Collision Repair Safety Assessment || 10/24

Long hair, loose clothing, jewelry, and long sleeves need what kind of attention?

All clothing must be tucked in or rolled back. Loose jewelry must be removed, and long hair tied back.

When should eye protection be worn?

At all times when in shop

True or False: Once the metal is no longer bright orange from welding, it is cool enough to pick up with your hands.

False

True or False: Since you weld with a welding helmet that has a dark safety glass lens, you do not need regular safety glasses or goggles.

False

It is dangerous to use hammer with a loose handle because the hammer head may____________________

Fly off

Paint, enamel, lacquer or solvents must not be used near flames or sparks because they are __________________

Ignitable

Before using any power machine, for the first time you must, get the permission of your _____________________

Instructor

When disconnecting portable power tools from a power receptacle, you should?

Pull on the plug end, and not on the cord.

"Forcing" your work into a machine means that you are ____________ it too hard

Pushing

Explain what you should do if you find a tool that is broken.

Report it to instructor and do not use.

Explain what you should do in the event of an accident.

Report it to instructor, call 911 if necessary.

If you find a power tool with a damaged power cord or with a switch that does not work, what should you do?

Report the condition to the instructor immediately so the tool can be locked up until it is repaired.

Explain why the sheet metal pictured on top of this table is a safety concern. (Photo with sheet metal poking out).

Someone could be cut when walking by.

An 'Operator zone' refers to:

The area of the shop floor were the machine operator should only stand.

Explain why oily rags or rags soaked in paint and other solvents must be stored in a metal air-tight container when not in use.

They are highly flammable.

Explain why great care must be taken when handling all metal around a welding and grinding area, not just your own project.

They can be sharp and hot.

True or False: Hot metal thrown into water in order to cool it off can create steam hot enough to burn skin.

True

True or False: Ultraviolet (UV) light from the welding arc can cause sunburned skin.

True

True or False: Wearing gloves and aprons can help sparks and hot metal from touching your skin.

True