Carpentry- Building Materials, Fasteners, and Adhesives
Carriage bolt
A bolt with an oval, unslotted head is called a
27
A cubic yard of concrete contains how many cubic feet?
Cut nail
A nail that is rectangular in cross section and has a blunt point is called a
Particleboard
An engineered wood product that consists of wood particles combined with a binder and is formed into panels under heat and pressure is classified as
Dimension lumber
Light framing Lumber is classified as
The lumber is cut with the growth rings at an angle greater than 45 degrees
The term "quarter-sawed" means
Epoxy
The type of adhesive that is applied with a dual-chamber applicator is
Self-drilling anchor
The type of anchor that has a cutting sleeve, which is used first as a drill bit and later becomes the expandable anchor itself is a(n)
rests with you
The ultimate responsibility for workplace safety
properly stored and handled
To avoid costly damage to lumber and plywood, they must be
Anchor bolt
What fastener needs to be installed prior to concrete placement?
Drill a pilot hole
When driving wood screws in hardwood, it is usually necessary to
Lift with your legs not your back
When lifting an object,
Tempered
Which grade of hardboard can be used in exterior applications?
It is immune to damage from insects and weather
Which of the following is NOT an advantage of wood as a building material?
Burn any scrap pieces
Which of the following is NOT recommended when cutting pressure-treated lumber?
They are shorter and thicker than common roofing nails
Which of the following statements about roofing panels is NOT true?
The size of the glove does not matter
Which of the following statements about work gloves is NOT true?
Veneer
Which of these core materials is most common in softwood plywood?
LSL
Which of these types of engineered lumber would be more likely to be used for millwork than as support beams?
Lignin
Wood fibers are bound together by a substance called
57
In 2010, the percentage of construction worker deaths resulting from the "Fatal Four" was
Concrete Masonry Unit
The abbreviation CMU stands for
Green
Concrete that has hardened but not yet gained structural strength is referred to as
20 gauge steel
Heavy-gauge framing members are manufactured from
39
How many 4' x8' sheets of plywood will be needed for a roof that measures 26' x 48'?
320
How many board feet are in forty 2" x 4" x 12' studs?
