Solid works Exam
To draw a rectangle at an angle, you need to use the __________ tool.
3 point corner rectangle
extrude bass boss or the revolve base boss the view is automatically changed into a ____ view
3D
Which of the following tools is used to create a circular pattern in SOLIDWORKS? (a) Pattern (b) Circular Sketch Pattern (c) Array (d) None of these
Circular Sketch Pattern
The __________ tool is used to create a circular pattern in the sketching environment of SOLIDWORKS.
Circular Sketch pattern
Which of the following relations forces a selected arc to share the same center point with another arc or point? a) Concentric b) Coradial c) Merge Points d) Equal
Concentric
Which of the following entities is not considered while converting a sketch into a feature? (a) Sketched circles (b) Sketched lines (c) Construction lines (d) None of these
Construction lines
The __________ tool is used to invoke dynamic mirroring.
Dynamic Mirror Entities
Which of the following tools is used to create an automatic mirror line? (a) Dynamic Mirror Entities (b) Mirror (c)Automatic Mirror (d) None of these
Dynamic Mirror Entities
Which of the following PropertyManagers is displayed while drawing an elliptical arc? (a)Arc PropertyManager (b)Ellipse PropertyManager (c)Elliptical Arc PropertyManager (d) None of these
Ellipse Property Manager
By default, the cursor jumps through a distance of 5 mm when the grid snap is on. (T/F)
F
If you save a file in the sketching environment and then open it the next time, it will open in the part modeling environment. (T/F)
F
In SOLIDWORKS, circles are drawn by specifying the center point of the circle and then entering the radius of the circle in the dialog box displayed. (T/F)
F
In the sketching environment, you can apply fillets to two parallel lines. (T/F)
F
The design intent is not captured in the sketch created using the mirror line. (T/F)
F
The origin is a blue icon that is displayed in the middle of the sketcher screen. (T/F)
F
The preview of an entity to be extended is displayed in red. (T/F)
F
The sketched entities can be mirrored without using a centerline. (T/F)
F
TheAdd angle dimension between axes check box in theLinear Pattern PropertyManager is used to display the angular dimension between the two directions of a pattern. (T/F)
F
When you chose the add-relation button the the apply relations property manager is displayed (T/F)
F
When you open a new SOLIDWORKS document, it is not maximized in the SOLIDWORKS window. (T/F)
F
You can choose Insert> Customize from the SOLIDWORKS menus to display the Customize dialog box. (T/F)
F
You can make modifications in the read-only file (T/F)
F
You cannot offset a single entity using the Offset Entities tool. (T/F)
F
You cannot trim a sketched entity using the TrimEntities tool. (T/F)
F
a sketch is revolved using the boss extrude property manager (T/F)
F
You can convert a sketched entity into a construction entity by selecting the __________ check box provided in the Property Manager.
For Construction
__________ are temporary lines that are used to track a particular point on the screen.
Inference
Which of the following PropertyManagers is displayed when you select a line of a rectangle? (a) Line Properties PropertyManager (b)Line/Rectangle PropertyManager (c)Rectangle PropertyManager (d) None of these
Line properties property manager
The __________ tool is used to create a linear pattern in the sketching environment of
Linear Sketch Pattern
Which of the following dialog boxes is displayed when you add an extra dimension to a sketch or add an extra relation that Overdefines the sketch a) Over defining b) Delete relation c) Make dimension driven? d) Add Geomtric Relations
Make dimension driven?
Which of the following dialog boxes is displayed when you modify a dimension? a) Modify Dimensional value b) Insert a value c) Modify d) None
Modify
Which of the following types of sketch status change the color of the entities to red? a) Underdefined b) Overdefined c) Dangling d) None
Overdefined
To modify a sketched circle, select it using the __________ tool.
Select
Which of the following options is not displayed in the New SOLIDWORKS Document dialog box? (a)Part (b)Assembly (c)Drawing (d) Sketch
Sketch
Which of the following Property Managers is displayed on the left of the drawing area when you choose Tools> Sketch Tools >Chamferfrom the SOLIDWORKS menus? (a) Sketch Chamfer (b) Sketcher Chamfer (c) Sketching Chamfer (d )Chamfer
Sketch Chamfer
Which of the following PropertyManagers is displayed when you choose the Sketch Fillet button from the Sketch CommandManager? (a)Sketch Fillet (b)Fillet (c)Surface Fillet (d)Sketching Fillet
Sketch Fillet
A three point arc is drawn by defining the start point, the endpoint, and a point on the arc. (T/F)
T
If you rotate the view when the current display mode is set to hidden lines visible the hidden lines in the model are automatically displayed (T/F)
T
Some relations are automatically added to a sketch (T/F)
T
The Trim Entities tool is also used to extend the sketched entities. (T/F)
T
The base feature of any design is a sketched feature and is created by drawing a sketch. (T/F)
T
There are four types of slot tools available in SOLIDWORKS. (T/F)
T
You can also specify the depth of the extrusion dynamically in the preview of the extruded feature (T/F)
T
You can apply a fillet to two nonparallel and non-intersecting entities. (T/F)
T
You can delete the sketched entities by right-clicking on them and then choosing the Delete option from the shortcut menu. (T/F)
T
You can invoke the arc mode using the Line tool. (T/F)
T
You can invoke the drawing display tools such as zoom to fit while the preview of a model is displayed on the screen (T/F)
T
You can modify the arrowhead style of a selected dimension (T/F)
T
which of the following features an open sketch can be converted a) Thin Feature b) Solid feature c) a and b d) none
Thin feature
The ______ dimension is is used to dimension a line at an angle with respect to x and y axis
aligned
The ________ check box is used to apply automatic fillets when creating an open sketch thin feature
auto fillet corners
which of the following tool is used to fully define a sketch a) Fully Defined Sketch b) Smart Dimension c) None d) both a and b
both fully define sketch and smart dimension
dimensioning between two arcs, two circles, or between arc and circle is done from
center point to center point
cap ends......only when the sketch of the thin base feature is
closed
The thin revovled features can be created using a _____ or an____ sketch
closed, open
The _____ dimensions or relations cannot determine the position of one or more sketch entities
dangling
minimum or maximum distance between two circles using the __________ property manager
dimension
the ______ check box is used to create a feature with different extrude values in both directions of the sketch plane
direcrtion
A ______ sketch is is the one in which all entities are described by dimensions, relations, or both
fully defined sketch
when you chose the wide-frame button all______ lines will be displayed along with the visible lines in the model
hidden
In SOLIDWORKS, a polygon is considered as a combination of which of the following entities? (a) Lines (b) Arcs (c) Splines (d) None of these
lines
In SOLIDWORKS, a rectangle is considered as a combination of individual __________.
lines
The ________ Property manager is displayed when invoking the dynamic mirror entities tool
mirror
which of the following parameters is not displayed in the preview of the model a) Depth b) Draft Angle c) None D) a and B
none of these
The ________ sketch geometry is constrained by too many dimensions/ relations
overdefined
The _______ tool is used to display the perspective view of a model
perspective
which of the following buttons is available in the display style of the view heading toolbar a) Hidden Lines Removed b) Hidden Lines Visible c) Shaded d) Perspective
perspetive
The linear diametric dimensions are applied to the sketches of ______ features
revolved
You can invoke the __________tool or press the ESC key to exit the currently active sketching tool.
select
The_________ button is used to display the shadow in the shaded mode
shadows in shaded mode
you can also invoke the rotate view tool by choosing the rotate view option from the ______ that is displayed when you right click the drawing area
shortcut menu
you can invoke...... relations button from the _______ command manager
sketch
the _________ relations forces two selected lines, arcs, points, ellipses to remain equidistant from center line
symmetric
When you select a tangent entity to draw a tangent arc, the __________ relation is applied between the start point of the arc and the tangent entity.
tangent
which of the following buttons is used to modify the orientation of the standard view a) Update Standard Views b) Reset Standard Views c) None d) both
update standard view
the _______ button is used to display the shadow of the model
view > display> shadows in shaded mode