CM final exam donald
A public project has less governmental involvement than a private project.
F
A short-interval schedule is not the same as a look-ahead schedule.
F
A system evaluation does not include employee interviews.
F
An ethics program does not start with upper management.
F
An overcrowded worksite does not affect productivity.
F
Archeological findings are not a risk of the contractor.
F
Bullet points are always effective as a presentation format.
F
Comparing actual job costs to estimated costs is not risk management.
F
Construction actually has little to no effects on the environment and thereby, does not affect global warming.
F
Enhancing indoor environmental quality is not one of the six fundamental principles of sustainable building design.
F
Fiscal considerations should not enter into the reason for a safety program.
F
It is the obligation of the owner to provide job site security.
F
Local government is seldom, if ever, involved in construction projects.
F
Meeting minutes are unnecessary if it is a meeting of the owner's construction representative and the superintendent. Select one:
F
PPE stands for protecting people every time.
F
Platinum is the lowest level of LEED certification.
F
Productivity is the most predictable element of project planning and project control.
F
Proper tools and equipment is not a safety consideration.
F
Purchase orders and material invoices do not need to be monitored during the contract.
F
Quality impacts aesthetics, appearance, and durability, but not performance.
F
Safety should only be value-based (and not rules based).
F
Scheduling and coordinating material deliveries is not one of the contractor's tasks.
F
Sequencing of activities is not the same as network logic.
F
Social obligations are not a reason for a robust safety program.
F
Speeding is unethical.
F
Subcontracting work is not a risk mitigation strategy
F
Subcontractors and suppliers should not be involved is a risk evaluation.
F
Subcontractors should not be pre-qualified.
F
Successful subcontractor coordination is not based on proper scheduling, preparation, and planning.
F
Sustainability does not involve using standard sizes of materials.
F
Sustainability has to do with a small part of an entire life cycle.
F
Sustainability is an unexpected mainstream design and construction deliverable
F
Sustainability is an unexpected mainstream design and construction deliverable.
F
The survey found no discrepancy between the value people place on ethics and what they actually do in practice to support their values.
F
The three types of activities that must be planned and included in a schedule are: pre-construction, construction operations, and post-construction.
F
There is no need for the construction industry to consider implementing the concept of sustainability of sustainable development.
F
Universal Education is a goal of Sustainable Development Goals (SDGs).
F
Very little that comes out of the construction site is recyclable.
F
Waste is a relatively minor issue in construction.
F
A BIM design begins with intelligent objects such as walls, roof, and windows
T
An OSHA visit may be caused by an employee complaint.
T
An activity is a task, function, or decision that has a time commitment, or duration, associated with it.
T
An inspection is a check used when tracking quality.
T
An objective of sustainability is to reduce consumption of nonrenewable resources, to minimize waste, and to create better environments.
T
Animation without a purpose is a distraction.
T
BIM helps with consideration of alternative approaches to design and construction.
T
Back charges may be used to encourage subcontractors to clean up after themselves.
T
Cite whenever it isn't your original work, including graphics
T
Clash detection allows for the effective identification, inspection, and reporting of unintended interferences of materials and systems.
T
Commercial projects are typically designed by architects, sometimes with support of various specialty engineers.
T
Computer applications for the construction industry includes programs for estimating, scheduling, and cost control.
T
Contracting with the subcontractors is part of quality assurance.
T
Cost codes are used to compare actual job costs with the estimated job costs.
T
Critical path method (CPM) is the most common type of schedule used in the commercial, civil, and industrial construction industry.
T
Delivery tickets are one of the sources of information used to track job performance.
T
Each activity in the budget is assigned a cost code.
T
Elimination of a risk may cause disengagement.
T
Employees should be involved in the development of a company safety manual.
T
Enhancing energy efficiency and use of renewable energy sources are the best strategies to achieve an NZE building.
T
Environmental risks may delay a schedule.
T
Ethics may include the virtues of loyalty, honesty, and responsibility.
T
Evaluation of a project includes determining what worked and what didn't work.
T
Everyone in a group should review every part of a report. TERM ENGLISH
T
Everything CM's do is tied to the plans and specs.
T
In sustainable decision-making, the factors impacting the entire life of the project should be considered.
T
Indirect costs of injuries can be more than direct costs.
T
Optimizing energy use is one of the six fundamental principles of sustainable building design.
T
Part of network logic is answering the question: Which activities can be started once this activity is completed?
T
Planning and scheduling concern two interrelated elements of construction management: strategy and time.
T
Political, legal, and regulatory risks are the ones over which the contractor has the least control.
T
Pollutant levels indoor are often higher than pollutant levels outdoor.
T
ProCore is a comprehensive project management platform that enables the entire project team to access and participate in every type of construction application from a centralized hub.
T
Productivity has to do with how much work can be accomplished in a certain time frame.
T
Programmable thermostats are an example of how energy consumption can be optimized.
T
Quality attitude must emanate from the highest levels of leadership and management.
T
Quality control is only done during a construction project.
T
Quality is defined as meeting or exceeding the requirements established in the design documents.
T
Risk retention is a mitigation strategy.
T
SEE stands for significant emotional event.
T
Some production activities do not actually require any physical effort.
T
Summary schedules group activities under broader headings such as mobilization, site work, foundation, and rough framing.
T
TQM stands for Total Quality Management.
T
Taking corrective action is called crashing the schedule.
T
The LEED rating system was developed by U.S. Green Building Council (USGBC). Select one:
T
The actual term of "sustainable development" expressed in the World Conservation Strategy meeting in 1980 for the first time.
T
The benefits of sustainable design and construction offer the potential to change the way in which we, as humans, face the challenges of the next decade.
T
The fourth dimension of BIM is scheduling.
T
The goal of sustainability is to reduce the impacts construction has on buildings being built, and the environment, quality of life, and human health.
T
The tracking tool for cost is the estimate.
T
There are nearly 800,000 private construction companies in the U.S. employing nearly 6.7 million people, or an average of just over eight employees per company.
T
There are programs available that integrate estimating, accounting, and contract administration functions into a single program.
T
A zero-punch list should not be a goal of the project.
F
While BIM is a verb, VDC is a noun.
F
Exposure is what makes a hazard a risk.
T
The biggest disadvantage to Gantt charts is that they show the interrelationship among the activities.
F
The construction industry accounts for approximately 43% of the U.S. gross domestic product.
F
The financial strength of a subcontractor is not a risk of the prime contractor.
F
The financial strength of the owner is not a risk of the prime contractoR
F
The financial strength of the owner is not a risk of the prime contractor.
F
The gas that was absent in the Mississippi oilfield explosion was nitrogen.
F
The main assertion of a slide should always be in the bottom left corner of the slide.
F
The order to follow when writing is drafting, prewriting, and polishing.
F
The tracking tool for quality is the schedule.
F
Avoid wordiness.
T
Use of subcontractors is considered as more efficient and expert than self-performance by the contractor.
T
Weather is probably the most common and most obvious reason for work slowdown.
T
With BIM the various stages of design are classified as level of development (LOD).
T
With BIM you get a chance to build the project in a virtual environment before you build it for real.
T
"OWL" is the Online Writing Lab at LSU
F
An ethical issue can be decided by doing a survey.
F
A BIM model serves as a shared knowledge resource for the entire design and build team.
T
A clean site is a safe site.
T
A network diagram is nothing more than a work plan
T
Part of being a construction manager is anticipating risks.
T
The major cornerstone for the ecological movement was the publication of Silent Spring by Rachel Carson in the early 1960s.
T
Labor availability is not a contractor risk.
F
A BIM model cannot perform clash detection before the project does to the field.
F
A preparatory inspection is unnecessary to avoid miscues and rework.
F
A project debriefing is not meant to be a training mechanism.
F
A risk mitigation plan happens before construction starts and does not vary thereafter.
F
Architects deal with the systems of a building design.
F
Assigning durations to each activity precedes sequencing.
F
Availability of materials is not a contractor risk.
F
BIM cannot be accommodating to facility management.
F
BIM does not help a contractor coordinate subcontractors.
F
BIM will not allow collaboration among students from the different design-build disciplines.
F
Budget is not a factor to be considered when setting the quality standard.
F
Construction is big business, reaching $10.6 billion in world-wide spending in 2017.
F
Cost overruns do not need to be addressed until the project is completed.
F
Detailed schedules do not break major work activities down into smaller tasks.
F
Each time number in a network diagram represents a calendar day, not a work day.
F
Eco-friendly building materials may be obtained from anywhere in the world.
F
Elimination is not an example of engineering controls.
F
Fossil fuels are considered a renewable source of energy.
F
Gray water is the same as drinking water.
F
If you are only a user of BIM, and not a designer, you do not need to know anything about BIM.
F
Industrial is the largest energy consumer.
F
It does not make sense to do much upfront planning of the BIM model.
F
NZE building is a theoretical concept, and there is no application in the real world.
F
OSHA was created in 1950.
F
PPE stands for personal protection engineering.
F
Sustainability is the fifth dimension of BIM.
F
The bid amount is converted to a project budget.
F
A BIM model is a 3D representation of the physical and functional characteristics of a building.
T
A clear expression of employee concern should be a policy component of a safety manual.
T
A comprehensive quality control plan is the best way to control quality during construction.
T
A good win-win example is using recycled concrete as a base material for new roadways or driveways.
T
A network diagram is nothing more than a work plan.
T
A tailgate meeting to review safety procedures is risk management.
T
Acceptance is "polite" society usually requires an ethics code that is also acceptable.
T
According to the Brundtland definition of sustainable development, a sustainable society meets the needs of the present without compromising the ability of future generations to meet their own needs.
T
Adding contingencies may be a pre-bid method to offset a risk.
T
Additional time should always be asked for when processing a change order.
T
Administrative activities include permitting, submittals, inspections, and testing.
T
Job signage is a good way to advertise the construction company.
T
Jobsite tablets have made it a lot easier for field personnel to manage every aspect of project coordination in real time
T
Keeping accurate labor records is one of the most important functions of CM's in the field.
T
LEED is Leadership in Energy and Environmental Design.
T
LEED stands for Leadership on Energy and Environmental Design.
T
Labor costs are directly impacted by a construction company's safety record.
T
Project size may impact what type of schedule will be used.
T
Quality and safety are ultimately achieved at the labor force level.
T
Quality assurance is done prior to a project being started.
T
The big advantage to Gantt chart schedules is that they are very easy to understand.
T
The correct tools and equipment are necessary for workers to get the job right the first time.
T
The distributed repository approach is the path most contractors use to implement their BIM activities.
T
The first goal of quality management is to get things done right the first time.
T
The ultimate goal of jobsite management is to keep the project on schedule, within budget, and of high quality.
T
The use of sustainable technologies and practices creates new employment opportunities.
T
There are actually wood building materials that may be certified.
T
There are indirect costs that may be saved by having a safety program.
T
Total float is the amount of time an activity can be delayed before it impacts the project's completion as planned.
T
Triple Bottom Line performance involves economic, environmental, and social performances.
T
Unethical policies can damage the image of a company and destroy employee morale.
T
Unsafe behaviors cause more safety problems than unsafe conditions.
T
Submittal of shop drawings is part of quality assurance.
F
Environmental, Economic, Social are three main benefits that result from sustainable design and construction.
T
Establishing the work hours is the responsibility of the superintendent.
T
Ethics are the moral standards used by people in making personal and business decisions.
T
Excellent (S), Very good (A), Good (B+), Fairly poor (B - ), and poor (C) is the rating categories for the LEED rating system.
T
Great buildings are usually identified with the designers, not the constructors.
T
Hard hats and steel-toed shoes are examples of PPE
T
Hiring the right people can facilitate an ethics program.
T
Identifying performance deviations is one of the seven steps in the project control cycle.
T
It is important to develop a standardized risk assessment approach that can be applied to each project.
T
Most budget problems originate from inaccurate labor estimates.
T
One definition of "sustainable' is meeting the needs of the present without compromising the ability of future generations to meet their own needs.
T
One of the reasons for a toolbox meeting is to emphasize safe work habits
T
One of the reasons for a toolbox meeting is to emphasize safe work habits.
T
One of the reasons for subcontractor meetings is to discuss potential conflicts.
T
One of the results of a robust safety program is that workers believe they have a right to a safe workplace
T
One of the things the owner is accountable for is creating the overall budget for the project.
T
Polishing is made up of revising and editing.
T
Quality, along with cost and time, are the three primary elements of construction management.
T
RFI logs should be kept throughout the project.
T
Residential construction is typically funded by individuals for its own use or for sale.
T
Risk abatement involves reducing the loss potential of a risk.
T
Risk evaluation is subjective.
T
Risk management involves identification, quantification, and mitigation of the risks.
T
Political is a pillar of sustainability, according to the Triple Bottom Line.
F
Predicting durations is an exact science.
F
Safety training addresses the issue of why the need for robust safety plans.
F
Plagiarism is a legal issue.
F