Chapter 6 - PC

अब Quizwiz के साथ अपने होमवर्क और परीक्षाओं को एस करें!

Which of the following LAN devices receives a signal on one port and forwards that signal only to the port where the destination device is connected? A. Switch B. Hub C. Network adapter D. Router

A.

Which of the following describes an IPv6 address? (Select TWO.) -32-bit address -128-bit address -64-bit address -Four decimal octets -Eight hexadecimal quartets

-128-bit address -Eight hexadecimal quartets

Which of the following are valid IPv6 addresses? (Select TWO.) -141:0:0:0:15:0:0:1 -A82:5B67:7700:AH0A:446A:779F:FFE3:0091 -343F:1EEE:ACDD:2034:1FF3:5012 -6384:1319:7700:7631:446A:5511:8940:2552 -165.15.78.53.100.1

-141:0:0:0:15:0:0:1 -6384:1319:7700:7631:446A:5511:8940:2552

Which of the following are not valid IP addresses? (Select THREE.) -145.8.260.7 -257.0.122.55 -116.0.0.116 -1.55.254.3 -122.0.0.0 -45.22.156.256 -132.64.32.8

-145.8.260.7 -257.0.122.55 -45.22.156.256

Which of the following are valid IP addresses? (Select TWO.) -192.168.1.512 -1.254.1.1024 -172.16.1.26 -256.0.0.1 -2.2.2.2 -10.384.0.3 -254.7.1.417

-172.16.1.26 -2.2.2.2

An administrator configures a server to run the TCP/IP suite protocol that allows users to download files contained in specific directories on the server and also protects access to those files by requiring user authentication. Which of the following TCP/IP port numbers allow this protocol to work properly? (Select TWO). -20 -21 -53 -80 -110

-20 -21

Which of the following statements about the Dynamic Host Configuration Protocol (DHCP) are true? (Select TWO.) -A workstation must request addressing information from a DHCP server. -It can deliver a DNS server address in addition to the host IP address. -It can only deliver IP addresses to hosts. -The DHCP server detects workstations when they attach to the network and automatically delivers IP addressing information to them. -It cannot be configured to assign the same IP address to the same host each time it boots.

-A workstation must request addressing information from a DHCP server. -It can deliver a DNS server address in addition to the host IP address.

You are the IT technician for your company. Which of the following mechanisms would BEST allow you to resolve a hostname into its associated IP address? (Select TWO). -DHCP -FTP -DNS -BOOTP -hosts file

-DNS -hosts file

A technician is configuring the static TCP/IP settings on a client computer. Which of the following configurations are needed for internet communications? (Select THREE.) -DNS server address -Default gateway address -DHCP server address -APIPA address -Alternate IP address -WINS address -IP address including a subnet mask (IPv4) or subnet prefix length (IPv6)

-DNS server address -Default gateway address -IP address including a subnet mask (IPv4) or subnet prefix length (IPv6)

Which of the following are features of Basic Rate ISDN (BRI)? (Select THREE.) -Dial-up connection -Always-on connection -Up to 24 data channels -One control channel -Three control channels -Two data Channels

-Dial-up connection -One control channel -Two data Channels

You are configuring an ADSL connection. Which of the following will be part of the configuration? (Select TWO.) -Analog modem -An RG6 cable -Filters or splitters -F-type connectors -RJ11 connectors

-Filters or splitters -RJ11 connectors

Which of the following correctly describe the most common format for expressing IPv6 addresses? (Select TWO.) -Hexadecimal numbers -32 numbers, grouped using colons -Decimal numbers -Binary numbers -128 numbers, grouped using colons

-Hexadecimal numbers -32 numbers, grouped using colons

Which of the following are advantages of using fiber optic cabling for a network, as opposed to other types of cabling? (Select TWO.) -Faster installation -Immunity to electromagnetic interference -Greater cable distances without a repeater -Lower installation cost Increased flexibility

-Immunity to electromagnetic interference -Greater cable distances without a repeater

A user is configuring an email client application and plans to use a standard TCP/IP suite protocol to retrieve email messages from an email server. Which of the following TCP/IP suite protocols can be used to retrieve email messages? (Select TWO). -Simple Mail Transfer Protocol (SMTP) -Lightweight Directory Access Protocol (LDAP) -Internet Message Access Protocol (IMAP) -Simple Network Management Protocol (SNMP) -Post Office Protocol (POP3)

-Internet Message Access Protocol (IMAP) -Post Office Protocol (POP3)

Which of the following statements accurately describes how a modem works? (Select TWO.) -It transmits digital signals over ordinary telephone copper wiring at a rate up to 128 Kbps. -It modulates digital data from a telephone network into analog data that a PC can use. -It demodulates analog PC data into digital data that can be transmitted through a telephone network. -It modulates digital data from the PC into analog data and transmits it on a telephone network. -It demodulates analog data from a telephone network into digital PC data. -It communicates over a telephone network using digital signals.

-It modulates digital data from the PC into analog data and transmits it on a telephone network. -It demodulates analog data from a telephone network into digital PC data.

Which of the following are characteristics of coaxial network cable? (Select TWO.) -It is totally immune to electromagnetic interference (EMI). -It uses two concentric metallic conductors. -It has a conductor made from copper in the center of the cable. -It is made of plastic or glass in the center of the cable. -The conductors within the cable are twisted around each other to eliminate crosstalk.

-It uses two concentric metallic conductors. -It has a conductor made from copper in the center of the cable.

Which of the following tools allow remote server management? (Select TWO.) -POP3 -FTP -Telnet -LDAP -SSH

-Telnet -SSH

Which of the following identifies the prefix component of an IPv6 address? (Select TWO.) -The last quartet of an IPv6 address. -The first quartet of an IPv6 address. -The first 64 bits of an IPv6 address. -The last 64 bits of an IPv6 address. -The last four quartets of an IPv6 address. -The first four quartets of an IPv6 address.

-The first 64 bits of an IPv6 address. -The first four quartets of an IPv6 address.

Which of the following identifies the Interface ID component of an IPv6 address? (Select TWO.) -The last four quartets of an IPv6 address. -The fourth quartet of an IPv6 address. -The last 64 bits of an IPv6 address. -The first quartet of an IPv6 address. -The last quartet of an IPv6 address. -The first four quartets of an IPv6 address.

-The last four quartets of an IPv6 address. -The last 64 bits of an IPv6 address.

Which of the following is true of a network using the 1000Base-T standard? (Select TWO.) -The network operates at one gigabit per second. -The network uses copper UTP cables. -The network operates at 10 gigabits per second. -The network operates at one kilobit per second. -The network uses fiber optic cables.

-The network operates at one gigabit per second. -The network uses copper UTP cables.

Which of the following is true of a network using the 1000Base-T standard? (Select TWO.) -The network operates at 10 gigabits per second. -The network uses copper UTP cables. -The network operates at one kilobit per second. -The network uses fiber optic cables. -The network operates at one gigabit per second.

-The network uses copper UTP cables. -The network operates at one gigabit per second.

Which of the following are options for connecting a computing device, such as a notebook computer or a tablet, to a cellular network? (Select FOUR.) -Use an integrated cellular antennae to connect the device directly to the cellular network. -Use a USB transmitter to connect the device directly to the cellular network through a satellite. -Use the device's Wi-Fi to connect to the network through a cellular Wi-Fi hot spot. -Use an integrated transmitter to connect the device directly to the cellular network through a satellite. -Use the device's Wi-Fi to connect to the cellular network through a cable modem's Wi-Fi antenna. -Use a USB cable to connect the device to the network through a smartphone. -Use a USB cellular antennae to connect the device directly to the cellular network. -Use a USB cable to connect the device to the cellular network through a cable modem.

-Use an integrated cellular antennae to connect the device directly to the cellular network. -Use the device's Wi-Fi to connect to the network through a cellular Wi-Fi hot spot. -Use a USB cable to connect the device to the network through a smartphone. -Use a USB cellular antennae to connect the device directly to the cellular network.

You have had several employees call the help desk where you work, complaining that they are not able to reach the www.widgets.com server. To help troubleshoot this issue, you decide to run a variety of commands. Which of the following commands is MOST likely to return the IP address of the desired server? (Select THREE). -ipconfig /all -nslookup www.widgets.com -ipconfig www.widgets.com -ipconfig widgets -ping www.widgets.com -tracert www.widgets.com

-nslookup www.widgets.com -ping www.widgets.com -tracert www.widgets.com

A user tells a help desk technician that their browser is displaying a message that a site can't be reached. When asked, the user tells the technician that other users in the same office can browse to the site. The technician suspects that the web server's name is not being translated to the correct IP address. The technician asks the user to open a command prompt window. Which of the following commands would confirm the technician's assumption? (Select TWO). -ifconfig -ipconfig -ping -netdom -nslookup

-ping -nslookup

You work in an office that uses Linux and Windows servers. The network uses the IP protocol. You are sitting at a Windows workstation. An application you are using is unable to connect to a Windows server named FileSrv2. Which of the following commands would work BEST to test network connectivity between your workstation and the server? (Select TWO). -dig -tracert -nslookup -ping -arp

-tracert -ping

Match each port number on the left with its associated protocols on the right. Internet Message Access Protocol (IMAP)

143

The Secure Shell (SSH) protocol uses:

22

Match each port number on the left with its associated protocols on the right. Service Location Protocol (SLP)

427

Match each port number on the left with its associated protocols on the right. HTTP over SSL (HTTPS)

443

Match each port number on the left with its associated protocols on the right. Server Message Block (SMB/CIFS) directly over TCP

445

The following is an example of an IPv6 address: FEC0:1319:7700:F631:446A:5511:CC40:25AB Which part of the example IPv6 address is the interface ID?

446A:5511:CC40:25AB

Match each port number on the left with its associated protocols on the right Apple Filing Protocol (AFP)

548

Match each port number on the left with its associated protocols on the right. Hypertext Transfer Protocol (HTTP)

80

A customer is upgrading the routers and switches in their network. The signal source in these network devices is a light-pulse. Which of the following network cabling options is MOST likely being used in this upgrade? A. Fiber optic B. Twisted pair C. Wireless D. Copper

A.

A group of workers attend a team-building retreat at a remote cabin. They can place calls on their mobile smartphones, but the cabin has no wired phone, television, or wired internet connectivity. The workers need to access an internet webpage using their laptop computers. Which of the following internet connection types might be available to the workers? A. Cellular B. Cable C. DSL D. Dial-up

A.

A host on your network that provides a service that requires the server to always use the same IP address. Which IP addressing method can you use to manually assign the specific IP address? A. Static IP addressing B. Link-local addressing C. Dynamic IP addressing D. APIPA IP addressing E. Alternate IP configuration

A.

A technician connects two network switches using a twisted pair cable. Neither switch supports auto-uplinking. Which of the following identifies the TIA wiring standard required on each end of the cable? A. One end must be T568A, and the other must be T568B. B. Both ends must only be T568A. C. Both ends must only be T568B.

A.

After several new computers are connected to a network device, every computer connected to the device begins to experience slow transfer speeds. Which of the following is the FIRST step in troubleshooting this problem? A. Determine whether the network device is a hub or a switch. B. Use a loopback plug to determine whether each port on the network device is good. C. Use a loopback plug to determine whether the NIC in each computer is good. D. Use a cable tester to determine whether all cables between each computer and the device are good.

A.

An end user clams they are unable to connect to the internet and has called the company's help desk for a solution. Having been assigned to this issue, you decide to first test whether or not TCP/IP is working correctly on the local computer. Which of the following is the BEST command to use for this test? A. ping 127.0.0.1 B. netstat C. nslookup localhost D. ping -a localhost

A.

Given that your Windows workstation has Automatic Private IP Addressing (APIPA) implemented using default settings, which of the following TCP/IP addresses could be automatically assigned to the system should your DHCP server go down or become inaccessible? A. 169.254.1.26 B. 192.168.1.22 C. 10.0.0.65 D. 168.254.10.25 E. 172.16.1.26 F. 169.198.1.23

A.

What device is used to create a physical star topology? A. Switch B. Router C. Bridge D. Repeater

A.

What is a major benefit STP provides that UTP does not? A. Greater resistance to interference B. Ability to install longer cable lengths C. Safer for installations in overhead ceiling spaces D. Lower cost

A.

Which actions allow you to access the internet on your laptop via a cellular network? A. Install a cellular USB adapter in a open port on the laptop. B. Connect the cell phone to the PHONE port on the dial-up modem in your office and connect the laptop to the LINE port on the modem. C. Connect the laptop to the RJ11 jack in your office. D. Connect your wireless access point to the cellular network with a USB dongle and then connect the laptop to the access point using an 802.11b/g/n connection.

A.

Which network component connects a device to the transmission media and allows it to send and receive messages? A. Network interface card B. Bridge C. Protocol D. Switch

A.

Which of the following is a wired networking method most commonly used today by desktop PCs and other network devices to connect to a local area network? A. Ethernet B. 802.11n C. Token Ring D. ArcNet E. Bluetooth

A.

Which of the following is the best definition for a LAN? A. A network in a small geographic area, like in an office. B. An extension of a private network over a shared or public network, such as the internet. A network whose computers and servers are separated geographically, but still connected. The interconnection of components, such as laptops, printers, keyboards, and other wireless devices within a personal range (typically 10 meters or less).

A.

Which of the following terms refers to a network resource sharing model that uses access control lists saved on each computer? A. Peer-to-peer B. Extranet C. Client/server D. Intranet

A.

Which of the following types of internet connection services can allow you to be truly mobile while maintaining your internet connection? A. Cellular B. Wi-Fi C. Satellite D. Mobile hotspot E. ISDN BRI

A.

Which type of network medium is used by an Integrated Services Digital Network (ISDN) adapter? A. Copper telephone wire B. Fiber-optic cable C. Wireless radio waves D. Cable TV coaxial cable E. Infrared light waves

A.

While investigating a network connectivity issue, a technician finds that the link light on a workstation is not lit, and there is no connectivity after replacing the patch cable both between the workstation and the wall jack and between the patch panel and the switch with cables that are known to be good. If the wall jack and patch panel ports are labeled correctly, which of the following tools would the technician MOST likely use next? A. Cable tester B. Crimper C. Punchdown tool D. Tone generator

A.

While setting up a home office, a technician disables the DHCP service on the office router, but does not want to rely on link-local addressing. Which of the following IP addressing methods should be used? A. Static B. APIPA C. Alternate D. Dynamic

A.

You are a software developer, and you are creating a multimedia streaming application. Data will be streamed from your streaming server to streaming clients over IP networks. Which transport protocol should your application use to send data between the clients and the server? A. UDP B. ICMP C. SNMP D.TCP

A.

You are installing a satellite connection so your home office can connect to the internet. Which of the following statements is true? A. The satellite dish must be pointed in the correct direction for communicating with the satellite. B. You must have at the least one available phone line for data uploads. C. The connection between the satellite modem and dish uses a USB cable and connector. D. The connection to your computer from the satellite modem may be RJ11 or F-type.

A.

You are installing networking cable in the air space between the ceiling and the roof of a building. Which type of cabling should you use? A. Plenum B. STP C. PVC D. Multi-mode fiber

A.

You are setting up a small network in your office with one Windows server and 50 Windows workstations. You want to spend as little time as possible configuring the workstations with IP addressing information. What should you do? A. Install and configure the DHCP service on your server. B. Install the DHCP service on each workstation. C. Assign each user an IP address and instruct the user to enter the IP address in his or her computer. D. Install the WINS service on your server.

A.

You are the network administrator of a branch office of your company. The branch office network is part of a WAN that covers most of the United States. Users have been complaining that they are unable to access resources over the WAN at the main headquarters. You suspect that one of the routers between your office and the main headquarters is not working properly. To troubleshoot the routers, which of the following TCP/IP utilities would be BEST to use? A. tracert B. nslookup C. nbtstat D. netstat

A.

You are the network technician for a small company. One of your responsibilities is to ensure that all new hardware is connected and functioning properly. You have several different types of connections that are used for various types of hardware. One of the types of cable available to you is an RJ45 cable. Which of the following BEST describes where this cable would most likely be used? A. Voice over IP connection B. Fax machine connection C. Telephone connection D. Modem connection

A.

You have recently been called to troubleshoot network connectivity problems at a user's workstation. You have found that the network cable runs across high-traffic areas on the floor, causing the cable to wear through and break. You have replaced the cable with a plenum-rated and shielded twisted pair cable. You would like to minimize the problem and prevent it from happening again. Which of the following will BEST protect the cable from further damage? A. Run the cable through the ceiling area instead of across the floor. B. Run the cable under the carpet. C. Periodically check the cable for kinks and wear. Replace the cable when necessary. D. Encase the cable in a protective shield and secure the cable to prevent it from slipping.

A.

You manage a network that has multiple internal subnets. You connect a workstation to the 192.168.1.0 subnet, which uses the default subnet mask. This workstation can communicate with some hosts on the private network, but not with other hosts. You run ipconfig /all and see the following: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . : Broadcom network adapter Physical Address. . . . . . : 00-AA-BB-CC-74-EF DHCP Enabled . . . . . . . : No Autoconfiguration Enabled. . . : Yes IPv4 Address . . . . . . . : 192.168.1.102(Preferred) Subnet Mask. . . . . . . . : 255.255.0.0 Default Gateway . . . . . . : 192.168.1.1 DNS Servers . . . . . . . : 192.168.1.20 192.168.1.27 Which of the following is the MOST likely cause of the problem? A. Incorrect subnet mask B. Incorrect DNS server address C. Incorrect default gateway D. Incorrect IP address

A.

Your network follows the 1000Base-T specifications for Gigabit Ethernet. Which of the following is the MAXIMUM cable segment length allowed? A. 100 meters B. 412 meters C. 500 meters D. 1,000 meters E. 2,000 meters

A.

A Windows workstation is configured to receive its IP configuration information from a DHCP server on the company network. The user at the workstation reports that she cannot use email and is unable to reach the internet. Using the ipconfig command, you see that the workstation has been assigned the following special IP configuration: IP address: 169.254.0.1 Subnet mask: 255.255.0.0 What is this special IP configuration called?

Automatic Private IP Addressing (APIPA)

A healthcare organization provides mobile clinics throughout the world and needs to transfer patients' statistical data to a central database via the internet. Which network technology should you select to ensure network connectivity for any clinic located anywhere in the world, even remote areas? A. DSL B. Satellite C. ISDN D. Cable modem E. Dial-up

B.

A homeowner's connection to the internet is through an always-on modem that connects to existing telephone wiring and has a download speed of over 3 Mbps. The homeowner is able to make analog phone calls over the same wiring at the same time. Which of the following internet connection types is being used? A. Dial-up B. DSL C. ISDN D. Cable

B.

A laptop has a wired connection to the network and is configured with a static IP address. The link light on the NIC is lit, but the laptop can't communicate with any hosts on the local network. Which of the following is the MOST likely cause of the issue? A. The network settings are configured with the wrong gateway address. B. The static IP address and subnet mask are configured with the wrong network address. C. A low RF signal is being sent from the wireless access point. D. Packet collisions are preventing the laptop from sending or receiving network communications.

B.

A technician determines that an older network hub that connects 24 workstations is performing poorly due to excessive network collisions. Which of the following network devices would be the BEST replacement? A. Router B. Switch C. Patch panel D. Bridge

B.

A technician is replacing a cable modem. The cable from the cable company has an inner solid wire conductor and an outer mesh conductor separated by PVC plastic insulation. Which of the following network cable types is being used? A. Straight-through cable B. Coaxial cable C. Twisted pair cable D. Fiber optic cable

B.

A technician must press a cable connector's retaining tab to remove a faulty fiber optic network cable. Which of the following connectors does the cable use? A. RJ11 B. LC C. RJ45 D. ST

B.

As the IT technician for your company, you need to ensure that IP addresses are automatically assigned to hosts while at the same time preventing the same address from being assigned twice. Which of the following services would be BEST to use? A. TCP B. DHCP C. ICMP D. IGMP

B.

Currently, the users in your company are required to use their IP addresses when connecting to other hosts. Since IP addresses are difficult to remember, you want to implement a protocol on your network that allows computers to automatically find another host's IP address using a logical name. Which of the following protocols would be the BEST to implement? A. DHCP B. DNS C. ARP D. Telnet

B.

Examine the following output: 4 22 ms 21 ms 22 ms sttlwa01gr02.bb.ispxy.com [154.11.10.62] 5 39 ms 39 ms 65 ms plalca01gr00.bb.ispxy.com [154.11.12.11] 6 39 ms 39 ms 39 ms Rwest.plalca01gr00.bb.ispxy.com [154.11.3.14] 7 40 ms 39 ms 46 ms svl-core-03.inet.ispxy.net [205.171.205.29] 8 75 ms 117 ms 63 ms dia-core-01.inet.ispxy.net [205.171.142.1] Which command produced this output? A. ping B. tracert C. netstat D. nslookup

B.

How do switches and bridges learn where devices are located on a network? A. When a frame enters a port, the source IP address is copied from the frame header. B.When a frame enters a port, the source MAC address is copied from the frame header. C. When a frame enters a port, the destination IP address is copied from the frame header. D. When a frame enters a port, the destination MAC address is copied from the frame header.

B.

To access the internet through the Publicly Switched Telephone Network (PSTN), what kind of connectivity device must you use? A. DTE B. Modem C. CSU/DSU D. Switch E. TDM

B.

Which connector is used with unshielded twisted pair (UTP) cable? A. BNC B. RJ45 C. DIX D. AUI

B.

Which of the following IP address ranges is reserved for Automatic Private IP Addressing? A. 192.168.0.0 - 192.168.255.254 B. 169.254.0.1 - 169.254.255.254 C. 169.168.0.1 - 169.168.255.255 D. 192.168.0.1 - 192.168.254.255 E. 169.192.0.0 - 169.192.254.255

B.

Which of the following devices allows network communications to be transmitted over existing AC power lines? A. Ethernet multiplexer B. Ethernet over Power C. AC Circuit Switch D. AC-enabled switch E. Power over Ethernet

B.

Which of the following devices can be used to distribute electrical power along with network data on twisted-pair Ethernet cabling (CAT 5 or higher)? A. Ethernet over Power B. Power over Ethernet C. Ethernet multiplexer D. AC-enabled switch E. AC Circuit Router

B.

Which of the following utilities can you use from the command line on a Linux system to see a list of the installed network interfaces along with their current statuses and configurations? A. netconfig B. ifconfig C. netstat D. ipconfig E. netinfo F. iflookup

B.

While investigating a network connectivity issue, a technician finds that the link light on a workstation is not lit, and there is no connectivity after replacing the patch cable with one that is known to be good. The wall jack is not labeled, and within the switch room, none of the cables or patch panel ports are labeled. Which of the following tools would the technician MOST likely use next? A. Punchdown tool B. Tone generator C. Crimper D. Cable tester

B.

You are talking with a customer support technician on the telephone. The technician recommends downloading a particular driver from the internet. When you try to connect to the internet using your dial-up modem, you can't. What is the problem? A. The ISP access number is incorrect. B. You need to hang up. C. You need to disable call waiting. D. You need to install and configure TCP/IP.

B.

You are troubleshooting connectivity between your computer and the www.widgets.com server, whose IP address is 192.168.1.1. Which of the following commands tests connectivity to the device as well as name resolution? A. nslookup 192.168.1.1 B. ping www.widgets.com C. nslookup www.widgets.com D. ping 192.168.1.1

B.

You have a user who takes his laptop home every day after work. When he's working in the office, the laptop must get an IP address from the DHCP server so you configure it to obtain IP and DNS information automatically. When he's working from home, the laptop must use IP and DNS information that connects with his home network. Which IP addressing method can you use to make sure he gets a network connection at home? A. Link-local addressing B. Alternate IP configuration C. Dynamic IP addressing D. APIPA IP addressing E. Static IP addressing

B.

You have been asked to implement a network infrastructure that will accommodate failed connections. Which of the following network topologies provides redundancy for a failed link? A. Ring B. Mesh C. Star D. Bus

B.

You have just signed up for a broadband home internet service that uses coaxial cable. Which connector type will you most likely use? A. BNC B. F-type C. ST D. RJ11 E. RJ45

B.

You manage a network that has multiple internal subnets. You connect a workstation to the 192.168.1.0 subnet using the default subnet mask. This workstation can communicate with some hosts on the private network, but not with other hosts. You run ipconfig /all and see the following: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . : Broadcom network adapter Physical Address. . . . . . : 00-AA-BB-CC-74-EF DHCP Enabled . . . . . . . : No Autoconfiguration Enabled. . . : Yes IPv4 Address . . . . . . . : 192.168.1.102(Preferred) Subnet Mask . . . . . . . : 255.255.255.0 Default Gateway. . . . . . . . . : 192.168.2.1 DNS Servers. . . . . . . . . . . : 192.168.2.20 Which of the following is the MOST likely cause of the problem? A. Incorrect DNS server address B. Incorrect default gateway C. Incorrect IP address D. Incorrect subnet mask

B.

You want to use your Windows workstation to browse the websites on the internet. You use a broadband DSL connection to access the internet. Which network protocol must be installed on your workstation to do this? A. IPX/SPX B. IP C. PPP D. NetBIOS E. SLIP

B.

Can be used to connect wireless clients to wired clients on the same network.

Bridge

A SOHO's connection to the internet is through an antenna that sends and receives a microwave signal to the ISP's antenna. There can be no obstacles on the direct path between the two antennae. Which of the following internet connection types is being used? A. Fiber B. Satellite C. Line-of-sight wireless D. DSL

C.

A group of workers in an office space communicate with each other on their smartphones and tablet devices through an ad hoc network linked using Bluetooth technology protocols. Which of the following network types is in use? A. Local Area Network (LAN) B. Metropolitan Area Network (MAN) C. Personal Area Network (PAN) D. Wide Area Network (WAN)

C.

A laptop has a wired connection to the network and is configured with a static IP address. The link light on the NIC is lit, but the laptop can't communicate with any hosts on the local network. Which of the following is the MOST likely cause of the issue? A. The network settings are configured with the wrong gateway address. B. Packet collisions are preventing the laptop from sending or receiving network communications. C. The IP address conflicts with another host on the local network. D. The laptop is connected to a hub instead of a switch.

C.

A medical center wants to upgrade their network backbone to 10-Gigabit Ethernet (10 Gbps) so they can perform daily backups of large amounts of data to the secure on-site storage area network (SAN) without bogging down the network. Some of the backbone segments will have to reach between buildings that are close to 300 meters apart. Which of the following cable types BEST supports the 10-Gigabit Ethernet at the necessary segments lengths while keeping costs as low as possible? A. Twisted pair Category 6 B. Twisted pair Category 7 C. Multimode fiber optic D. Single-mode fiber optic

C.

A technician is installing a cable modem that supplies internet connectivity for a home office. Which of the following cabling types would be used to connect the cable modem to the cable wall outlet? A. Multimode fiber B. CAT 5e C. RG6 D. CAT 6a

C.

A user reports that he can't browse to a specific website on the internet. From his computer, you find that a ping test to the Web server succeeds. A traceroute test shows 17 hops to the destination web server. What is the most likely cause of the problem? A. Incorrect default gateway address B. Duplicate IP addresses C. Incorrect DNS server address D. Incorrect subnet mask value

C.

An 8-port switch receives a frame on port number 1. The frame is addressed to an unknown device. What will the switch do? A. Send the frame out all 8 ports. B. Drop the frame. C. Send the frame out ports 2-8. D. Send the frame out the destination port.

C.

Examine the following output: Server: helicuplar.xct.takro.net Address: 209.53.4.130 Name: westsim.com Address: 64.78.193.84 Which command produced this output? A. tracert B. netstat C. nslookup D. ipconfig

C.

Which TCP/IP configuration parameter identifies the router that is used to reach hosts on remote networks? A. WINS server address B. Hostname C. Default gateway D. Alternate IP address E. DNS server address F. Subnet mask

C.

Which of the following describes the part of the IPv6 address that identifies the subnet address? A. The last quartet in the IPv6 address interface ID. B. The first quartet in the IPv6 address prefix. C. The last quartet in the IPv6 address prefix. D. The first quartet in the IPv6 address interface ID.

C.

Which of the following devices can be used to distribute electrical power along with network data on twisted-pair Ethernet cabling (CAT 5 or higher)? A. Ethernet multiplexer B. AC-enabled switch C. Power over Ethernet D. Ethernet over Power E. AC Circuit Router

C.

Which of the following hardware devices regenerates a signal out all connected ports without examining the frame or packet contents? A. Switch B. Bridge C. Hub D. Gateway E. Router

C.

Which of the following protocols carry phone calls over an IP-based network? A. TCP B. RTSP C. VoIP D. HTTP

C.

Which of the following topologies connects each network device to a central hub? A. Ring B. Mesh C. Star D. Bus

C.

Which type of fiber optic cable supports 10 Gigabit Ethernet with a maximum segment length of up to 40 km? A. 10GBaseLR single-mode B. 10GBaseSR multimode C. 10GBaseER single-mode D. 10GBaseT twisted pair Category 7

C.

Which type of fiber optic cable supports 10 Gigabit Ethernet with a maximum segment length of up to 40 km? A. 10GBaseSR multimode B. 10GBaseT twisted pair Category 7 C. 10GBaseER single-mode D. 10GBaseLR single-mode

C.

While sorting through a box of cables in your storage room, you find one that matches the configuration shown in the image. Which of the following BEST describes the type of cable configuration and the purpose for which it would be used? A. Patch (or straight-though) cable configuration used to connect computers to network devices, such as switches and hubs. B. RJ11 configuration used to connect wireless routers to phone line connections. C. Crossover cable configuration used to connect computers directly to one another for networking. D. Rollover cable configuration used to connect computers to routers for console management.

C.

While working on a Windows workstation, you've enabled Remote Desktop. Which of the following ports MUST be opened in the server's firewall to allow remote clients to access the desktop? A. 123 B. 389 C. 3389 D. 110

C.

You are troubleshooting network connectivity issues on a Windows workstation. Which command would you use to view the MAC address of the network adapter? A. ping B. netstat C. ipconfig /all D. nslookup E. ipconfig

C.

You have a network that uses a logical bus topology. How do messages travel through the network? A. Messages travel from one device to the next until they reach the destination device. B. Messages are sent directly to the correct destination device. C. Messages are broadcast to all devices connected to the network. D. Messages are sent to a central device, which then forwards the message to the destination device.

C.

You have just signed up for a broadband home internet service that uses coaxial cable. Which connector type will you most likely use? A. BNC B. RJ45 C. F-type D. RJ11 E. ST

C.

You want to implement name resolution on the Linux workstations in your company. Which protocol will you use to do this? A. LMHOSTS file B. WINS C. DNS D. NTP E. SMTP

C.

You've just installed the DNS service on a Windows server. Which port must be opened in the server's firewall to allow clients to access the service? A. 143 B. 110 C. 53 D. 123

C.

A medical center wants to upgrade their network backbone to 10-Gigabit Ethernet (10 Gbps) so they can perform daily backups of large amounts of data to the secure on-site storage area network (SAN) without bogging down the network. Some of the backbone segments will have to reach between buildings that are close to 300 meters apart. Which of the following cable types BEST supports the 10-Gigabit Ethernet at the necessary segments lengths while keeping costs as low as possible? A. Twisted pair Category 6 B. Twisted pair Category 7 C. Single-mode fiber optic D. Multimode fiber optic

D.

A technician is running a network above a dropped ceiling that is also used for ventilation. The cable must be twisted pair and must be capable of Gigabit Ethernet speeds. Which of the following cables should be used? A. Plenum-rated multimode fiber B. Riser-rated RG-58 C. Riser-rated CAT-5e D. Plenum-rated CAT-6a

D.

A technician located at a branch office can't communicate with a company server at the home office. Which of the following commands could be used to determine where the communication is blocked? A. ipconfig B. ping C. nslookup D. tracert

D.

A user is having problems connecting to other computers using hostnames. Which of the following commands will BEST help you troubleshoot this problem? A. arp B. nbtstat C. netstat D. nslookup

D.

Nate, an employee in your organization, has started to work from home two days a week. Nate uses the same company laptop while working in the office and working at home. Nate's laptop automatically connects to the wireless network in the office, but does not automatically connect to his home wireless network. Nate would like the laptop to connect automatically at home and at work. Which of the following would BEST allows this to happen? A. Configure automatic private IPv4 addressing. B. Configure a static IP address that works for both the office and the home wireless networks. C. Configure a static IP address for the general TCP/IP configuration that is compatible with the office network and another static IP address for the alternate TCP/IPv4 configuration that is compatible with the home network. D. Configure an alternate TCP/IP configuration on the laptop's wireless adapter to use a static IP address that is compatible with the home network.

D.

To assist a user, a help desk technician is able to take advantage of a Windows proprietary network protocol that allows the technician to open a graphical interface to connect with the user's Windows computer. Which of the following TCP/IP port numbers is the default port used by this protocol? A. 80 B. 143 C. 443 D. 3389

D.

Which kind of connector do you use to connect a modem to a standard telephone line? A. F-type B. RJ45 C. RG58 D. RJ11

D.

Which of the following best describes how a switch functions? A. It connects multiple segments of different architectures. It translates frames and broadcasts them to all of its ports. B. It connects multiple cable segments or devices and broadcasts frames to all of its ports. C. It connects multiple segments of different architectures. It translates frames and forwards them to the appropriate segment. D. It connects multiple cable segments or devices and forwards frames to the appropriate segment.

D.

Which of the following is a valid MAC address? A. 73-99-12-61-15 B. 83-5A-5B-0B-31-55-F1 C. 34-9A-86-1G-B3-24 D. C0-34-FF-15-01-8E E. 192.168.12.15 F. 255.255.255.0

D.

Which of the following is a wired networking method most commonly used today by desktop PCs and other network devices to connect to a local area network? A. 802.11n B. Token Ring C. Bluetooth D. Ethernet E. ArcNet

D.

Which of the following network technologies is packaged as part of a BRI plan? A. DSL B. Dial-up C. Cable modem D. ISDN

D.

Which of the following protocols is used by an email client to retrieve messages from an email server and gives users the option to keep mail messages on the server? A. NTP B. SMTP C. POP3 D. IMAP

D.

Which utility would you use to view current connections and active sessions and ports on a computer? A.ping B. ipconfig C. nslookup D. netstat

D.

While making an online bank transaction, a customer checks to see that the web browser is displaying a lock icon that indicates that an encrypted TCP/IP suite protocol is being used. Which of the following TCP/IP port numbers does this protocol typically use when the browser encrypts its communications with the bank's web server? A. 25 B. 80 C. 143 D. 443

D.

You are using a crimper to attach an RJ45 connector to a Cat 6 UTP cable. You need to use the T568A standard to connect the individual wires to the connector. Which wire should be connected to pin 1? A. Green B. Orange with white C. Blue D. Green with white

D.

You have a computer with an onboard LAN adapter. The LAN adapter has failed, and you are unable to connect the computer to the network. What should you do? A. Clear the CMOS settings. B. Add a network card using an AGP slot. C. Replace the motherboard. D. Add a network card using a PCI slot.

D.

You have a network that uses a logical ring topology. How do messages travel through the network? A. Messages are sent to a central device, which then forwards the message to the destination device. B. Messages are sent to all devices connected to the network. C. Messages are sent directly to the destination device only. D. Messages travel from one device to the next until they reach the destination device.

D.

You have just connected a new computer to your network. The network uses static IP addressing. You find that the computer can communicate with hosts on the same subnet, but not with hosts on a different subnet. No other computers are having a problem. Which of the configuration values would you most likely need to change? A. Subnet mask B. IP address C. DNS server D. Default gateway

D.

You want to allow your users to download files from a server running the IP protocol. You want to protect access to the files by requiring user authentication to access specific directories on the server. Which IP protocol should you implement to provide this capability? A. SSH B. TFTP C. SNMP D. FTP E. SMTP F. LDAP

D.

Which of the following devices allows network communications to be transmitted over existing AC power lines? A. Ethernet multiplexer B. Power over Ethernet C. AC Circuit Switch D. AC-enabled switch E. Ethernet over Power

E.

Which of the following is a valid IPv6 address? A. FEC0:AB04:899A B. FEC0:AB98::A7::9845:4567 C. 199.12.254.11 D.FEC0:9087:AB04:9900:7GA2:7788:CEDF:349A E. FEC0::AB:9007

E.

Which protocol is used to send email messages from a mail client to a mail server? A. POP3 B. FTP C. IMAP D. SNMP E. SMTP

E.

You are an IT technician for your company and would like to be able to: Establish a remote server management session. Send unencrypted (clear text) transmissions to the remote server. Manage specialized industrial and scientific devices. Which of the following utilities would be the BEST to use to accomplish these tasks? A. SSH B. xterm C. RUMBA D. PuTTY E. Telnet

E.

You have implemented an ad hoc wireless network that doesn't employ a wireless access point. Every wireless network card can communicate directly with any other wireless network card on the network. What type of physical network topology has been implemented in this type of network? A. Star B. Ring C. Bus D. Tree E. Mesh

E.

The following is an example of an IPv6 address: FEC0:1319:7700:F631:446A:5511:CC40:25AB Which quartet in the example IPv6 prefix is used to identify the subnet?

F631

The following is an example of an IPv6 address: FEC0:1319:7700:F631:446A:5511:CC40:25AB Which part of the example IPv6 address is the prefix?

FEC0:1319:7700:F631

Connects segments on the same subnet. Repeats signals out to all other ports.

Hub

Operates in half-duplex mode, meaning devices can either send or receive data at any given time.

Hub

A network in a small geographic area that typically uses wires to connect systems together

Local Area Network LAN

A set of subnets connected to each other, typically by wires, using at least one router.

Local Area Network LAN

A network that covers an area as small as a few city blocks to as large as an entire city.

Metropolitan Area Network MAN

A network that is typically owned and managed by a city as a public utility.

Metropolitan Area Network MAN

Cable lengths are limited in distance.

Multimode

Data transfers through the core using more than one light rays.

Multimode

A small network used for connecting devices, such as a notebook computer, a wireless headset, a wireless printer, and a smartphone

Personal Area Network PAN

Connects two network segments that have different subnet addresses.

Router

Uses the IP address within a packet to move packets between networks.

Router

What is name of the utility that is (1 similar to Telnet and (2 used to establish a secure remote server management session?

SSH

Cable lengths can extend a great distance.

Single Mode

The core diameter is around 10 microns.

Single Mode

Connects segments on the same subnet. Forwards signals to only the port connected to the destination device.

Switch

Operates in full-duplex mode, meaning devices can both send and receive data at the same time.

Switch

A Windows workstation is configured to receive its IP configuration information from a DHCP server on the company network. The user at the workstation reports that she cannot use email and is unable to reach the internet. Using the ipconfig command, you see that the workstation has been assigned the following special IP configuration: IP address: 169.254.0.1 Subnet mask: 255.255.0.0 Why did the workstation receive this type of configuration?

Why did the workstation receive this type of configuration?

A group of networks that are geographically isolated, but are connected to form a large internetwork.

Wide Area Network WAN

Similar to a standard LAN, but uses radio signals instead of wires to connect systems together.

Wireless Local Area Network WLAN

You need to view detailed IP configuration information on Windows workstation. In addition to the IP address, subnet mask, and default gateway configuration, you need to see the network card's MAC address and the addresses of the DHCP and DNS servers the workstation is communicating with. What command would you enter at the command line to see this detailed information?

ipconfig /all

When you see the address of the DNS server, you realize that this information needs to be updated. Earlier in the day, you implemented a new DNS server with a new IP address. The workstation will update this information in 24 hours. What command can you enter at the command line to update the DNS server information right away?

ipconfig /flushdns

You are the computer specialist in a small business. Your company server is named FS1 and has an IP address of 10.0.0.2. The hardware in your company server started to experience intermittent failures, so you transferred the shares on the server to a spare server and took the main server offline. The spare server has an IP address of 10.0.0.3. You edit the existing A record for FS1 on your company's DNS server and redirect the hostname to the spare server's IP address of 10.0.0.3. Afterward, most users are able to access the shares on the spare server by hostname, but several users cannot. Instead, they see an error message indicating that the FS1 server could not be found. Enter the command you can run from the command prompt on these workstations that will allow them to access the shares on FS1 without performing a full restart.

ipconfig /flushdns

Displays active sessions, ports, sockets, and the local routing table.

netstat

Displays current connections and incoming and outgoing connections.

netstat

Resolves (looks up) the IP address of the specified hostname.

nslookup

A few simple replies to this request from the remote host indicates that a connection exists between sender and receiver.

ping

Performs a continuous connection test when used with the -t option.

ping

Sends an ICMP echo request/reply packet to a remote host.

ping

Tests connectivity between devices and shows the routers in the path between the two devices.

tracert


संबंधित स्टडी सेट्स

5. Field Underwriting Procedures

View Set

Abeka: Science Earth and Space Quiz 21

View Set

Chapter 4 Financial Services: Servings Plans and Payment Accounts

View Set

What is the long term effect of the Crusades?

View Set

CH 14: Preoperative Nursing Management

View Set

White Fang Comprehension Chapters 4 - 7

View Set

Psychology Ch.1: Psychological Foundations

View Set