?
140000
According to ADA requirements, after July 26, 1994, the ADA applied to employers with ____ or more employees.
15
According to the A.D.A. requirements, after July 26, 1994, the A.D.A. applied to employers with ______ or more employees.
15
A licensed builder shall reply to a complaint within ____.
15 days
After filing a lien at the county Register of Deeds, subcontractors, suppliers, and laborers must notify the homeowner either in person or certified mail within ______ days.
15 days
Department must acknowledge receipt of complaint to complainant within?
15 days
The Department shall acknowledge receipt of a complaint to the complainant within ___.
15 days
The department shall acknowledge receipt of a complaint to the complainant within?
15 days
The minimum crawl space ventilation required is 1 square foot per each ______ square feet of under floor space without a vapor barrier.
150
The minimum crawl space ventilation required is 1 square foot per each ______ square feet of under floor space without a vapor barrier.
150 square feet
Refer to the set of plans provided. What is the size of the garage overhead door?
16 feet wide by 7 feet high
If the top plates in a bearing wall are notched greater than 50%, a _______ gage mending plate must be used for the splice.
16 gage
If the top plates in a bearing wall are notched greater than 50%, a _______ gage mending plate must be used for the splice.
16 gauge
Refer to the set of plans provided. What is the sill height of the master bedroom above the finished floor?
16.5"
A complaint filed against a builder must be within ____ days of job completion.
18 months
Open valleys may be lined with 2 plys of mineral surfaced rolled roofing. The bottom layer shall be ______ inches wide, the top layer a minimum of ______ inches wide.
18, 36
Once a permit is issued you have _________ days to begin work or the permit is void.
180 days
In reference to block foundation waterproofing the parging coat would be the ______ layer of cement plaster.
1st layer
The Board shall meet no less than _____ times per year.
2
Refer to the set of plans provided. What size lumber is used for the gable end brace?
2 X 4
Chimneys shall extend at least _________ higher than any portion of a building within 10 feet.
2 feet
Excavated soil and rock must be stored at least ________ from the edge of an excavation.
2 feet
On a 4:12 roof, underlayment shall overlap each other by a minimum of?
2 inches
What material is most suitable for repairing cracks on exterior block basement walls?
2 part epoxy
An unlicensed residential contractor who violates Act 299 a second time is punishable by a fine of not more than $25,000 or imprisoned for not more than ___ or both.
2 years
Around a pool, the maximum size of a chain link fence mesh opening by itself shall not exceed ___________.
2.25 inches
In masonry veneer walls, there shall be at least one metal face brick tie for each _____ square foot of block wall area.
2.67 feet
Subcontractors & suppliers send notice of furnishing within ____ after furnishing first labor or materials
20 days
Subcontractors must submit notice of furnishing within?
20 days
A bedroom emergency escape window shall have a clear net opening width of ____?
20 inches
Refer to the set of plans provided. What is the minimum width of the window in bedroom #3?
20 inches
If a steel door is used for leading from the attached garage into the dwelling unit, the minimum fire rating would
20 minutes
Ground snow loads for Michigan range from ______ in the southeast corner to _____ at the northern tip.
20 pounds per square foot to 100 pounds per square foot
Concrete foundations without brick ledges for masonry veneer must extend a minimum of _____ inches above finished grade.
6
Maximum spacing of foundation anchor bolts is ____?
6 feet
Most exterior doors are _________ high.
6 feet 8 inches
Concrete foundations without brick ledges for masonry veneer must extend a minimum of _____ inches above finished grade.
6 inches
MIOSHA Part 12. Planking should extend beyond all supports at least
6 inches
MIOSHA Part 12. Planking should extend beyond all supports at least ___?
6 inches
Non-treated wood siding must be a minimum of ______ inches from the ground.
6 inches
When nailing 1/2" O.S.B. board to a floor joist system, what is the maximum spacing of nails on the edge?
6 inches
The Board is made up of ___?
6 licensed members and 3 from the general public
Fasteners for plywood soffit is to be spaced approximately how many inches apart?
6"
In reference to scaffolds, planking should overlap a bearing point
6"
Interior doors have a standard height of?
6' 8"
For roof ventilation, if there is a vapor barrier the net free cross ventilation is reduced to 1 square foot to ________.
300 square feet
Face brick wall ties in block masonry walls shall not exceed _____ inches in the horizontal distance.
32 inches
Maximum spacing of weep holes is _________ inches.
33 inches
The top of guard rails shall not be less than ____ in height.
34 inches
According to code, what is the minimum height permitted for finished guardrails (NOT used as handrails) in residential one- and two-family dwellings?
36 inches
An emergency escape window well shall have a minimum horizontal projection and width of ___?
36 inches
The required stairway shall not be less than _______ inches in clear width
36 inches
The required exit door shall not be less than _______ width and _______ in height.
36 inches in width and 80 inches
The minimum width of a hallway shall be not less than ____?
36 inches wide
According to Part 22 of the Safety Standards, what is the minimum permissible height for a saw-horse type barricade that will be used to direct traffic?
36" (not verified)
After receipt of the Administrative Law Hearings examiners report, the Board shall assess penalties within _?
60 days
After receipt of the Administrative Law Hearings examiners report, the Board shall assess penalties within ___.
60 days
After receipt of the Administrative Law Hearings examiners report, the Board shall assess penalties within ___?
60 days
Director may impose limitation if board fails to approve/disapprove limitation within?
60 days
The director may impose a limitation on a license if the board fails to approve nor disapproves the imposition of a limitation within ___.
60 days
Concrete foundations with brick ledges for masonry veneer must extend a minimum of _____ inches above finished grade.
4
How many fasteners are required for each individual asphalt strip shingle?
4
The maximum air space between the face brick & the sheathing is?
4 1/2 inches
According to the Michigan Residential Code, what is the minimum height for fences surrounding a pool?
4 feet
Ladders and steps are used to enter trenches more than ___ deep?
4 feet
A residential blue print drawn to 1/4" scale shows a window which measures 1 inch wide by 3/4 inches tall. What will be the actual window size?
4 feet x 3 feet
Openings in the fence barrier around a pool shall not allow passage of a ________ diameter sphere.
4 inch diameter sphere
Concrete foundations with brick ledges for masonry veneer must extend a minimum of _____ inches above finished grade.
4 inches
When roofing, what is the proper way to fasten 3-in-1 asphalt strip shingles? 2 nails along the top of the shingle. 3 nails, one at each end and one in the center. 4 nails, one at each end and one in each cutout. 4 nails equally spaced along the nailing strip.
4 nails, one at each end and one in each cutout
The minimum openable area to the outdoors shall be ______ of the floor area being ventilated.
4%
Face brick metal wall ties attached to wood framing shall be not less than number ________ U.S. gage by 7/8 inch corrugated.
22 gauge
The roughed frame opening for the attic access shall not be less than ___________ .
22 inches by 30 inches
Face brick wall ties in block masonry walls shall not exceed _____ inches in the vertical distance.
24 inches
Refer to the set of plans provided. What is the access size of the crawl space?
24 inches by 18 inches
Not more than ____% of the gross monthly income should be spent for housing including mortgage, insurance, utilities, and taxes.
25%
Joists framing from opposite sides over a bearing support shall lap a minimum of _____ inches.
3
The ends of each joist shall have not less than _____ inches of bearing on masonry or concrete
3
The maximum air space between the face brick & the sheathing is ___?
4.5 inches
Studs in non-bearing partitions may be notched to a depth not to exceed ______ of a single stud width.
40%
All exterior footings and foundation systems shall extend ______ below actual grade.
42 inches
If the depth of water contained is over __________, then it is considered a swimming/wading pool.
42 inches
What is the normal depth for a footing below grade?
42 inches
Window wells with a vertical depth greater than ______ inches are required to have a ladder or steps.
44 inches
Minors cannot exceed ____ hours of combined school and work per week?
48
A pool shall be provided by a barrier at least _______ inches high.
48 inches
A 3,000 square foot roof requires 10 square feet of ventilation. The ventilation will be divided equally between ridge and soffit vent. How many square feet of soffit vent will need to be purchased?
5
The net clear opening of a grade floor bedroom emergency escape window can be no less than ______.
5 square feet
Crossway slopes of concrete walks and driveways should not be more than.
5%
If the bedroom emergency escape window was located on the second story, the clear net opening required is ____?
5.7 square feet
Refer to the set of plans provided. The pitch of the roof on the front porch shed is __?
5/12
Door heads and jambs are generally made of ________ thick wood stock.
5/4 inch
A drilled hole cannot be closer than ____ to the edge of a stud in an exterior wall or partition
5/8 inches
The amount of overlap for a ladder up to and including 32 feet is?
3 feet
The ends of each joist shall have not less than _____ inches of bearing on masonry or concrete.
3 inches
A private employer having ___ or more employees at a time, or who employs one or more workers for ___ or more hours per week for ____ or more weeks, is subject to the workers comp act.
3, 35, 13
To make the insertion of ceiling tiles easier, what is the recommended minimum spacing between the bottom of framing members and the top edge of the drop ceiling grid?
3-4 inches
Wood shakes shall not be installed on slopes less than __________.
3/12
Wood shingles shall not be installed on slopes less than ___________.
3/12
Weep holes shall not be less than _________ inch in diameter.
3/16
Weep holes shall not be less than _________ inch in diameter.
3/16 inches
Weep holes shall not be less than _________ inch in diameter.
3/16th
Door casing is set back off the face of the jamb approximately ___?
3/16th of an inch
If stairway nosing is required, then the minimum depth is ______ inches and the maximum depth is ______ inches.
3/4 inches and the maximum depth is 1 1/4 inches
A person who has received a limitation may petition the department within _____ days for a review of the decision.
30
A Building Board of Appeals shall render its decision not more than _______ days after submission of the appeal.
30 days
A building board of appeals shall render its decision not more than ____ days after submission of the appeal?
30 days
A licensed builder shall report minor changes of his license within ___?
30 days
A licensed builder shall report minor changes of his license within?
30 days
A person who has received a limitation may petition the department within ___ days for a review of the decision.
30 days
A person who has received a limitation may petition the department within _____ days for a review of the decision.
30 days
Days to petition department if license is having limitation put on it?
30 days
Laborers send Notice of Furnishing within ________ after wages are due.
30 days
Report minor license changes within?
30 days
The investigative unit shall report the status of a complaint to the director within ___?
30 days
You have acted as a subcontractor on a new home and have provided rough framing. From the last day you provide labor on the home, how long do you have to register a claim of lien?
30 days
The minimum unobstructed head room above the roughed frame access opening for the attic is ___________.
30 inches
Combining money from several jobs to finish an existing job is an example of
Commingling
A homeowner hires you to build an addition on his home. What must be done after completing a sales contract in order for the contract to be valid? All signatures must be notarized to validate the contract. The sales contract must be delivered to the person holding the builder's license for the company. Deliver to the customer fully executed copies of the agreement. A 3 day withdrawal period must elapse before the contract is binding.
Deliver to the customer fully executed copies of the agreement.
Who approves the context and makeup of the builders test?
Department & Board
Who approves the context and makeup of the builders test?
Department and Board
A formal complaint is filed against a builder for financial mismanagement. Select the organization responsible for investigating the complaint.
Department of Licensing & Regulatory Affairs
Books and records of a builder are open to inspection by ____.
Department of Licensing & Regulatory Affairs
Indicates types and location of siding, shingles, windows, and doors.
Elevation Plan
Another name for the I.R.S. W-4 form is _____________________.
Employee exemption form
Another name for the I.R.S. W-4 form is _____________________.
Employees withholding allowance certificate
The director of the construction code commission sole statutory authority is to ___?
Enforce building codes
In reference to partition support floor joists that are spaced to allow for plumbing, solid blocking should be installed ____?
Every 4 feet
What word best describes sheet metal used to protect the house from water leakage?
Flashing
What is the best tool to use for removing a broken asphalt strip shingle?
Flat pry bar
What tool would be used to strip asphalt shingles?
Flat shovel
What type of joint is shown by figure #6 on the side of the masonry cross section?
Flush or Rough Cut
The Department is investigating a complaint of violation. The contractor is called in for an informal conference to discuss the complaint against the contractor. At the conclusion of the conference the Department finds it is not satisfied with the contractors response. What would be the next step taken by the Department?
Formal Hearing
By code the first inspection on a new home construction site would be ____?
Foundation
___________ indicates the type of steel beam, location of pipes, and type of footing.
Foundation plan
____________ is a signed waiver stating, full payment has been received and that there is no claim of lien
Full unconditional
A document meaning no debts are owning
Full unconditional waiver
In order to comply with MIOSHA, all power cords must be ___?
GFCI protected
The recesses cut into the door to receive the hinges are called ___?
Gains
Business tax information should be kept for a minimum of?
7 years
Ceiling joists are 16" on center, no adhesive is used, nail spacing for 1/2 inch drywall is
7" on center
3/4" wood strip flooring should be dried to a moisture content of _______ before installation in Michigan.
7% to 8%
Refer to the set of plans provided. What is the height of the ceiling in bedroom #2?
7' - 9"
A builder is required to deliver only ____ to his/her customers.
All agreements, plans, and specs
Every family room shall have not less than __________ square feet of gross floor area.
70 square feet
A 16 gage metal tie plate shall be attached to a notched top plate by the use of a minimum of __________.
8 - 10D nails to each side
A 16 gage metal tie plate shall be attached to a notched top plate by the use of a minimum of __________.
8 10D Nails
A 16 gauge metal tie plate shall be attached to a notched top plate by the use of a minimum of
8 10D nails on each side
Non-treated wood sills or bottom plates resting on concrete must be a minimum of ________ inches from exposed ground.
8 inches
Wall studs are 16" on center and no adhesive is used. Nail spacing for 1/2" drywall is
8 inches
All habitable rooms shall be provided with aggregate glazing area of not less than ______ of the floor area.
8%
Inspections are made between what hours?
8-6pm
During construction it is noticed that water is seeping into the basement through the walls. What would be the best method of dealing with the problem?
Applying a membrane to the exterior basement wall.
As the general contractor on the job site, you are responsible for overseeing the excavation and grading of the site. The soil conditions on the site consist of mostly clay. What is not true about clay?
As water content of the clay increases, the density will also increase.
2" wide by 18 to 20 gage strap bracing with a 3/8 center rib would be used in what location?
As wind bracing at outside corners
An emergency escape window well shall provide a minimum net clear area of ___.
9 square feet
An emergency escape window well shall provide a minimum net clear area of ___?
9 square feet
You are responsible for the grading and excavation on the work site. Your level (transit) reads 6.4 ft on a leveling rod that has been set up on top of a benchmark that has a given elevation of 100.0 ft. The finish grade as shown on the blueprints is 96.80 ft. Calculate what the rod reading should be on the finished grade after all fill has been placed, compacted, and graded?
9.6 feet
File a lien from last day of work within?
90 days
Which of the brick patterns is called a Flemish Bond?
A
What tool is used to measure vertical angles, run straight lines, and determine if a wall is plumb?
A carpenter's level
According to code, fireblocking is required ___?
At ceiling level
Every landing in a residential home shall be ____?
At least as wide as the stairway, at least as wide as the door served and a minimum of 36 inches wide.
Which of the brick patterns is called a Running Bond?
B
B.F.D. means?
Barrier Free Design
The site plan will indicate elevations for grading, brick ledges, and sometimes floor elevation. Which of the following MUST be shown on a site plan to use as a reference point for locating proper elevations?
Benchmark
This elevation point is used to determine all other elevations on the construction site.
Benchmark
The Department and the __________ may remove a limitation.
Board
One advantage of using trusses is that they can be engineered to carry specific loads. Prefabricated trusses that span the entire width of the house are designed to carry what loads?
Both ceiling and roof loads
A formal complaint is filed against a builder for financial mismanagement. Select the organization responsible for investigating the complaint.
Builders Investigative Unit.
From the choices below, select which project would require a builder's license. Building an addition for a friend. Renovating a kitchen in your house. Annual repair of a summer cottage. Construction of a commercial building to operate your business.
Building an addition for a friend
Homeowner and builder agree to a contract with a fixed price. If the job takes longer to complete, the builder takes the loss. This is best described as?
A lump sum contract
Money paid to a builder by a purchaser is considered to be ____.
A trust fund
What is the best piece of equipment for removing topsoil for the excavation of a foundation?
Bulldozer
A Notice of Furnishing is delivered to the _________________ by the supplier.
General contractor/owner
The _______________ appoints the members of the Board
Governor
The _______________ appoints the members of the Board.
Governor
From the answers below, select the best piece of equipment to move topsoil that is being replaced after construction of a building.
Grade-all
What is the best piece of equipment to move topsoil that is being replaced after construction of a building?
Grade-all.
A pre manufactured unit must have a ________________ before being delivered and installed on site.
Certificate of Acceptability
Issued when the subcontractor is not paid?
Claim of lien
From the choices below, select the definition that best describes "place of business".
Actual established physical location.
A change to a contract and plans which has not been bid is called?
Addendum
Select the correct answer from the choices below. What is the definition of a brick laid across two wythes of masonry?
Header
"A" is called a ___?
Header Joist
What is a story pole used to check when framing?
Height of horizontal framing members
The main purpose of flagged tips in bristles is to?
Hold more paint
When a salesperson terminates employment the salesperson returns his/her _______?
I.D. card to the Department of Licensing & regulatory Affairs within 5 days of termination
A salesperson shall turn over money for a sale to their licensed builder ___.
Immediately
The Board's duties include ___.
Interpretation of licensure requirements
The boards duties include ___.
Interpretation of licensure requirements
The Department is investigating a complaint against a contractor. The Department has requested a financial statement from the contractor. Which statement is true regarding requests for financial statements by the Department? It must be approved by the IRS. The request must be served to the residential contractor in person. It must be in writing. The request cannot ask for information protected by the Freedom of Information Act.
It must be in writing
An interior door is positioned in a ___?
Jamb
An interior door is positioned in a ____?
Jamb
What is the top stone of an archway called?
Keystone
You are in the process of constructing a block wall. Due to the size of the wall, reinforcement will be required to support the bearing loads. What is the best method to reinforce a block wall?
Ladder reinforcement every third coorse.
What makes mortar more workable but less in strength?
Lime
4 is called
Lookout
When roofing, what is the proper method for nailing shingles?
Nail straight and flush
Select the specific type of door from the choices below. What type of door consists of stiles, rails, and panels?
Panel door
What is required of a non-resident of Michigan to obtain a builders license?
Passing the Michigan builders exam and filing an irrevocable consent to service
16 x 16 fiber board ceiling tiles require _____ staples 9/16 long along each flanged edge.
Per the manufacturer's specifications
The "R" value of an insulation product refers to ____?
Resistance to heat flow
Outlet ventilation is typically installed in the
Ridge
Powder activated tools should not be used on?
Rock
The main benefit of using roof trusses instead of a conventionally framed roof is?
Roof trusses are capable of longer spans between support
One advantage of using trusses is that they can be engineered to carry specific loads. Prefabricated trusses that span the entire width of the house are designed to carry what loads?
Roof, attic, and ceiling loads.
What material that has the greatest chance of shifting during excavation?
Sand
This document indicates the location, size, style, and finish for doors and windows.
Schedule
The "cutout" on a conventionally framed rafter that rests on the top plate is called ___________.
Seat
The director is appointed with the advice and consent of the ____.
Senate
Changes in agreements shall be ___?
Signed and in writing
Changes in agreements shall be ____.
Signed and in writing
Which tool would be most appropriate for determining grade for a slab?
Strike-off board
What type of joint is shown by figure #5 on the side of the masonry cross section?
Struck
Submitted by contractor to owner when payment is due?
Sworn statement
The overhanging part of a rafter that extends beyond the exterior wall is defined as the ___?
Tail
"D" is called a:
Tail Cut
"C" is called a:
Tail joist
The most common edge used for drywall is: Bevel Square Tapered Round
Tapered
You run your business as a sole proprietorship. At the end of the year what tax rate will the IRS use to tax profits?
Tax rate of the individual who is the sole proprietor.
In reference to a lien, who must be named in a lawsuit submitted by a sub-contractor?
The Owner & General Contractor
The director of the construction code commission sole statutory authority is to?
Promulgate Rules
The director of the construction code commission sole statutory authority is to ___.
Promulgate rules
A lien is filed to ____.
Protect homeowners, suppliers, and subcontractors from law suits
A lien is filed to?
Protect homeowners, suppliers, and subcontractors from lawsuits
Insulation is rated for heat reflectivity using which symbol?
R
What represents the resistance which is the reciprocal of conductivity?
R
For zone 5A (Lower half of Michigan's Lower Peninsula) the insulation requirements for exterior walls is ___?
R-13
For zone #1 (Lower half of Michigan's Lower Peninsula) the insulation requirements for walls is?
R-21
For zone 5A, the insulation requirement for a floor over an unheated crawl space is __________.
R-30
For zone 5A, the insulation requirement for roof/ceiling area (attic) are:
R-38
For zone #1, the insulation requirement for roof/ceiling area (attic) are:
R-49
The inclined edge of a gable roof is called the ___?
Rake
What type of joint is shown by figure #7 on the side of the masonry cross section?
Raked
A lien is filed to:
Recover financial damages by General Contractors & suppliers.
You are responsible for the insulating part of a job. How should a vapor barrier on blanket (batts) insulation be installed?
face the warm side of the wall
The _________ applies for the salespersons license.
licensed residential builder
Best describes the weight of the building materials once constructed.
dead load
You are in the process of constructing a block wall. Due to the size of the wall, reinforcement will be required to support the bearing loads. What is the best method to reinforce a block wall?
Wire mesh
From the choices below, select the material with the highest R value? 1/2" drywall Wood 1/2" Air space Aluminum
Wood
Minors are required to have a ___ in order to be employed, unless specifically exempted.
Work permit
________________ hears cases related to Act 317, Section 847.
Workers Compensation Magistrate
Per Act 174 (1962 excerpt) Section 2201.1, a contract for the sale of goods for the price of $1,000.00 or more is not enforceable unless it is a _________.
Written and signed contract
Per Act 174 (1962 excerpt) Section 2201.1, a contract for the sale of goods for the price of $1,000.00 or more is not enforceable unless it is a _________. Written, dated, and signed contract Written or an oral agreement Written or witnessed oral agreement Written and signed contract
Written and signed contract
A builder shall be notified of penalties or action taken against him by the board as soon as a decision is made by the board only after ____?
The builder or contractor has had the opportunity for a conference or hearing
Dimension lines indicate ___?
The outside plane of the building
Dimension lines indicate?
The outside plane of the building
The "R" value of an insulation product refers to
The resistance to heat flow
When using an extension ladder, what is the last rung you may stand on according to MIOSHA standards?
The rung must be at least 36 inches from the top of the ladder
Two bedrooms are to be added to an existing residence. A permit is required and an interior wall is to be removed. What would be the requirements for smoke alarms? A smoke alarm is not required. There must be a minimum of two smoke alarms added. The smoke alarm system must be monitored by an outside company. The smoke alarms must be interconnected.
The smoke alarms must be interconnected
What is the purpose of an investigative hearing?
To determine if there is sufficient cause for the complaint
In trusses the main purpose of lateral bracing is ___?
To tie all trusses together for strength
Weep holes shall be located immediately _____________ the flashing.
above
Containers and drums without labeling should be considered?
as hazardous materials
Trusses are to be used in the construction of a new residential home. The trusses arrive 2 weeks ahead of schedule and will have to be stored on the site. Which of the answers shown below is true? Trusses stored horizontally should be placed on blocking that is 8-10" apart. A vapor barrier for protection from ground moisture is necessary if trusses are to be stored on the ground longer than 30 days. Trusses stored vertically need to be braced, but blocking is not required. Scissor trusses should be stored with the peak up.
Trusses stored horizontally should be placed on blocking that is 8-10" apart.
Which type of mortar would be used for masonry subjected to high compressive loads, severe frost action, high lateral loads and structure below grade?
Type M
What represents the total heat transmission loss through structural materials?
U
The first course of block is laid on top of a ____________ which is placed on top of the footing.
bed of mortar
At the eave, the metal drip edge goes ___?
Under the felt paper
Right to cancel a home solicitation agreement?
Until midnight of 3rd business day
The buyer has the right to cancel a home solicitation sales agreement after signing it ______________.
Until midnight of the 3rd business day
The buyer has the right to cancel a home solicitation agreement up to ____ after signing it?
Until midnight of the third business day
What type of joint is shown by figure #4 on the side of the masonry cross section?
Weathered?
A plot plan shows ___?
the building on the site
The overhanging part of a rafter that extends beyond the exterior wall is defined as the ____.
the eave
Changes to plans and specs should be _________ and _________ by all parties involved in that phase of construction.
signed and dated
Submitted by contractor to owner when payment is due
sworn statement
"E" is called a:
tail or overhang
When using an extension ladder, what is the last rung you may stand on according to MIOSHA standards?
must be at least 36" from the top of the ladder
When using an extension ladder, what is the last rung you may stand on according to MIOSHA standards?
must be at least 36" from the top of the ladder.
Per EPA 747-B-99-004, the lead pre renovation rule (PRE) applies to residential homes built ___?
prior to 1978
The 2 main purposes of house wrap is to ___?
reduce air infiltration and moisture build up
The "R" value of an insulation product refers to?
resistance to heat flow
Minors are required to have a ___________ in order to be employed, unless specifically exempted.
work permit
If on the job an injury is related to "unintentional horse play", is the injury workers comp compensable?
yes
In what location would a strongback be used?
On the attic side of long ceiling joists
The main purpose of flagged tips in bristles is to?
create a finer line for "cutting in" paints of different colors
When nailing 1/2" O.S.B. board to floor joists, what is the minimum nail size?
6D common
How many bricks are in a square foot?
7
Which number indicates a raked joint?
7
Per the EPA lead pre renovation rule (PRE), if a contractor mails the lead pamphlet it must be done ______ days before renovation begins and documented with a certificate of mailing.
7 days
A living room , bedroom, or family room, shall not be less than ___________ in any horizontal direction.
7 feet
Habitable rooms, hallways and basements shall have a ceiling height not less than _______.
7 feet
Ceiling joists are 16" on center, no adhesive is used, nail spacing for 1/2 inch drywall is
7 inches
Ceiling joists are 16" on center, no adhesive is used, nail spacing for 1/2 inch drywall is ___?
7 inches
From the choices below select the best definition of "complaint". Written letter from the owner describing the failure to perform by the residential builder or M&A contractor. Claim filed in small claims court against a residential builder. Oral or written grievance filed by the Department. Affidavit submitted to the Department by the homeowner detailing the problem with the residential builder.
Oral or written grievance filed by the Department.
An employer may pay a new employee who is less than 20 years of age a training hourly wage of _________ for the first 90 days.
$4.25
In reference to the A.D.A., civil penalties may not exceed _________ for a first violation.
$55,000
In reference to the A.D.A., civil penalties may not exceed _________ for a first violation?
$55,000
If death results from an injury, the employer without worker's compensation insurance shall pay reasonable expenses of the funeral and burial. Costs shall not exceed ____________.
$6,000
An employers willful violation of MIOSHA regulations may result in a fine up to?
$70,000
The minimum wage is _____ for 2017.
$8.90
Per Table R 402.2, the minimum PSI of a concrete foundation is ____?
2500 psi
The ratio of backspan to cantilever floor joists shall not be less than ______ when supporting light frame exterior bearing walls and roof only.
3 to 1
Personal tax records should be kept for a minimum of?
3 years
"B" indicates a ____?
Dimension Line
In order to be effective, foil faced insulation must have the foil side: •exposed to a 1" or more air space •be in contact with the drywall •facing the exterior siding •have contact with another vapor barrier
Exposed to a 1" or more air space
What tax is withheld from an employee's check in order to pay medical bills after retirement?
FICA
In order to be effective, foil faced insulation must have the foil side ____________.
Facing the exterior siding
Per Act 230, stairwell geometry with 1" nosing is ___?
Maximum riser 8 1/4" minimum tread 9
A builder is installing replacement windows that do NOT contain safety glazing. If the bottom edge is less than 10 inches above the floor, what is the maximum permissible size of a single pain in these replacement windows according to code limits?
Not Permitted
A non-licensed builder may ____ file a lien on a dwelling they themselves built.
Never
Can an employer deduct wages from an employee to cover workers comp?
Never
The project you are working on requires a poured concrete foundation and was originally scheduled to start in October. Due to circumstances beyond your control, the start of the project is delayed until December. When is it acceptable to pour concrete over frozen subgrade?
Never
The first notice issued in reference to a lien is ____.
Notice of commencement
The federal retirement fund is known as?
Social Security
Per the home solicitation sales Act 227, which of the following is prohibited?
Solicitation with a recorded message
The most common type of truss used in homes today is the ___?
W-truss (fink).
What is submitted by contractor to owner when payment is due?
Waiver
Bleeding is defined as ____.
Water rising to the surface of the concrete
What type of tie is used to attach masonry to other masonry structures?
Z-Bar
Masonry flashing shall be located ______________________.
below the first course above grade
Truss design drawings shall be provided to the ______________ and approved prior to installation.
building official
The general practice is to make the footing _____________ as wide as the wall it supports.
twice
