Tech Ed: Band Saw Test

Always wear sanitized safety glasses with Z87.1 markings when operating the Band Saw

True

Blade guard should be 1/8-1/2 of an inch above the piece being cut

True

Cut lines should be clearly marked before cutting

True

Hold the material firmly against the table

True

Keep fingers a minimum of 2 inches from the cut line

True

When cutting a tight curve, first cut relief cuts, then push the workpiece slowly without twisting or bending the blade

True

Cutting round material is allowed without a V-Block

False

Do not inspect material for foreign objects prior to cutting

False

Hold the material against the blade as you turn on the machine

False

Remove scraps from the band saw while the blade is still moving

False