Go/NoGo Gauges

अब Quizwiz के साथ अपने होमवर्क और परीक्षाओं को एस करें!

If the NoGo plug does not go into the hole, the hole diameter is ________ the upper tolerance limit. Select one: a. Above b. Below

below

True or False: Go/NoGo gauges are all the same size. Select one: True False

false

________ plugs with a minimum depth line are used to make sure a hole is deep enough. Select one: a. NoGo b. Go

go

Which part of the Go/NoGo gauge is used to inspect the lower limit of the hole tolerance? Select one: a. Go Plug b. NoGo Plug c. Handle d. Pin

go plug

Typically, what color is the Go plug side of the gauge? Select one: a. Blue b. Yellow c. Green d. Brown

green

Which part of the Go/NoGo gauge is used to securely hold the Go/NoGo plugs? Select one: a. Pin b. Go Plug c. Handle d. NoGo Plug

handle

On some Go/NoGo plug gauges, small notches are cut out to enable inspection of minimum and maximum ________. Select one: a. Hole diameter b. Hole depth c. Rivet size d. Hole circumference

hole depth

Characteristics that can be inspected with the Go/NoGo plug gauge include ________. Select one: a. Hole radius and roughness b. Hole smoothness and hole texture c. Hole roundness and coarseness d. Hole diameter and hole depth

hole diameter and hole depth

If the Go plug slides freely into the hole, you will know that the hole diameter is ________ than the lower tolerance limit. Select one: a. Smaller b. Larger

larger

Which part of the Go/NoGo gauge is used to inspect the upper limit of the hole tolerance? Select one: a. Pin b. NoGo Plug c. Go Plug d. Handle

nogo plug

Typically, what color is the NoGo plug side of the gauge? Select one: a. Blue b. Orange c. Green d. Red

red

The handles are usually colored ________. Select one: a. Blue and Green b. Red and Yellow c. Red and Purple d. Red and Green

red and green

True or False: Go/NoGo gauges are used to determine if a product's dimensions are within the upper and lower tolerance limits. Select one: True False

true

True or False: Go/NoGo gauges do not give the user a variable reading of a product's dimensions. Select one: True False

true

True or False: It is important to check the diameter of the Go/NoGo gauge to make sure you are using the proper gauge for the holes you are inspecting. Select one: True False

true

True or False: It is important to make sure the Go/NoGo gauge is clean before you use it. Select one: True False

true

True or False: The Go/NoGo plugs will have the same diameters as the upper and lower tolerance limits of the hole. Select one: True False

true

True or False: When using maximum and minimum Go plugs, if the plug stops in the hole between these notches, the depth of the hole is within the tolerance. Select one: True False

true

How many notches do maximum and minimum Go plugs have cut into the plug? Select one: a. One b. Three c. Two d. Four

two


संबंधित स्टडी सेट्स

A&P II Chapter 16 reading, A&P II Chapter 17 Lab, A& P II Chapter 16 Lab, A&P II Chapter 17 Reading

View Set

Lewis: MED-SURG: Chapter 26: Burns

View Set

uppers, downers, and all arounders ch.1/2

View Set

General Psychology Chapters 11 and 14

View Set

Chapter 8: Transport Across a Membrane

View Set

Cost Accounting Chapter 2 Quiz 2

View Set