Engineering Final 111
Describe the procedure to perform an Interfence Analysis in an assembly
1. Drive constraint 2. Expand dialog box, check collision detection, than drive constraint
List three differences between parametric modeling and traditional 2d
2D is Auto Cad Parametric is 3D 2D is size before shape parametric is shape before size one is 2d, parametric is 2d 2D has no relationship between features Parametric has relationship between features.
What are the advantages and disadvantages of creating fillets using the 3D fillets command and creating fillets using in 2D profiles?
3D fillet can be put on any edge, more feature 2D fillet depend on the profile and the last feature.
Describe the elements required in creating a Swept feature
A profile and a pass
What are the dimensions for D size drawing?
A. 9.5x11 B. 11x17 C. 17x22 D. 22x34
List 3 boolean operations
AUB-To Join A(upside down U) B- To intersect A-B- To Cut
List and describe three methods to know that a sketch is fully constrained.
Auto constrain is set to zero Bottom right corner shows fully constrained Lines will be purple color
What is the BORN Technique
Base Orphan Reference Node ( Feature without parent node)
List three methods to add center lines
Bisector Center Line Circular Pattern
What does CAD Stand for and what is the two major areas for CAD
CAD- Computer Aided Design Computer Geometric Modeling Computer Aided Drafting
List three symmetrical features in Inventor.
Circular Pattern Mirror Revolve
How do you save the Inventor simulation as an AVI,WMV?
Click record
What does CSG stand for?
Constructive Solid Geometry
Keeping the History Tree in mind, what is the difference between a cut with a pattern and cut each one individually?
Cut with pattern get one feature Cut individually gets multiple features
List 4 types of file extension in Inventor
DWG. IPT. IAM. IPN.
In Inventor, describe the procedure to create Bill of Materials (BOM)
Define table style, place by parts list
How do we distinguish from derived dimensions and regular dimensions
Derived cannot be modified and regular can be modified.
What is the main difference between dimensional constraints and geometric constraints
Dimensional controls size, geometric controls shape.
How do we end the edit mode and return to the assembly model in Autodesk Inventor
Double click assembly in browser or click return
What is the difference between feature dimension and reference dimension
Feature dimension can be retrieved and modified Reference dimension cannot be modified.
What information is available through the Interference Analysis in Inventor
Location of crash Volume of crash
Describe the difference between Mate constraint and Flush constraint
Mate is face to face Flush point to same direction
List three commonly used ASSEMBLY CONTRAINTS
Mate, Tangent, Angle
What is the 4 types of Assembly drawings
Outline Assembly Section Assembly Pictorial Assembly Explode Pictorial Assembly
Describe 3 methods to modify dimensions
Parametric table Double Click Right click, show dimension
How should we determine the assembly order of different parts in an assembly
Place base first
How do you access the Drive Constraint command
Right click on constraint, click drive
How to change to a different Title Block in Drawing mode
Right click, delete, insert new one
How do we adjust the information listed in the parts list of and assembly drawing?
Right click, edit parts list
What is the main difference between a rough sketch and a profile
Rough sketch is random lines Profile is an enclosed shape with no gap or intersection
Describe the difference between a section view and projected view
Section view is looking interior Projected view is looking outside
Describe the steps used to create the Shell feature in the lesson.
Select shell command, select solid, remove face, define thickness,
What is included in AutoDesk Content Center
Standard Parts
What is the difference between Sweep and Extrude
Sweep is profile along a pass Extrude is profile along straight line
What is the usage of 3D grips?
To edit parts
Describe the purpose of auxiliary views in 2D drawings.
To show the true size and true shape of an inclined surface, which is not parallel to any principle view.
List and name of 3 contraints in toolbar in inventor
Vertical, Horizontal, Equal
When do you need a suppressed feature in a model? How do you identify a surpassed feature in model?
When we need to have more than one design feature. Feature is grayed out Feature is removed from front view Line stretched threw.
Can we access the 2D sketch of a part in an assembly?
Yes, right click the feature in the edit mode
In an assembly, can we place more than one copy of a part? How is it done?
Yes, with multiple clicks
What is the purpose of using ASSEMBLY CONSTAINTS
build relationship between componets
How do we edit mode in an assembly model?
double click part
How do we modify the Pattern parameters after the model is built
right click, edit feature
