Solidworks

Different types of patterns that can be created by using the pattern tools are listed below and discussed next.(T/F)

Circular pattern and Curve Driven Pattern Linear Pattern Fill Patter and Variable Pattern Sketch Driven Pattern and Table Driven Pattern

In SOLIDWORKS, you cannot customize material properties.

False

Mechanical mates are used for creating a mechanism between components of an assembly. (T/F)

True

Nested sketches are similar to closed sketches with the only difference that the nested sketches have more than one closed contours (T/F)

True

On selecting the Select chain check box , all the contiguous entities of the selected entity get selected, automatically in the drawing area.

True

One way to measure the distance between entities, click on the Evaluate tab and then click on the Measure tool in the Evaluate CommandManager. The Measure window appears. (T/F)

True

Open Sketches are those sketches that are open from one or more ends. On extruding an open sketch, a thin feature is created. (T/F)

True

Standard mates are used for positioning components of an assembly by restricting or reducing the degrees of freedom of the components. (T/F)

True

The Spiral option is used for creating a spiral curve by defining its pitch and number of revolutions. On selecting this option, the options for creating a spiral curve by defining its pitch and revolutions are enabled in the Parameters rollout. (T/F)

True

The Surface/Face/Plane option of the From drop-down list is used for selecting a surface, a face, or a plane as the start condition (from where extrusion starts) of the extrusion (T/F)

True

The availability of the suggested relations in the Pop-up toolbar depends upon the type of entities selected.

True

While invoking the Drawing environment, you can select the required sheet size and sheet format.

True

You can apply geometric relations on a sketch entity, between sketch entities, and between sketch entities and planes, axes, edges, or vertices

True

You can extend sketch entities up to their nearest intersection by using the Extend Entities tool.

True

You can offset sketch entities or edges at a specified offset distance by using the Offset Entities tool.

True

You can rotate a sketch entity or entities at an angle by using the Rotate Entities tool.

True

You can stretch entities of a sketch by using the Stretch Entities tool.

True

a revolved cut feature is created by removing material from the model by revolving a sketch around a centerline or an axis

True

A lofted feature is created by lofting two or more than two profiles (sections) such that the cross-sectional shape of the lofted feature transits from one profile to another. (T/F)

True

A half section view is created by cutting an object using an imaginary cutting plane or section line that passes halfway through the object.

True

A model view is an independent view of a model. It is also known as base, first or parent view.

True

A shell feature is a thin walled feature, which is created by making a model hollow from inside (T/F)

True

Engineering drawings follow the _____________ angle of projections.

first and third

All degrees of freedoms of a fully defined sketch are _____.

fixed

While creating a sweep feature, the sketch profile option is selected by default. As a result, the profile follows the _____.

path

When the ________ _______ check box is unchecked, all the instances of the linear pattern maintain same geometrical relations as the original or parent feature.

pattern seed only

To rotate sketch entities anti-clockwise, you need to define the ________ angle value.

positive

The _______ ______ mate is used for center aligning two rectangular profiles, two circular profiles, or a rectangular profile and a circular profile with each other.

profile center

If the Rho value is less than ___ then the resultant fillet profile becomes elliptical in shape.

0.5

If you make any change in a component in the Part modeling environment, the same change is automatically reflected in the assembly environment and vice versa. This is because of the _________ association property of Solidworks.

Bidirectional

The number of pattern instances specified in the Number of Instances field do not include the parent or original instance selected to pattern. (True/False)

False

You cannot delete relations that have already been applied between the selected entities.

False

You cannot modify dimensions once they have been applied.

False

In SOLIDWORKS, after assigning material properties to a model, you can calculate its mass properties such as mass and volume by using the ____ ____ _______ of the Evaluate CommandManager

Mass properties tool

In SOLIDWORKS, you can assemble components together by using what types of mates?

Mechanical

Similar to adding material by extruding and revolving a sketch, you can remove material from a model by using the ______________ and _________________. (Select two options.)

Revolved cut tools/extruded cut

The ______ _______ toolbar allows you to change the orientation of a component before defining its placement point in the assembly environment

Rotate Context

The options in the ______ drop-down list are used for defining the start condition of extrusion.

Start condition

A Cosmetic thread represents the real thread of a feature. It is recommended to add cosmetic threads to holes, fasteners, or cylindrical features of a model, because adding cosmetic threads help in reducing the complexity of the model and improves the overall performance of the system (T/F)

True

A broken-out section view is created by removing the portion of an existing view up to a specified depth in order to view inner details of the object.

True

A sweep feature is created by adding material by sweeping a profile along a path. After creating the path and the profile, click on the Swept Boss/Base tool in the Features CommandManager. The Sweep PropertyManager appears.(T/F)

True

After creating parts and assemblies, you need to generate 2D drawings. 2D drawings are the technical drawings, which are used to fully and clearly communicate the information about the end product to be manufactured

True

By default, the Follow Path option is selected in the drop-down list. As a result, the profile follows the path by maintaining the same angle of orientation from start to end by aligning itself normal to the path.(T/F)

True

Closed sketches are those in which all entities are connected end to end with each other without any gaps.

True

Creating an exploded view of an assembly is important from the presentation point of view. Also, an exploded view of an assembly helps you easily identify the position of each component of an assembly.

True

Creating multiple instances of features, faces, or bodies by using sketch points of a sketch is known as sketch driven pattern. In a sketch driven pattern, the parent/seed feature is propagated to each sketch point of the sketch.(T/F)

True

Creating multiple instances of features, faces, or bodies in one or two linear directions is known as linear pattern.(T/F)

True

Creating multiple instances of features, faces, or bodies, circularly around an axis is known as circular pattern.(T/F)

True

In SOLIDWORKS, you can add notes on a drawing sheet by using the Note tool. Generally, adding notes in drawings is used for conveying or providing additional informations that is not available in the drawing views.

True

In SOLIDWORKS, you can apply geometric relations either by using the Add Relation tool or by using the Pop-up toolbar

True

In SOLIDWORKS, you can mirror features, faces, or bodies about a mirroring plane by using the Mirror tool. You can select a plane or a planar face of the model as the mirroring plane.(T/F)

True

In SOLIDWORKS, you can move individual components of an assembly along their free degrees of freedoms by using the Move Component tool. (T/F)

True

In the Top-down Assembly Approach, all the components of an assembly are created within the Assembly environment. (T/F)

True

The Bottom-up Assembly Approach is most widely used approach for assembling components. (T/F)

True

The Circular Profile radio button of the Profile and Path rollout is used for creating a sweep feature that has a circular cross section such as solid rod or hollow tube by specifying the diameter value.(T/F)

True

The Direction Vector field is used for selecting a direction vector that defines the start constraint for a lofted feature. You can select a plane, a linear edge, a linear sketch entity, or an axis as direction vector. (T/F)

True

The method of creating a sweep cut feature is the same as creating a sweep feature with the only difference that a sweep cut feature is created by removing material from the model.(T/F)

True

The options in the Items To Fillet rollout are used for selecting entities such as edges, faces, and features to create a fillet.(T/F)

True

The options in the Start and End Tangency rollout of the PropertyManager are used for specifying the start and end tangency of the sweep feature. (T/F)

True

The up to vertex option is used for defining the end condition or termination of extrusion by selecting a ______.

Vertex

Numbered or lettered _________ are attached to components to reference their information in the Bill of Material

balloons

A ___________ is one of the important features of any drawing. It contains information related to the number of components, material, quantity, and so on.

bill of materials

While offsetting sketch entities, if you click on the select _____ check box, all the contiguous entities of the selected entity get selected.

chain

A _________________ is a bevel face that is non perpendicular to its adjacent faces.

chamfer

The __________ relation is used for coinciding a sketch point on to a line, an arc, or an elliptical entity.

coincident

A ___________ radius fillet is a fillet that has a constant radius throughout the selected edge.

constant

You can project the edges of existing features as sketch entities onto the current sketching plane by using the _______ ________ tool.

convert entiteis

The curve through XYZ points tool is used for creating a curve by specifying the _______ points.

coordinate

In SolidWorks the Hole Wizard tool is used for creating standard holes such as _________________ as per standard specifications.

counterbore, sink, and straight tap

A _______ view is created in order to show the portion of an existing view at an enlarged scale.

detail

The _____ fillet is created between the two non-continuous faces of a model.

face

You cannot create a rib feature with a draft angle. (T/F)

false

The _____ _______ fillet is created tangent to three adjacent faces of a model.

full round

The ____ mate allows two components to rotate relative to each other and form a gear mechanism.

gear

By selecting the pitch and revolution option, you can create a _______ curve

helical

The _________ diameter dimension can be applied to a sketch of a revolved feature.

linear

The ____ ______ mate is used for translating linear motion into rotational motion from one component to another and vice versa.

linear/linear coupler mate

In Solidworks, you can create ______ and _____ types of exploded views.

radial, regular

A surface finish symbol has three components:

surface roughness, waviness, lay

The swept boss/base tool is used for creating _______ features.

sweep

The _____ _______ pattern is created by specifying coordinate points for each pattern instance with respect to a coordinate system.

table driven

In the ___________ Assembly Approach, all components of an assembly are created within the Assembly environment itself.

top down

You can control the display or visibility of the applied geometric relations in the drawing area by using the _____ _______ ____________ tool in the View (Heads-Up) toolbar.

view sketch relations