Chapter 24 review
choice D
Anchor bolt
Active seat belts
Buckled by vehicle occupants
scan
DTCs are retrieved with a(n) ______________________________ tool
Single-stage air bags
Deploy at one level of intensity
Accelerometer
Detect deceleration
Gyrometer
Detects rollover
t, true
If a problem with the air bag system is detected, the air bag lamp remains illuminated after the self-diagnostic check is completed. t/f
immediately deflates
In air bag deployment, the air bag inflates, then ____.
t, true
In an advanced air bag system, if the seat is too close to the dash when the air bag deploys, a tether on the bag limits the inflated air bag to half the full inflated size. t/f
choice A
Latch plate
Tether
Limits air bag inflation
f, false
Power seats have one electric motor. t/f
choice B
Retractor
pretensioners
Seat belt ______________________________ tighten the seat belt or retractor during a collision.
t, true
Some manufacturers recommend the replacement of all seat belts in use during any collision that deploys air bags, regardless of stretching. t/f
t, true
The air bag will not deploy unless the safing sensor also detects the rapid deceleration and signals the control module. t/f
nylon
The lap belt and shoulder belt are made of ______________________________ webbing
t, true
The lap belt is mounted to the floor of the vehicle at the end of each belt. t/f
f, false
The passenger air bag sensor detects that a rollover is occurring and sends a signal to the control unit. t/f
f, false
The steering column is designed to resist the forward motion of a driver during a collision. t/f
f, false
The threshold for airbag deployment requires that the vehicle be traveling at least 5 mph and strikes head-on into a solid, immovable object. t/f
Pretensioner
Tightens seat belt
Lap belt
Two-point seat belt
Windshield
Which of the following serves as a backstop during passenger side air bag deployment?
f, false
You should carry an undeployed air bag pointing toward your body. t/f