Securing Network Hardware Final
A company implements a security policy that ensures that a file sent from the headquarters office to the branch office can only be opened with a predetermined code. This code is changed every day. Which two algorithms can be used to achieve this task? (Choose two.) HMAC MD5 3DES SHA-1 AES
3DES AES
What provides both secure segmentation and threat defense in a Secure Data Center solution? Cisco Security Manager software AAA server Adaptive Security Appliance intrusion prevention system
Adaptive Security Appliance
If AAA is already enabled, which three CLI steps are required to configure a router with a specific view? (Choose three.) Create a superview using the parser view view-name command. Associate the view with the root view. Assign users who can use the view. Create a view using the parser view view-name command. Assign a secret password to the view. Assign commands to the view.
Create a view using the parser view view-name command. Assign a secret password to the view. Assign commands to the view.
What function is provided by the RADIUS protocol? RADIUS provides encryption of the complete packet during transfer. RADIUS provides separate AAA services. RADIUS provides separate ports for authorization and accounting. RADIUS provides secure communication using TCP port 49.
RADIUS provides separate ports for authorization and accounting.
Which network monitoring technology uses VLANs to monitor traffic on remote switches? IPS IDS TAP RSPAN
RSPAN
An administrator discovers that a user is accessing a newly established website that may be detrimental to company security. What action should the administrator take first in terms of the security policy? Ask the user to stop immediately and inform the user that this constitutes grounds for dismissal. Create a firewall rule blocking the respective website. Revise the AUP immediately and get all users to sign the updated AUP. Immediately suspend the network privileges of the user.
Revise the AUP immediately and get all users to sign the updated AUP.
What are two hashing algorithms used with IPsec AH to guarantee authenticity? (Choose two.) SHA RSA DH MD5 AES
SHA MD5
What are the three signature levels provided by Snort IPS on the 4000 Series ISR? (Choose three.) security drop reject connectivity inspect balanced
Security Connectivity Balanced
How does a firewall handle traffic when it is originating from the private network and traveling to the DMZ network? The traffic is selectively denied based on service requirements. The traffic is usually permitted with little or no restrictions. The traffic is selectively permitted and inspected. The traffic is usually blocked.
The traffic is usually permitted with little or no restrictions.
What are three attributes of IPS signatures? (Choose three.) action length trigger type depth function
Type Trigger Action
The use of 3DES within the IPsec framework is an example of which of the five IPsec building blocks? authentication nonrepudiation integrity Diffie-Hellman confidentiality
confidentiality
Which three functions are provided by the syslog logging service? (Choose three.) gathering logging information authenticating and encrypting data sent over the network retaining captured messages on the router when a router is rebooted specifying where captured information is stored distinguishing between information to be captured and information to be ignored setting the size of the logging buffer
gathering logging information specifying where captured information is stored distinguishing between information to be captured and information to be ignored
Which two types of hackers are typically classified as grey hat hackers? (Choose two.) hacktivists cyber criminals vulnerability brokers script kiddies state-sponsored hackers
hacktivists vulnerability brokers
Which command is used to activate an IPv6 ACL named ENG_ACL on an interface so that the router filters traffic prior to accessing the routing table? ipv6 access-class ENG_ACL in ipv6 traffic-filter ENG_ACL out ipv6 traffic-filter ENG_ACL in ipv6 access-class ENG_ACL out
ipv6 traffic-filter ENG_ACL in
na
na
What are two examples of DoS attacks? (Choose two.) port scanning SQL injection ping of death phishing buffer overflow
ping of death buffer overflow
What is the main factor that ensures the security of encryption of modern algorithms? complexity of the hashing algorithm the use of 3DES over AES secrecy of the keys secrecy of the algorithm
secrecy of the keys
A client connects to a Web server. Which component of this HTTP connection is not examined by a stateful firewall? the source IP address of the client traffic the destination port number of the client traffic the actual contents of the HTTP connection the source port number of the client traffic
the actual contents of the HTTP connection
Refer to the exhibit. A network administrator is configuring AAA implementation on an ASA device. What does the option link3 indicate? the network name where the AAA server resides the specific AAA server name the sequence of servers in the AAA server group the interface name
the interface name
When the CLI is used to configure an ISR for a site-to-site VPN connection, which two items must be specified to enable a crypto map policy? (Choose two.) the hash the peer encryption the ISAKMP policy a valid access list IP addresses on all active interfaces the IKE Phase 1 policy
the peer a valid access list
What function is provided by Snort as part of the Security Onion? to generate network intrusion alerts by the use of rules and signatures to normalize logs from various NSM data logs so they can be represented, stored, and accessed through a common schema to display full-packet captures for analysis to view pcap transcripts generated by intrusion detection tools
to generate network intrusion alerts by the use of rules and signatures
What is typically used to create a security trap in the data center facility? IDs, biometrics, and two access doors high resolution monitors redundant authentication servers a server without all security patches applied
IDs, biometrics, and two access doors
Which algorithm can ensure data integrity? RSA AES MD5 PKI
MD5
What are two methods to maintain certificate revocation status? (Choose two.) subordinate CA OCSP DNS LDAP CRL
OCSP
What technology has a function of using trusted third-party protocols to issue credentials that are accepted as an authoritative identity? digital signatures hashing algorithms PKI certificates symmetric keys
PKI Certificates
Which protocol is an IETF standard that defines the PKI digital certificate format? SSL/TLS X.500 LDAP X.509
X.509
A company has a file server that shares a folder named Public. The network security policy specifies that the Public folder is assigned Read-Only rights to anyone who can log into the server while the Edit rights are assigned only to the network admin group. Which component is addressed in the AAA network service framework? automation accounting authentication authorization
authentication
What two features are added in SNMPv3 to address the weaknesses of previous versions of SNMP? (Choose two.) authentication authorization with community string priority bulk MIB objects retrieval ACL management filtering encryption
authentication encryption
Which three services are provided through digital signatures? (Choose three.) accounting authenticity compression nonrepudiation integrity encryption
authenticity nonrepudiation integrity
In an AAA-enabled network, a user issues the configure terminal command from the privileged executive mode of operation. What AAA function is at work if this command is rejected? authorization authentication auditing accounting
authorization
What ports can receive forwarded traffic from an isolated port that is part of a PVLAN? other isolated ports and community ports only promiscuous ports all other ports within the same community only isolated ports
only promiscuous ports
Refer to the exhibit. What will be displayed in the output of the show running-config object command after the exhibited configuration commands are entered on an ASA 5506-X? host 192.168.1.4 range 192.168.1.10 192.168.1.20 host 192.168.1.3, host 192.168.1.4, and range 192.168.1.10 192.168.1.20 host 192.168.1.3 host 192.168.1.3 and host 192.168.1.4 host 192.168.1.4 and range 192.168.1.10 192.168.1.20
range 192.168.1.10 192.168.1.20
A network technician has been asked to design a virtual private network between two branch routers. Which type of cryptographic key should be used in this scenario? hash key symmetric key asymmetric key digital signature
symmetric key
What are three characteristics of the RADIUS protocol? (Choose three.) utilizes TCP port 49 uses UDP ports for authentication and accounting supports 802.1X and SIP separates the authentication and authorization processes encrypts the entire body of the packet is an open RFC standard AAA protocol
uses UDP ports for authentication and accounting supports 802.1X and SIP is an open RFC standard AAA protocol
Refer to the exhibit. What algorithm will be used for providing confidentiality? RSA Diffie-Hellman DES AES
AES
Which three types of traffic are allowed when the authentication port-control auto command has been issued and the client has not yet been authenticated? (Choose three.) CDP 802.1Q IPsec TACACS+ STP EAPOL
CDP STP EAPOL
Which measure can a security analyst take to perform effective security monitoring against network traffic encrypted by SSL technology? Use a Syslog server to capture network traffic. Deploy a Cisco SSL Appliance. Require remote access connections through IPsec VPN. Deploy a Cisco ASA
Deploy a Cisco SSL Appliance.
What is the best way to prevent a VLAN hopping attack? Disable trunk negotiation for trunk ports and statically set nontrunk ports as access ports. Disable STP on all nontrunk ports. Use VLAN 1 as the native VLAN on trunk ports. Use ISL encapsulation on all trunk links.
Disable trunk negotiation for trunk ports and statically set nontrunk ports as access ports.
Which statement describes a characteristic of the IKE protocol? It uses UDP port 500 to exchange IKE information between the security gateways. IKE Phase 1 can be implemented in three different modes: main, aggressive, or quick. It allows for the transmission of keys directly across a network. The purpose of IKE Phase 2 is to negotiate a security association between two IKE peers.
It uses UDP port 500 to exchange IKE information between the security gateways.
Refer to the exhibit. Which conclusion can be made from the show crypto map command output that is shown on R1? The crypto map has not yet been applied to an interface. The current peer IP address should be 172.30.2.1. There is a mismatch between the transform sets. The tunnel configuration was established and can be tested with extended pings.
The crypto map has not yet been applied to an interface.
Which two protocols generate connection information within a state table and are supported for stateful filtering? (Choose two.) ICMP UDP DHCP TCP HTTP
UDP TCP
Which method is used to identify interesting traffic needed to create an IKE phase 1 tunnel? transform sets a permit access list entry hashing algorithms a security association
a permit access list entry
A web server administrator is configuring access settings to require users to authenticate first before accessing certain web pages. Which requirement of information security is addressed through the configuration? availability integrity scalability confidentiality
confidentiality
Upon completion of a network security course, a student decides to pursue a career in cryptanalysis. What job would the student be doing as a cryptanalyst? cracking code without access to the shared secret key creating hashing codes to authenticate data making and breaking secret codes creating transposition and substitution ciphers
cracking code without access to the shared secret key
Which rule action will cause Snort IPS to block and log a packet? log drop alert Sdrop
drop
What type of network security test can detect and report changes made to network systems? vulnerability scanning network scanning integrity checking penetration testing
integrity checking
Which two options can limit the information discovered from port scanning? (Choose two.) intrusion prevention system firewall authentication passwords encryption
intrusion prevention system firewall
A network administrator is configuring DAI on a switch. Which command should be used on the uplink interface that connects to a router? ip arp inspection trust ip dhcp snooping ip arp inspection vlan spanning-tree portfast
ip arp inspection trust
Which action do IPsec peers take during the IKE Phase 2 exchange? exchange of DH keys negotiation of IPsec policy negotiation of IKE policy sets verification of peer identity Explanation: The IKE protocols
negotiation of IPsec policy
What is the next step in the establishment of an IPsec VPN after IKE Phase 1 is complete? negotiation of the ISAKMP policy negotiation of the IPsec SA policy detection of interesting traffic authentication of peers
negotiation of the IPsec SA policy
What two ICMPv6 message types must be permitted through IPv6 access control lists to allow resolution of Layer 3 addresses to Layer 2 MAC addresses? (Choose two.) neighbor solicitations echo requests neighbor advertisements echo replies router solicitations
neighbor solicitations neighbor advertisements
Which two features are included by both TACACS+ and RADIUS protocols? (Choose two.) SIP support password encryption 802.1X support separate authentication and authorization processes utilization of transport layer protocols
password encryption utilization of transport layer protocols
What security countermeasure is effective for preventing CAM table overflow attacks? DHCP snooping Dynamic ARP Inspection IP source guard port security
port security
Which command raises the privilege level of the ping command to 7? user exec ping level 7 authorization exec ping level 7 accounting exec level 7 ping privilege exec level 7 ping
privilege exec level 7 ping
Which type of firewall makes use of a server to connect to destination devices on behalf of clients? packet filtering firewall proxy firewall stateless firewall stateful firewall
proxy firewall
What are the three core components of the Cisco Secure Data Center solution? (Choose three.) mesh network secure segmentation visibility threat defense servers infrastructure
secure segmentation visibility threat defense
Which zone-based policy firewall zone is system-defined and applies to traffic destined for the router or originating from the router? local zone inside zone self zone system zone outside zone Explanation: Zone
self zone
A company is concerned with leaked and stolen corporate data on hard copies. Which data loss mitigation technique could help with this situation? strong PC security settings strong passwords shredding encryption
shredding
Which threat protection capability is provided by Cisco ESA? web filtering cloud access security spam protection Layer 4 traffic monitoring
spam protection
ACLs are used primarily to filter traffic. What are two additional uses of ACLs? (Choose two.) : specifying internal hosts for NAT identifying traffic for QoS specifying source addresses for authentication reorganizing traffic into VLANs filtering VTP packets
specifying internal hosts for NAT identifying traffic for QoS
What are two reasons to enable OSPF routing protocol authentication on a network? (Choose two.) to prevent data traffic from being redirected and then discarded to ensure faster network convergence to provide data security through encryption to prevent redirection of data traffic to an insecure link to ensure more efficient routing
to prevent data traffic from being redirected and then discarded to prevent redirection of data traffic to an insecure link
What is a characteristic of a role-based CLI view of router configuration? A CLI view has a command hierarchy, with higher and lower views. When a superview is deleted, the associated CLI views are deleted. A single CLI view can be shared within multiple superviews. Only a superview user can configure a new view and add or remove commands from the existing views.
A single CLI view can be shared within multiple superviews.
When describing malware, what is a difference between a virus and a worm? A virus focuses on gaining privileged access to a device, whereas a worm does not. A virus replicates itself by attaching to another file, whereas a worm can replicate itself independently. A virus can be used to launch a DoS attack (but not a DDoS), but a worm can be used to launch both DoS and DDoS attacks. A virus can be used to deliver advertisements without user consent, whereas a worm cannot.
A virus replicates itself by attaching to another file, whereas a worm can replicate itself independently.
What is needed to allow specific traffic that is sourced on the outside network of an ASA firewall to reach an internal network? ACL NAT dynamic routing protocols outside security zone level 0
ACL
What is a limitation to using OOB management on a large enterprise network? Production traffic shares the network with management traffic. Terminal servers can have direct console connections to user devices needing management. OOB management requires the creation of VPNs. All devices appear to be attached to a single management network
All devices appear to be attached to a single management network.
What will be the result of failed login attempts if the following command is entered into a router? login block-for 150 attempts 4 within 90 All login attempts will be blocked for 150 seconds if there are 4 failed attempts within 90 seconds. All login attempts will be blocked for 90 seconds if there are 4 failed attempts within 150 seconds. All login attempts will be blocked for 1.5 hours if there are 4 failed attempts within 150 seconds. All login attempts will be blocked for 4 hours if there are 90 failed attempts within 150 seconds.
All login attempts will be blocked for 150 seconds if there are 4 failed attempts within 90 seconds.
What is the main difference between the implementation of IDS and IPS devices? An IDS can negatively impact the packet flow, whereas an IPS can not. An IDS needs to be deployed together with a firewall device, whereas an IPS can replace a firewall. An IDS would allow malicious traffic to pass before it is addressed, whereas an IPS stops it immediately. An IDS uses signature-based technology to detect malicious packets, whereas an IPS uses profile-based technology.
An IDS would allow malicious traffic to pass before it is addressed, whereas an IPS stops it immediately.
What are two drawbacks in assigning user privilege levels on a Cisco router? (Choose two.) Only a root user can add or remove commands. Privilege levels must be set to permit access control to specific device interfaces, ports, or slots. Assigning a command with multiple keywords allows access to all commands using those keywords. Commands from a lower level are always executable at a higher level. AAA must be enabled.
Assigning a command with multiple keywords allows access to all commands using those keywords. Commands from a lower level are always executable at a higher level.
Refer to the exhibit. Port security has been configured on the Fa 0/12 interface of switch S1. What action will occur when PC1 is attached to switch S1 with the applied configuration? Frames from PC1 will be forwarded since the switchport port-security violation command is missing. Frames from PC1 will be forwarded to its destination, and a log entry will be created. Frames from PC1 will be forwarded to its destination, but a log entry will not be created. Frames from PC1 will cause the interface to shut down immediately, and a log entry will be made. Frames from PC1 will be dropped, and there will be no log of the violation. Frames from PC1 will be dropped, and a log message will be created.
Frames from PC1 will cause the interface to shut down immediately, and a log entry will be made.
After issuing a show run command, an analyst notices the following command: crypto ipsec transform-set MYSET esp-aes 256 esp-md5-hmac What is the purpose of this command? It establishes the set of encryption and hashing algorithms used to secure the data sent through an IPsec tunnel. It defines the default ISAKMP policy list used to establish the IKE Phase 1 tunnel. It establishes the criteria to force the IKE Phase 1 negotiations to begin. It indicates that IKE will be used to establish the IPsec tunnel for protecting the traffic
It establishes the set of encryption and hashing algorithms used to secure the data sent through an IPsec tunnel.
What network testing tool is used for password auditing and recovery? Nessus Metasploit L0phtcrack SuperScan
L0phtcrack
How does a Caesar cipher work on a message? Letters of the message are replaced by another letter that is a set number of places away in the alphabet. Letters of the message are rearranged randomly. Letters of the message are rearranged based on a predetermined pattern. Words of the message are substituted based on a predetermined pattern.
Letters of the message are replaced by another letter that is a set number of places away in the alphabet.
Refer to the exhibit. The ip verify source command is applied on untrusted interfaces. Which type of attack is mitigated by using this configuration? DHCP spoofing DHCP starvation STP manipulation MAC and IP address spoofing
MAC and IP address spoofing
N/A
N/A
Consider the access list command applied outbound on a router serial interface. access-list 100 deny icmp 192.168.10.0 0.0.0.255 any echo reply What is the effect of applying this access list command? The only traffic denied is echo-replies sourced from the 192.168.10.0/24 network. All other traffic is allowed. The only traffic denied is ICMP-based traffic. All other traffic is allowed. No traffic will be allowed outbound on the serial interface. Users on the 192.168.10.0/24 network are not allowed to transmit traffic to any other destination.
No traffic will be allowed outbound on the serial interface.
Refer to the exhibit. A corporate network is using NTP to synchronize the time across devices. What can be determined from the displayed output? Router03 is a stratum 2 device that can provide NTP service to other devices in the network. The time on Router03 may not be reliable because it is offset by more than 7 seconds to the time server. The interface on Router03 that connects to the time sever has the IPv4 address 209.165.200.225. Router03 time is synchronized to a stratum 2 time server.
Router03 is a stratum 2 device that can provide NTP service to other devices in the network.
What network security testing tool has the ability to provide details on the source of suspicious network activity? SIEM SuperScan Zenmap Tripwire
SIEM
Refer to the exhibit. A network administrator configures a named ACL on the router. Why is there no output displayed when the show command is issued? The ACL is not activated. The ACL name is case sensitive. The ACL has not been applied to an interface. No packets have matched the ACL statements yet.
The ACL name is case sensitive.
What are two disadvantages of using an IDS? (Choose two.) The IDS does not stop malicious traffic. The IDS works offline using copies of network traffic. The IDS has no impact on traffic. The IDS analyzes actual forwarded packets. The IDS requires other devices to respond to attacks.
The IDS does not stop malicious traffic. The IDS requires other devices to respond to attacks.
What are two benefits of using a ZPF rather than a Classic Firewall? (Choose two.) ZPF allows interfaces to be placed into zones for IP inspection. The ZPF is not dependent on ACLs. Multiple inspection actions are used with ZPF. ZPF policies are easy to read and troubleshoot. With ZPF, the router will allow packets unless they are explicitly blocked
The ZPF is not dependent on ACLs. ZPF policies are easy to read and troubleshoot.
Refer to the exhibit. According to the command output, which three statements are true about the DHCP options entered on the ASA? (Choose three.) The dhcpd address [ start-of-pool ]-[ end-of-pool ] inside command was issued to enable the DHCP server. The dhcpd address [ start-of-pool ]-[ end-of-pool ] inside command was issued to enable the DHCP client. The dhcpd enable inside command was issued to enable the DHCP server. The dhcpd auto-config outside command was issued to enable the DHCP client. The dhcpd auto-config outside command was issued to enable the DHCP server. The dhcpd enable inside command was issued to enable the DHCP client
The dhcpd address [ start-of-pool ]-[ end-of-pool ] inside command was issued to enable the DHCP server. The dhcpd enable inside command was issued to enable the DHCP server. The dhcpd auto-config outside command was issued to enable the DHCP client.
Which two statements describe the characteristics of symmetric algorithms? (Choose two.) They are commonly used with VPN traffic. They use a pair of a public key and a private key. They are commonly implemented in the SSL and SSH protocols. They provide confidentiality, integrity, and availability. They are referred to as a pre-shared key or secret key.
They are commonly used with VPN traffic. They are referred to as a pre-shared key or secret key.
Refer to the exhibit. Which two conclusions can be drawn from the syslog message that was generated by the router? (Choose two.) This message resulted from an unusual error requiring reconfiguration of the interface. This message indicates that service timestamps have been configured. This message indicates that the interface changed state five times. This message is a level 5 notification message. This message indicates that the interface should be replaced.
This message indicates that service timestamps have been configured. This message is a level 5 notification message.
What are three characteristics of ASA transparent mode? (Choose three.) This mode does not support VPNs, QoS, or DHCP Relay. It is the traditional firewall deployment mode. This mode is referred to as a "bump in the wire." NAT can be implemented between connected networks. In this mode the ASA is invisible to an attacker. The interfaces of the ASA separate Layer 3 networks and require IP addresses in different subnets.
This mode does not support VPNs, QoS, or DHCP Relay. This mode is referred to as a "bump in the wire. In this mode the ASA is invisible to an attacker.
Which statement describes a difference between the Cisco ASA IOS CLI feature and the router IOS CLI feature? ASA uses the ? command whereas a router uses the help command to receive help on a brief description and the syntax of a command. To use a show command in a general configuration mode, ASA can use the command directly whereas a router will need to enter the do command before issuing the show command. To complete a partially typed command, ASA uses the Ctrl+Tab key combination whereas a router uses the Tab key. To indicate the CLI EXEC mode, ASA uses the % symbol whereas a router uses the # symbol.
To use a show command in a general configuration mode, ASA can use the command directly whereas a router will need to enter the do command before issuing the show command.
What is a characteristic of a DMZ zone? Traffic originating from the inside network going to the DMZ network is not permitted. Traffic originating from the outside network going to the DMZ network is selectively permitted. Traffic originating from the DMZ network going to the inside network is permitted. Traffic originating from the inside network going to the DMZ network is selectively permitted.
Traffic originating from the outside network going to the DMZ network is selectively permitted.
How does a firewall handle traffic when it is originating from the public network and traveling to the DMZ network? Traffic that is originating from the public network is inspected and selectively permitted when traveling to the DMZ network. Traffic that is originating from the public network is usually permitted with little or no restriction when traveling to the DMZ network. Traffic that is originating from the public network is usually forwarded without inspection when traveling to the DMZ network. Traffic that is originating from the public network is usually blocked when traveling to the DMZ network.
Traffic that is originating from the public network is inspected and selectively permitted when traveling to the DMZ network.
What network testing tool would an administrator use to assess and validate system configurations against security policies and compliance standards? Tripwire L0phtcrack Nessus Metasploit
Tripwire
How do modern cryptographers defend against brute-force attacks? Use statistical analysis to eliminate the most common encryption keys. Use a keyspace large enough that it takes too much money and too much time to conduct a successful attack. Use an algorithm that requires the attacker to have both ciphertext and plaintext to conduct a successful attack . Use frequency analysis to ensure that the most popular letters used in the language are not used in the cipher message.
Use a keyspace large enough that it takes too much money and too much time to conduct a successful attack.
A user complains about being locked out of a device after too many unsuccessful AAA login attempts. What could be used by the network administrator to provide a secure authentication access method without locking a user out of a device? Use the login delay command for authentication attempts. Use the login local command for authenticating user access. Use the aaa local authentication attempts max-fail global configuration mode command with a higher number of acceptable failures. Use the none keyword when configuring the authentication method list.
Use the login delay command for authentication attempts.
What are two drawbacks to using HIPS? (Choose two.) With HIPS, the success or failure of an attack cannot be readily determined. With HIPS, the network administrator must verify support for all the different operating systems used in the network. HIPS has difficulty constructing an accurate network picture or coordinating events that occur across the entire network. If the network traffic stream is encrypted, HIPS is unable to access unencrypted forms of the traffic. HIPS installations are vulner able to fragmentation attacks or variable TTL attacks.
With HIPS, the network administrator must verify support for all the different operating systems used in the network. HIPS has difficulty constructing an accurate network picture or coordinating events that occur across the entire network.
What are two security measures used to protect endpoints in the borderless network? (Choose two.) denylisting Snort IPS DLP DMZ rootkit
denylisting DLP
Which two tasks are associated with router hardening? (Choose two.) placing the router in a secure room disabling unused ports and interfaces installing the maximum amount of memory possible securing administrative access using uninterruptible power supplies
disabling unused ports and interfaces securing administrative access
What command is used on a switch to set the port access entity type so the interface acts only as an authenticator and will not respond to any messages meant for a supplicant? dot1x pae authenticator authentication port-control auto aaa authentication dot1x default group radius dot1x system-auth-control
dot1x pae authenticator
Which type of packet is unable to be filtered by an outbound ACL? multicast packet ICMP packet broadcast packet router-generated packet
router-generated packet
What would be the primary reason an attacker would launch a MAC address overflow attack? so that the switch stops forwarding traffic so that legitimate hosts cannot obtain a MAC address so that the attacker can see frames that are destined for other hosts so that the attacker can execute arbitrary code on the switch
so that the attacker can see frames that are destined for other hosts
Which type of firewall is supported by most routers and is the easiest to implement? next generation firewall stateless firewall stateful firewall proxy firewall
stateless firewall
Which attack is defined as an attempt to exploit software vulnerabilities that are unknown or undisclosed by the vendor? zero-day Trojan horse brute-force man-in-the-middle
zero-day