Introduction to Power Tools

When using a grinder, two of the most important pieces of PPE are __________________.

gloves and safety glasses

Before using a hammer drill or rotary hammer to drill into concrete, it is important to ___________________________.

review silica exposure standards

When using an appropriate bit, variable drills can be used like a _________________.

screw driver

The coarseness of a bandsaw's blade is rated in______________________________.

teeth per inch

Crosscutting with a table saw involves cutting wood_______________________.

to a specific length

When using power tools, NEVER engage the _____________.

trigger lock

A pneumatic drill is commonly used ____________________________.

when electricity is unavailable.

The adjustable tool rest on the bench grinder should be positioned _______________.

1/8 inch from the the grinder wheel

Most craftworkers who use pneumatic nailers operate their compressors at________________.

70 to 120 psi

A type of grinder accessory that can be used to provide a stable surface for flexible sanding discs or buffing pads to rest against is called______________________.

backing pad

The grinder BEST suited to sharpening worn edges on cutting tools is the _____________.

bench grinder

The part of the drill that holds the drill bit in place is called the _______________.

chuck

A power miter saw combines a miter box with a ___________________.

circular saw

Before connecting any power tool to a power source, it is critical to_____________.

confirm the power switch is set to off.

Before replacing parts such as bits, blades, or discs on any tool, it is important to ____________________________.

disconnect the power source

Compared with powder-actuated mailers, electric and pneumatic nailers_____________.

don not require certification

Never use a circular saw that does NOT have an upper blade guard because the __________________________.

exposed blade poses a danger

An angle grinder is used to grind______________________________.

hard, heavy materials

A Porta-Power is an example of a(n) ___________________________.

hydraulic tool

Saws with fine blades that are excellent for delicate and intricate cutting are called______________.

jigsaws

When using a circular saw, be sure to cut on the waste side of the cut mark to allow for the blade's ______________.

kerf

The most important maintenance on a circular saw involves the ________________.

lower blade guard

A compact tool that operates by moving attachments back and forth at very high speeds is the ___________________________________.

oscillating multi-tool

A low velocity fastening system used to drive steel pins or threads studs into masonry and steel is a(n) ___________________.

powder-actuated tool

Before using a pneumatically powered nailer for the first time, it is important to _____________________.

read the manufacture's manual