Chapter 6

अब Quizwiz के साथ अपने होमवर्क और परीक्षाओं को एस करें!

16) A Six Sigma program has how many defects per million? A) 3.4 B) 34 C) 1000 D) 6 times the standard deviation E) 2700

Answer: A

they are all major categories of costs associated with quality.

Answer: E

13) PDCA, developed by Shewhart, stands for which of the following? A) Plan-Do-Check-Act B) Plan-Develop-Check-Accept C) Problem-Develop Solution-Check-Act D) Problem-Do-Continue-Act E) Prepare-Develop-Create-Assess

Answer: A

20) To become ISO 9000 certified, organizations must: A) document quality procedures. B) have an onsite assessment. C) have an ongoing series of audits of their products or service. D) all of the above E) none of the above

Answer: D

22) A successful TQM program incorporates all EXCEPT which of the following? A) continuous improvement B) employee involvement C) benchmarking D) centralized decision-making authority E) JIT

Answer: D

3) Which of the following statements regarding Arnold Palmer Hospital is FALSE? A) The hospital uses a wide range of quality management techniques. B) The culture of quality at the hospital includes employees at all levels. C) The hospital scores very highly in national studies of patient satisfaction. D) The hospital's high quality is measured by low readmission rates, not patient satisfaction. E) The design of patient rooms, even wall colors, reflects the hospital's culture of quality.

Answer: D

30) A quality loss function includes all of the following costs EXCEPT: A) the cost of scrap and repair. B) the cost of customer dissatisfaction. C) inspection, warranty, and service costs. D) sales costs. E) costs to society.

Answer: D

31) A manager tells her production employees, "It's no longer good enough that your work falls anywhere within the specification limits. I need your work to be as close to the target value as possible." Her thinking is reflective of: A) internal benchmarking. B) Six Sigma. C) ISO 9000. D) Taguchi concepts. E) process control charts.

Answer: D

2) An improvement in quality must necessarily increase costs.

Answer: FALSE

8) Line employees need the knowledge of TQM tools.

Answer: TRUE

11) A quality circle holds a brainstorming session and attempts to identify the factors responsible for flaws in a product. Which tool do you suggest they use to organize their findings? A) Ishikawa diagram B) Pareto chart C) flowchart D) control charts E) activity chart

Answer: A

17) A hospital benchmarked against Ferrari Racing in an effort to: A) improve patient handoff quality. B) increase surgery prep time. C) lengthen surgery duration. D) reduce the number of doctors. E) all of the above

Answer: A

19) Regarding the quality of design, production, and distribution of products, an ethical requirement for management is to: A) determine whether any of the organization's stakeholders are being wronged by poor quality products. B) gain ISO 9000 certification for the organization. C) obtain a product safety certificate from the Consumer Product Safety Commission. D) have the organization's legal staff write disclaimers in the product instruction booklets. E) compare the cost of product liability to the external failure cost.

Answer: A

23) The work by ________ regarding how people learn from each other's successes led to the field of cross-functional teamwork.

Answer: A

29) Costs of dissatisfaction, repair costs, and warranty costs are elements of cost in the: A) quality loss function. B) Pareto chart. C) ISO 9000 quality cost calculator. D) process chart. E) Ishikawa diagram.

Answer: A

4) The "four Ms" of cause-and-effect diagrams are: A) material, machinery/equipment, manpower, and methods. B) material, methods, men, and mental attitude. C) named after four quality experts. D) material, management, manpower, and motivation. E) mentality, motivation, management, and manpower.

Answer: A

7) A production manager at a pottery factory has noticed that about 70 percent of defects result from impurities in raw materials, 15 percent result from human error, 10 percent from machine malfunctions, and 5 percent from a variety of other causes. This manager is most likely using: A) a Pareto chart. B) a scatter diagram. C) a quality loss function. D) a cause-and-effect diagram. E) a flowchart.

Answer: A

7) Quality can improve profitability by reducing costs. Which of the following is not an aspect of reduced costs by quality improvements? A) flexible pricing B) increased productivity C) lower rework and scrap costs D) lower warranty costs E) All of the above are aspects of reduced costs by quality improvements.

Answer: A

9) A checklist is a type of: A) poka-yoke. B) kaizen. C) kanban. D) Pareto chart E) flowchart

Answer: A

9) A fishbone chart is also known as a: A) cause-and-effect diagram. B) poka-yoke diagram. C) Kaizen diagram. D) Kanban diagram. E) Taguchi diagram.

Answer: A

the other is a comprehensive quality system. B) Six Sigma means that about 94 percent of a firm's output is free of defects. C) The Six Sigma program was developed by Toyota in the 1970s. D) The Six Sigma program is for manufacturing firms and is not applicable to services. E) Six Sigma certification is granted by the International Standards Organization (ISO).

Answer: A

10) If a sample of parts is measured and the mean of the measurements is outside the control limits, the process is: A) in control, but not capable of producing within the established control limits. B) out of control and the process should be investigated for assignable variation. C) within the established control limits with only natural causes of variation. D) monitored closely to see if the next sample mean will also fall outside the control limits. E) none of the above.

Answer: B

18) One of Britain's largest children's hospitals working with Ferrari Racing is an example of: A) internal benchmarking. B) external benchmarking. C) Taguchi concepts. D) employee empowerment. E) corporate responsibility.

Answer: B

21) Total quality management emphasizes: A) the responsibility of the quality control staff to identify and solve all quality-related problems. B) a commitment to quality that goes beyond internal company issues to suppliers and customers. C) a system where strong managers are the only decision makers. D) a process where mostly statisticians get involved. E) ISO 14000 certification.

Answer: B

5) Among the tools of TQM, the tool ordinarily used to aid in understanding the sequence of events through which a product travels is a: A) Pareto chart. B) flowchart. C) check sheet. D) Taguchi map. E) poka-yoke.

Answer: B

6) The process improvement technique that sorts the vital few from the trivial many is: A) Taguchi analysis. B) Pareto analysis. C) benchmarking. D) Deming analysis. E) Yamaguchi analysis.

Answer: B

7) "Quality lies in the eyes of the beholder" is: A) an unrealistic definition of quality. B) a user-based definition of quality. C) a manufacturing-based definition of quality. D) a product-based definition of quality. E) the definition of quality proposed by the American Society for Quality.

Answer: B

7) Poka-yoke is the Japanese term for: A) card. B) foolproof. C) continuous improvement. D) fishbone diagram. E) just-in-time production.

Answer: B

8) A customer service manager at a retail clothing store has collected numerous customer complaints from the forms they fill out on merchandise returns. To analyze trends or patterns in these returns, she has organized these complaints into a small number of sources or factors. This is most closely related to the ________ tool of TQM. A) quality loss function B) cause-and-effect diagram C) scatter diagram D) histogram E) process control chart

Answer: B

11) A(n) ________ is a type of poka-yoke that lists the steps needed to ensure consistency and completeness in a task.

Answer: Checklist

33) Enlarging employee jobs so that the added responsibility and authority is moved to the lowest level possible in the organization is called ________.

Answer: Employee empowerment

1) Managers at Arnold Palmer Hospital take quality so seriously that the hospital typically is a national leader in several quality areas-so that continuous improvement is no longer necessary.

Answer: FALSE

1) Quality is mostly the business of the quality control staff, not ordinary employees.

Answer: FALSE

1) The Japanese use the term poka-yoke to refer to continuous improvement.

Answer: FALSE

10) The quality loss function indicates that costs related to poor quality are low as long as the product is within acceptable specification limits.

Answer: FALSE

2) Conforming to standards is the focus of the product-based definition of quality.

Answer: FALSE

2) Source inspection is inferior to inspection before costly operations.

Answer: FALSE

5) Deming's writings on quality tend to focus on the customer and on fitness for use, unlike Juran's work that is oriented toward meeting specifications.

Answer: FALSE

10) ________ is doing the job properly with the operator ensuring that this is so.

Answer: Source inspection

1) Pareto charts are a graphical way of identifying the few critical items from the many less important ones.

Answer: TRUE

1) The definition of quality adopted by The American Society for Quality is a customer-oriented (i.e., user based) definition.

Answer: TRUE

2) A cause-and-effect diagram helps identify the sources of a problem.

Answer: TRUE

2) TQM is important because each of the ten decisions made by operations managers deals with some aspect of identifying and meeting customer expectations.

Answer: TRUE

3) A checklist is a type of poka-yoke to help ensure consistency and completeness in carrying out a task.

Answer: TRUE

3) Internal failure costs are associated with scrap, rework, and downtime.

Answer: TRUE

22) ________ costs result from production of defective parts or services before delivery to the customer.

Answer: Internal failure

32) ________ is the Japanese word for the ongoing process of unending improvement.

Answer: Kaizen

4) Continuous improvement is based on the philosophy that any aspect of an operation can be improved.

Answer: TRUE

4) Philip Crosby is credited with both of these quality catch-phrases: "quality is free" and "zero defects."

Answer: TRUE

5) Kaizen is similar to TQM in that both are focused on continuous improvement.

Answer: TRUE

6) Improved quality can increase profitability via allowing flexible pricing.

Answer: TRUE

6) Quality circles empower employees to improve productivity by finding solutions to work-related problems in their work area.

Answer: TRUE

9) One of the ways that just-in-time (or JIT) influences quality is that by reducing inventory, bad quality is exposed.

Answer: TRUE

the other is a comprehensive system for achieving and sustaining business success.

Answer: TRUE

35) A group of employees that meet on a regular basis with a facilitator to solve work-related problems in their work area is a(n) ________.

Answer: quality circle

15) A Three Sigma program has how many defects per million? A) 34 B) 3 C) 3 times the standard deviation D) 2700 E) 1500

Answer: D

13) Which of the following is FALSE regarding control charts? A) Values above the upper control limits imply that the product's quality is exceeding expectations. B) Control charts are built so that new data can be quickly compared to past performance data. C) Control charts graphically present data. D) Control charts plot data over time. E) None of the above is false.

Answer: A

18) Stakeholders who are affected by the production and marketing of poor quality products include: A) stockholders, employees, and customers. B) suppliers and creditors, but not distributors. C) only stockholders, creditors, and owners. D) suppliers and distributors, but not customers. E) only stockholders and organizational executives and managers.

Answer: A

19) If 1 million passengers pass through the St. Louis Airport with checked baggage each month, a successful Six Sigma program for baggage handling would result in how many passengers with misplaced luggage? A) 3.4 B) 6.0 C) 34 D) 2700 E) 6 times the monthly standard deviation of passengers

Answer: A

4) The goal of inspection is to: A) detect a bad process immediately. B) add value to a product or service. C) correct deficiencies in products. D) correct system deficiencies. E) all of the above

Answer: A

9) Three broad categories of definitions of quality are: A) product quality, service quality, and organizational quality. B) user based, manufacturing based, and product based. C) internal, external, and prevention. D) low-cost, response, and differentiation. E) Pareto, Shewhart, and Deming.

Answer: B

34) ________ selects a demonstrated standard of performance that represents the very best performance for a process or an activity.

Answer: Benchmarking

14) PDCA is most often applied with regard to which aspect of TQM? A) Six Sigma B) employee empowerment C) continuous improvement D) benchmarking E) JIT

Answer: C

15) Which of the following statements is NOT true? A) Self-promotion is not a substitute for quality products. B) Inferior products harm a firm's profitability and a nation's balance of payments. C) Product liability transfers from the manufacturer to the retailer once the retailer accepts delivery of the product. D) Quality-be it good or bad-will show up in perceptions about a firm's new products, employment practices, and supplier relations. E) Legislation such as the Consumer Product Safety Act sets and enforces product standards by banning products that do not reach those standards.

Answer: C

17) "Quality Is Free," meaning that the costs of poor quality have been understated, is the work of: A) W. Edwards Deming. B) Joseph M. Juran. C) Philip B. Crosby. D) Crosby, Stills, and Nash. E) Armand Feigenbaum.

Answer: C

27) Building high-morale organizations and building communication networks that include employees are both elements of: A) ISO 9000 certification. B) Six Sigma certification. C) employee empowerment. D) Taguchi methods. E) the tools of TQM.

Answer: C

28) The process of identifying other organizations that are best at some facet of your operations and then modeling your organization after them is known as: A) continuous improvement. B) employee empowerment. C) benchmarking. D) copycatting. E) patent infringement.

Answer: C

3) Pareto charts are used to: A) identify inspection points in a process. B) outline production schedules. C) organize errors, problems, or defects. D) show material flow. E) show the range of values of a measurement and the frequency with which each value occurs.

Answer: C

8) "Making it right the first time" is: A) an unrealistic definition of quality. B) a user-based definition of quality. C) a manufacturing-based definition of quality. D) a product-based definition of quality. E) the definition of quality proposed by the American Society for Quality

Answer: C

8) Arnold Palmer Hospital uses ________ to seek new ways to reduce readmission rates.

Answer: Continuous improvement

10) According to the manufacturing-based definition of quality: A) quality is the degree of excellence at an acceptable price and the control of variability at an acceptable cost. B) quality depends on how well the product fits patterns of consumer preferences. C) even though quality cannot be defined, you know what it is. D) quality is the degree to which a specific product conforms to standards. E) quality lies in the eyes of the beholder.

Answer: D

12) Based on his 14 Points, Deming is a strong proponent of: A) inspection at the end of the production process. B) an increase in numerical quotas to boost productivity. C) looking for the cheapest supplier. D) training and knowledge. E) all of the above.

Answer: D

12) When sample measurements falls inside the control limits, it means that: A) each unit manufactured is good enough to sell. B) the process limits cannot be determined statistically. C) the process output exceeds the requirements. D) if there is no other pattern in the samples, the process is in control. E) the process output does not fulfill the requirements.

Answer: D

13) Which of the four major categories of quality costs is particularly hard to quantify? A) prevention costs B) appraisal costs C) internal failure costs D) external failure costs E) None is hard to quantify.

Answer: D

14) GE's recall of 3.1 million dishwashers cost the company more in repairs than the value of the actual dishwashers. This is an example of which quality principle? A) PDCA B) internal failure costs C) appraisal costs D) cost of poor quality is underestimated E) prevention costs

Answer: D

16) "The employee cannot produce products that on average exceed the quality of what the process is capable of producing" expresses a basic philosophy in the writings of: A) Vilfredo Pareto. B) Armand Feigenbaum. C) Joseph M. Juran. D) W. Edwards Deming. E) Philip B. Crosby.

Answer: D

20) Suppose that a firm has historically been achieving "Three Sigma" quality. If the firm later changes its quality management practices such that it begins to achieve "Six Sigma" quality, which of the following phenomena will result? A) The average number of defects will be cut in half. B) The specification limits will be moved twice as far from the mean. C) The average number of defects will be cut by 99.9997%. D) The average number of defects will be cut by 99.87%. E) The average number of defects will be cut by 99.73%.

Answer: D

5) Companies with the highest levels of quality are how many times more productive than their competitors with the lowest quality levels? A) 2 B) 3 C) 4 D) 5 E) None of the above because quality has no impact on productivity (units/labor hr.).

Answer: D

8) In his book, Safe Patients, Smart Hospitals, Dr. Peter Pronovost emphasizes the use of what tool to reduce catheter infections? A) a Pareto chart B) a flowchart C) a cause-and-effect diagram D) a checklist E) a statistical process control chart

Answer: D

12) All of the following costs are likely to decrease as a result of better quality EXCEPT: A) customer dissatisfaction costs. B) inspection costs. C) scrap costs. D) warranty and service costs. E) maintenance costs.

Answer: E

21) What is a set of quality standards developed by the International Organization for Standardization? A) Malcolm Baldrige National Quality Award B) Deming Prize C) ISO 14000 D) IOS 2009 E) ISO 9000

Answer: E

23) Kaizen is a Japanese term meaning: A) a foolproof mechanism. B) just-in-time (JIT). C) a fishbone diagram. D) setting standards. E) continuous improvement.

Answer: E

25) Members of quality circles are: A) paid according to their contribution to quality. B) external consultants designed to provide training in the use of quality tools. C) always machine operators. D) all trained to be facilitators. E) None of the above, all of the statements are false.

Answer: E

26) Techniques for building employee empowerment include: A) building communication networks that include employees. B) developing open, supportive supervisors. C) moving responsibility from both managers and staff to production employees. D) building high-morale organizations. E) All of the above are techniques for employee empowerment.

Answer: E

3) What refers to training and empowering frontline workers to solve a problem immediately? A) just-in-time B) poka-yoke C) benchmarking D) kaizen E) service recovery

Answer: E

4) Arnold Palmer Hospital uses which of the following quality management techniques? A) Pareto charts B) flowcharts C) benchmarking D) just-in-time E) The hospital uses all of the above techniques.

Answer: E

5) Which of the following is not a typical inspection point? A) upon receipt of goods from your supplier B) when production or service is complete C) before the product is shipped to the customer D) at the supplier's plant while the supplier is producing E) after a costly process

Answer: E

6) A good description of source inspection is inspecting: A) materials upon delivery by the supplier. B) the goods at the production facility before they reach the customer. C) the design specifications. D) goods at the supplier's plant. E) one's own work.

Answer: E

6) A successful quality strategy features which of the following elements? A) an organizational culture that fosters quality B) an understanding of the principles of quality C) engaging employees in the necessary activities to implement quality D) A and C E) A, B, and C

Answer: E

in practice, 1 to 2% defects is acceptable. E) consistent with the commitment to continuous improvement.

Answer: E

it is not appropriate to benchmark by comparing one of your divisions to another of your divisions.

Answer: FALSE

24) Not only customers, but stockholders, suppliers, and others, are among the ________ whose values must be protected in making ethical decisions concerning the quality of products.

Answer: stakeholders


संबंधित स्टडी सेट्स

ExamFX Guaranteed Exam Wrong/Missed Questions

View Set

Ch. 6 Success Bacteriology (360 q.)

View Set

Renal Module: Loop of Henle & Vasa Recta

View Set