Chapter 5: Earthquakes and Earth's Interior

अब Quizwiz के साथ अपने होमवर्क और परीक्षाओं को एस करें!

Seismographs/Seismometers

An instrument designed to amplify ground motion in order to detect very weak earthquakes or a great earthquake that has occurred in another part of the world. Has a weight freely suspended from a support that is securely attached to bedrock. When vibrations from an earthquake reach the instrument, the inertia of the weight keeps it relatively stationary while Earth and the support move.

Richter scale

Calculated by measuring the amplitude of the largest seismic wave recorded on a seismogram.

Tsunami

Caused by major undersea earthquakes that set in motion a series of large ocean waves that are known by this Japanese name.

Modified Mercalli Intensity Scale

Developed using California buildings as its standard. Based on the 12-point Mercalli Intensity scale, an area in which some well-built wood structures and most masonry buildings are destroyed by an earthquake would be assigned a Roman numeral X.

Intraplate Earthquakes

Earthquakes that do not take place along traditional mid-ocean ridges, fracture zones, or ocean trenches but rather in the middle of plates. Troublesome earthquakes.

Precursors

Events or changes that precede an earthquake and thus might provide a warning.

Moment magnitude

Favored scale for measuring medium and large earthquakes, which estimates the total energy released during an earthquake.

Megathrust fault

Forms when convergence entails the subduction of oceanic lithosphere under another plate, and the area of contact between the two plates forms an extensive fault zone, that can be several thousand kilometers long.

Earthquake

Ground shaking caused by the sudden and rapid movement of one block of rock slipping past another along fractures in Earth's crust, called faults.

Fracking

Injection of water, sand, and chemicals down and across into horizontally drilled wells, so that natural gas can flow up into the well.

NEPEC

National Earthquake Prediction Evaluation Council

Inertia

Objects at rest tend to stay at rest, and objects in motion tend to remain in motion, unless acted upon by an outside force.

Seismic gap

A segment that has not experienced an earthquake within the past one to several centuries.

Earthquake Prediction

A short-term (hours to days) statement that an earthquake will occur at a given location.

Hypocenter

The location where slippage begins is called the _____________ , or focus.

Liquefaction

The phenomenon of transforming a somewhat stable soil into mobile material capable of rising toward Earth's surface.

Epicenter

The point on Earth's surface directly above the hypocenter is called the _______________ .

Seismograms

The records obtained by seismographs that provide useful information about the nature of seismic waves. Reveal that two main types of seismic waves are generated by the slippage of a rock mass.

Seismology

The study of earthquake waves.

Paleoseismology

The study of the timing, location, and size of prehistoric earthquakes.

Circum-Pacific belt

The zone of greatest seismic activity which encompasses the coastal regions of Chile, Central America, Indonesia, Japan, and Alaska, including the Aleutian Islands.

Secondary waves

These waves shake the particles at right angles to their direction of travel. These waves change the shape of the material that transmits them. Liquids and gasses do not transmit these waves.

Magnitude (scales)

Use data from seismographs to estimate the amount of energy released at an earthquake's source.

Intensity (scales)

Uses observed property damage to estimate the amount of ground shaking at a particular location.

Surface waves

Waves that travel in the rock layers just below Earth's surface. There are two types of surface waves. One causes surface and anything resting on it to move up and down and the second causes Earth's surface to move from side to side.

Body waves

Waves that travel through Earth's interior. Further divided into two types - primary waves (P Waves) and secondary waves (S Waves) which are identified by their mode of travel through intervening materials.

Earthquake Hazard Analysis

What is the probability that a given amount of ground shaking will occur during a given period of time at some location?

Elastic rebound

When slippage allows the deformed (bent) rock to "snap back" to its original, stress-free, shape; a series of earthquake waves radiate outward as it slides.

Earthquake Forecasting

A long-term (years to decades) statement of the probability of an earthquake in a region (or the probability of one or more earthquakes in a region).

Probability

A number expressing the likelihood that a specific event will occur, expressed as the ratio of the number of actual occurrences to the number of possible occurrences.

Seismic waves

A form of energy that travels through the lithosphere and Earth's interior. The energy carried by these waves causes the material that transmits them to shake.

Primary waves

Push/pull waves; they momentarily push (compress) and pull (stretch) rocks in the direction the waves are traveling. This wave motion is similar to that generated by striking a drum, which moves air back and forth to create sound. Solids, liquids, and gasses resit stresses that change their volume when compressed and, therefore, elastically spring back once the stress is removed. These waves can travel through all these materials.

Pressure Axis

Reflects the maximum compressive stress direction.

Tension Axis

Reflects the minimum compressive stress direction.

Locked Faults

Result when the confining pressure exerted by the overlying crust is enormous, causing these fractures in the crust to be "squeezed shut".

Fault creep

Slow, gradual displacement, exhibited by some sections of the San Andreas fault that produce little seismic shaking.

Foreshocks

Small earthquakes that often, but not always, precede major earthquakes by days or, in some cases, several years.

Aftershocks

Strong earthquakes are followed by numerous earthquakes of lesser magnitude, called ____________ , which result from crust along the fault surface adjusting to the displacement caused by the main shock.


संबंधित स्टडी सेट्स

Chapter 5 - Types of Insurers and Marketing Systems

View Set

large-scale metal mining corporations

View Set

Medical Insurance Chapter 15 Workers Compensation

View Set

M11, C12 - Procedural Safeguards

View Set

Unit #3: Regulation of Broker-Dealers and Their Agents

View Set

Nurs 4 - Nursing Process: Implementation NCLEX RN EAQ's

View Set

PrepU Theory, Research, and Evidence-Informed Practice Chapter 2

View Set