REVIT EXAM

When creating a floor the boundary sketch must be...

Closed

What is the main difference between a view made using (3D view) and a view made using ( camera)?

3D view is isometric and a camera view is perspective

Which editing command would you use to remove part of a wall?

Split

Which command do you use if you want two walls to come together at a corner

Trim/extend to corner

which of the following elements cannot be tagged using tag by category

rooms

when is (railing) needed (select all that apply)

when you want an extra railing in the middle of very wide stairs when create railings that are not attached to stairs or ramps

when you create a project in the Autodesk Revit software, do you draw in 3D or 2D?

you model in 3D almost all of the time, even when you are using what looks like a flat view

Which of the following types of CAD formats can you import into the Autodesk Revit software (select all that apply)

DWG, SAT, DGN

Which of the following commands creates a view that results in an independent view displaying the same model geometry and containing a copy of the annotation?

Duplicate with detailing

Where are the door and window sizes stored?

In the template file

How do you change the thickness of a floor

In the type selector, change the floor type

How do you add additional window or door families to a project?

Load them from the library

How do you add a level name and target to both ends of a level line?

Select the level line and ensure that the control box at both end is checked

How do you create additional door and window sizes?

Select the required door or window and in type properties, duplicate an existing door and modify it

Some walls are made from multilayers of materials, such as brick, block, and drywall. If the hatching for these materials is not displayed how do you change this?

Set the detail level to medium

Which of the following opening commands cuts an opening in multiple floors at the same time?

Shaft

What are the two methods for starting (move) or (copy)?

Start the command first and then select the objects, or select the objects and then start the command

How do you create a jog in a building section

Use the split element tool in the modify tab>modify panel

The purpose of callouts is to create...

View of part of the model that is linked to the main view from which it is taken

How do you change the swing direction of a door?

When placing a door, press <spacebar> Select an existing door and select the flip arrows

which of the following is the best method to use if the size of a view is too large for sheet?

activate the view and change the view scale

When you edit text, how many leaders can be added using the leader tool?

as many as you want at each end of the text

To create a roof sloping in one direction only you would create a roof...

by footprint and specify the slope along two parallel sides

How do you modify a stair so that it is wider at the bottom than at the top?

convert the run to sketch and modify the boundary and riser lines

How do you set up a view on a sheet that only displays part of a floor plan?

create a callout view displaying the part that you want to use and place the callout view on the sheet

What is the purpose of the project browser?

it is used to access and manage the views of the project

To create a flat roof, which of the following commands would you use to draw a sketch of the boundary of the room and to set its thickness?

roof by footprint with the thickness set by the roof type

Both (rotate) and (array) with (radial) have a center of rotation that defaults to the center of the element or group of elements toy have selected. How do you move the center of rotation to another point?

select the center of rotation and drag it to a new location in the options bar, click (place) and select the new point

In a schedule, if you change type information (such as a type mark) all instances of that type update with the new information

true

When inserting a component, you select the family that you want to use in the...

type selector

When creating a sloped floor (add point)

A point where several slopes converge

What type of view do you need to be in to add a level to your project?

And section view or elevation view

You place dimensions in a view and some of them display and others do not. To display the missing dimensions you need to modify the...

Annotation crop region

Where do you specify the height of a wall before you start drawing it? (select all that apply)

In the modify/place wall tab In properties palette

How do you include a tag with a door or window?

Select the tag on placement in the contextual tab

Which of the following are ways in which you can create additional parallel walls?

Use the offset tool in the modify tab Select an existing wall, hold down <ctrl> and drag the wall to a new location Use the wall tool and set an offset in the options bar

How do you create new text styles?

duplicate an existing type

Detail lines created in one view also display in related view

false

If the component you want to use is not available in the current project, where do you go to get the component (select all that apply)

in another project, copy the component to the clipboard and paste it into the current project in the current project, use (load family) and select the family from the list in the dialog box search Autodesk seek for a component and download it

Where do you change the wall type for a selected wall?

in properties, select a new type in the type selector drop-down list

How do you specify the size of a sheet?

in the new sheet dialog box, select a title block to control the sheet size

what is the purpose of an alignment line?

indicates that the new element you are placing or drawing is aligned with an existing object

when you use the moves with nearby elements option, can you control which elements move with the component

no, it moves with the closest wall

on how many sheets can a view be placed?

one

The difference between type properties and properties is...

properties stores parameters that apply to the selected individual elements. type properties stores parameters that impact every element of the same type in the project

What part of the interface changes according to the command you are using?

ribbon, options bar, properties palette

how do you select only doors in a view?

select all of the objects in the view and use (filter) to clear the other categories

When you start a new project, how do you specify the base information in the new file?

select the right template for the task

How is the title block information filled in (select all that apply)

select the title block and select the label that you want to change select the title block and modify in properties some of the information is filled in automatically

Which of the following methods makes a wall touch the underside of a roof?

select the wall and use (attach top/base)

which of the following describes the difference between a symbol and a component?

symbols are 2D and only display in one view components are 3D and display in many views

When a wall is moved, how do you update the dimension?

the dimensions automatically update

what happens when you delete a door in an Autodesk Revit model?

the door is removed from the sheet and the schedule

how do you edit a temporary dimension?

type a new value and press <enter>

Which of the following command would you use if you want to move a furniture component to a floor that is lower than the level where it was originally placed?

use (pick new host) and select the lower floor