Test Import 1

अब Quizwiz के साथ अपने होमवर्क और परीक्षाओं को एस करें!

Device Requirements -You provide Microsoft Teams-certified IP phones to users in the IT and R&D departments. Each device must meet the following requirements: The time zone on the phones used by the R&D department must be set to UTC-8.The time zone on the phones used by the IT department must be set to UTC-5. All phones must lock automatically after 60 seconds of inactivity. You need to configure the IP phones to meet the device requirements.What is the minimum number of configuration profiles you should create? A. 1 B. 2 C. 3 D. 4 -

2 On each configuration profile, you will set the timeout to be 1 minute (60 seconds). Is this test at all valid? There seems to be a lot of people disagreeing with correctness of many of the answers ?? It's valid, but don't trust on the answers, check if there's a discussion like this question and try to recreate the scenario with a tenant.

You attempt to review call quality by location. When you sign in to the Microsoft Call Quality Dashboard, you discover that no locations are defined. You need to ensure that all the call quality information in the dashboard is segmented by location. What should you do first? A. From the Microsoft Teams admin center, configure reporting labels. B. From an administrator's computer, run the Network Testing Companion. C. From PowerShell, run the Set-CsQoEConfiguration cmdlet. D. From the Microsoft Teams admin center, run the Network Planner. -

A - From the Microsoft Teams admin center, configure reporting labels.

Litware wants to pilot Phone System as a calling solution for 20 IT department users. The pilot project will receive phone numbers from Microsoft Teams. You need to identify the requirements for the voice pilot project. Which 2 actions should you perform? A. Assign an additional license and phone number to each user. B. Deploy a Session Border Controller (SBC) for Litware. C. Purchase a Calling Plan for each user. D. Create a dial plan for Litware. E. Purchase a Calling Plan for Litware. -

A. Assign an additional license and phone number to each user. E. Purchase a Calling Plan for each user. Litware wants to pilot Phone System as a calling solution for 20 IT department users - so get a calling plan for each user - instead of whole Litware. That is because the calling plans are assigned on a user by user basis. So for example you would assign a E5 license with the added calling plan add-on per user/ per month

Only users in a partner company fabrikam.com must be able to collaborate by using guest accounts. How? A. From the Azure Active Directory admin center, modify the External collaboration settings to include fabrikam.com only. B. From the Microsoft 365 admin center, modify the Office 365 groups settings. C. From the External access settings in the Microsoft Teams admin center, add fabrikam.com to the Allowed list of domains. D. From the Microsoft Teams admin center, turn off org-wide guest access and manually add guest users from fabrikam.com to teams. Topic 9-31 -

A. From the Azure Active Directory admin center, modify the External collaboration settings to include fabrikam.com only. While adding fabrikam.com to the list of allowed domains will allow federation with the domain, the case study mentions to collaborate in Teams, so modifying the External collaboration settings to include fabrikam.com only. External Access in Teams Admin Center is for comms with external domains. External Collaboration in Azure AD Admin Center is for collaboration which is the stated goal.

The users report poor audio quality when they use Microsoft Teams from the network. You discover that the media traffic from Microsoft Teams is NOT processed by the QoS solution. You need to ensure that all the media traffic is processed by the QoS solution. Which 2 actions should you perform? A. From the Microsoft Teams admin center, set Insert Quality of Service (QoS) markers for real-time media traffic to On. B. From the Microsoft Teams client, select a certified Microsoft Teams audio device. C. From PowerShell, run the Set-CsQoEConfiguration cmdlet. D. From Group Policy Management, create a Group Policy Object (GPO) that contains the Policy based QoS settings, and then link the GPO to the domain. E. From the Microsoft Teams admin center, turn on logging for the device configuration profile. -

A. From the Microsoft Teams admin center, set Insert Quality of Service (QoS) markers for real-time media traffic to On. D. From Group Policy Management, create a Group Policy Object (GPO) that contains the Policy based QoS settings, and then link the GPO to the domain. The GPO is required on the Windows client so as to mark the traffic correct

An administrator reports that teams were deleted accidentally today. You need to restore the teams as quickly as possible. Which cmdlets should you run? A. Get-AzureADMSDeletedGroup and Restore-AzureADMSDeletedDirectoryObject B. Get-Team and Restore-ADObject C. Get-AzureADMSDeletedGroup and Restore-ADObject D. Get-AzureADGroup and Restore-AzureADMSDeletedDirectoryObject E. Get-Team and Restore-AzureADMSDeletedDirectoryObject -

A. Get-AzureADMSDeletedGroup and Restore-AzureADMSDeletedDirectoryObject B\C: Restore-ADObject is for traditional on prem AD. D: Get-AzureADGroup is used for active group. E: You need to get the group ID that was deleted first before you can restore the correct group.

Litware identifies the following collaboration and meeting requirements: Cloud recording must be disabled for all Microsoft Teams meetings organized by users in the HR departments only.Meeting email invitations must be customized to include the Logo URL, Legal URL, and Help URL of Litware. You need to configure Microsoft Teams to meet the collaboration and meeting requirements. Which 2 actions should you perform from the Microsoft Teams admin center? A. Modify the Meeting settings. B. Create a teams policy. C. Create a meeting policy. D. Create a live events policy. E. Modify the Teams settings. -

A. Modify the Meeting settings. C. Create a meeting policy.

You have a Microsoft Teams team named Sales that is set to Private.Users report that they can view the Sales team from a list of suggested teams. You need to hide the team from the list of suggested teams. What should you do from the Microsoft Teams client? A. Modify the Team discovery settings. B. Select the Hide team option. C. Modify the team privacy settings. -

A. Modify the Team discovery settings. It looks like this feature has been cancelled, however if it does come up I think the answer is modify the Team discovery settings.. https://www.microsoft.com/en-us/microsoft-365/roadmap?filters=&searchterms=Microsoft%2CTeams%2C-%2CManage%2Cdiscovery%2Cof%2Cprivate%2Cteams

Buried in case study up above: "All groups are created by using dynamic group membership that use the department attribute." You identify the following issues during the pilot project: Microsoft Teams users report that they often receive continuous notifications from the Microsoft Teams client for 20 minutes. Two pilot users in the HR department report that they are not members of the HR team. You need to resolve the membership issues for the two pilot users. What should you do? A. Modify the department attribute of both users. B. Invite both users to the HR team. C. Add both users to the HR group. D. Modify the privacy level of the HR team. -

A. Modify the department attribute of both users. They are using dynamic group membership, so the only way is to update the Department attribete for the two users and they should automatically join the team. This is mentioned in the case: "All groups are created by using dynamic group membership that use the department attribute."

You need to ensure that only the members of the company's IT group can create private channels. Which 3 actions should you perform? A. Modify the global teams policy. B. Assign the members of the IT group to the policy. C. Create a custom teams policy. D. Run the Set-TeamsChannel cmdlet. E. Modify the global messaging policy. F. Create a custom messaging policy. -

A. Modify the global teams policy. F. Create a custom teams policy. B. Assign the members of the IT group to the policy. ABC is right but I would actually disagree with this as you don't want to change the global policy, any changes should be done in a custom policy, so I would create two custom policies. I think what they intend here is to prevent users from creating private channels by editing the global teams policy, allowing only IT to create private channels in a custom policy and then applying that policy.

Microsoft Teams users report that they often receive continuous notifications from the Microsoft Teams client for 20 minutes. You need to resolve the notification issues identified during the pilot project. What should you modify? A. the global meeting policy B. the global messaging policy C. the org-wide Teams settings D. the app permission policy -

A. The global messaging policy. Global messaging policy: users can send priority notifications If you turn this on, users can send a message that uses priority notifications. Priority notifications notify users every 2 minutes for a period of 20 minutes or until messages are picked up and read by the recipient, maximizing the likelihood that the message is picked up and acted upon in a timely manner

You plan to implement a toll phone number for the helpdesk. You need to implement the following call features for the helpdesk phone number: ✑ Must include a greeting and hold music ✑ Must bypass menu options when a call is established to the helpdesk. What two resources should you create? A. a call queue B. a call park C. an auto attendant D. a resource account E. a calling policy -

A. a call queue D. a resource account

You plan to implement a toll phone number for the helpdesk. You need to implement the following call features for the helpdesk phone number: ✑ Must include a greeting and hold music ✑ Must bypass menu options when a call is established to the helpdesk. What two resources should you create? A. a call queue B. a call park C. an auto attendant D. a resource account E. a calling policy -

A. a call queue D. a resource account Auto attendant and call queue require a resource account to be associated in order to assign the phone number. There is no requirement for an AutoAttendant. No menu specified. A User calling a Toll Number (i.E. from PSTN) means a licensed Ressource Account is required that carries the phone Number and which is associated to a Call Queue. The CQ has the features required (Greeting and music on Hold, no menu)

You create a team named Room1. You need to ensure that Room1 automatically accepts meeting invitations. The solution must prevent meeting invitations from being accepted if the room is unavailable. How should you complete the PowerShell command? Set-CalendarProcessing -Identity 'Room1' -AutomateProcessing ?Option1? -Allows Conflicts ?Option2? Option1: AutoAccept, AutoProcessing or AutoUpdate Option2: $false, $null, $true -

AutoAccept & False AutoAccept & $false AutoUpdate: Only the Calendar Attendant processes meeting requests and responses. Meeting requests are tentative in the calendar until they're approved by a delegate. Meeting organizers receive only decisions from delegates. AutoAccept: Both the Calendar Attendant and resource booking attendant are enabled on the mailbox. This means that the Calendar Attendant updates the calendar, and then the resource booking assistant accepts the meeting based upon the policies. Eligible meeting organizers receive the decision directly without human intervention (free = accept; busy = decline). The AllowConflicts parameter specifies whether to allow conflicting meeting requests. Valid values are: • $true: Conflicts are allowed. • $false: Conflicts aren't allowed. This is the default value.

All the teams used by the company's legal department must meet the following compliance requirements: ✑ Each team must expire 365 days after it is created. ✑ All team content must be deleted when the team expires. ✑ An administrator must be able to restore deleted team content for 30 days. What should you do? A. From the Microsoft Teams admin center, modify the teams policy. B. From PowerShell, run the New-AzureADMSGroupLifecyclePolicy cmdlet. C. From the Security & Compliance admin center, create a data loss prevention (DLP) policy. D. From the Microsoft 365 admin center, modify the Office 365 group settings. -

B - From PowerShell, run the New-AzureADMSGroupLifecyclePolicy cmdlet. Microsoft 365 Admin center does not allow to change life cycle policy.

The company has a Microsoft Teams group named Group1. You need to remove inactive users from Group1. The members of Group1 must be validated every month. What should you use? A. supervision policies in the Security & Compliance admin center B. access reviews in the Azure Active Directory admin center C. eDiscovery cases in the Security & Compliance admin center D. usage reports in the Microsoft Teams admin center -

B. Access reviews in the Azure Active Directory admin center Azure Active Directory (Azure AD) access reviews enable organizations to efficiently manage group memberships, access to enterprise applications, and role assignments. User's access can be reviewed on a regular basis to make sure only the right people have continued access. https://docs.microsoft.com/en-us/azure/active-directory/governance/access-reviews-overview

Only users in the compliance department of Litware must be able to create teams. You need to implement a solution to meet the Microsoft Teams requirements for the compliance department. What should you do first? A. Add all the compliance department users as members of an org-wide team. B. Add all the compliance department users to a universal security group. C. Add all the compliance department users to an Office 365 group. D. Assign the Teams Communications Support Engineer role to all the compliance department users. -

B. Add all the compliance department users to a universal security group. To put an end to this discussion, read this from the reference article. "Be sure to use a security group to restrict who can create groups. If you try to use a Microsoft 365 group, members won't be able to create a group from SharePoint because it checks for a security group." The only available group types in Azure AD interface are: Security and Office 365. You can also create distribution group via Exchange Admin. No "universal group". Maybe the question is worded wrong. But the answer if NOT office 365 group, so it is B

The company has a main office in Chicago. The company opens a new office in Toronto that has 500 users. You need to ensure that the correct address is available to emergency responders. What should you do? A. Create a configuration profile and assign the profile to the device of each user. B. Add an emergency address, and then modify each phone number. C. Add an emergency address, and then modify each user. D. Create a calling policy and assign the policy to each user. -

B. Add an emergency address, and then modify each phone number.

The company has a main office in Chicago.The company opens a new office in Toronto that has 500 users. You need to ensure that the correct address is available to emergency responders. What should you do? A. Create a configuration profile and assign the profile to the device of each user. B. Add an emergency address, and then modify each phone number. C. Add an emergency address, and then modify each user. D. Create a calling policy and assign the policy to each user. -

B. Add an emergency address, and then modify each phone number.. It's not D because that is regarding calling policy not emergency calling policy. For static mapping , emergency address is tied to the phone number. Dynamic has dependencies on LIS and emergency policies for trunk selection.

A user named User5 cannot establish call from Microsoft Teams. You review the Microsoft Teams client for User5 and discover that the dial pad is unavailable. Other users at the company can establish calls successfully. You need to ensure that User5 can establish calls. Which 2 actions should you perform? A. Modify the caller ID properties of User5. B. Assign a Phone System license to User5. C. Assign a SIP address to User5. D. Assign an app setup policy to User5. E. Enable User5 for Enterprise Voice. -

B. Assign Phone System License E. Enable User5 for Enterprise Voice.

A user named User5 cannot establish call from Microsoft Teams. You review the Microsoft Teams client for User5 and discover that the dial pad is unavailable. Other users at the company can establish calls successfully. You need to ensure that User5 can establish calls. Which 2 actions should you perform? A. Modify the caller ID properties of User5. B. Assign a Phone System license to User5. C. Assign a SIP address to User5. D. Assign an app setup policy to User5. E. Enable User5 for Enterprise Voice. -

B. Assign a Phone System license to User5. E. Enable User5 for Enterprise Voice.

A user invites an external user to join a Microsoft Teams meeting by using a Microsoft Outlook meeting invitation. The external user cannot join the meeting. You need to ensure that all external users can join Microsoft Team meetings. What should you do from the Microsoft Teams admin center? A. From Guest access in the Org-wide settings, set Allow guest access in Microsoft Teams to On. B. Edit the Meeting settings and set Anonymous users can join a meeting to On. C. Edit the global meeting policy and set Allow scheduling private meetings to On. D. Edit the live events policy and set Who can join live events to Everyone. -

B. Edit the Meeting settings and set Anonymous users can join a meeting to On.

All users connect to Skype for Business Online by using computers that run Windows 10. You plan to upgrade all the users from Skype for Business Online to Microsoft Teams. You need to ensure that the Microsoft Teams client is installed automatically on all the computers. What should you do from the Teams admin center? A. From the Messaging policies settings, modify the Global (Org-wide default) messaging policy. B. From Org-wide settings, configure the Teams upgrade settings. C. From Teams apps, add an App setup policy. -

B. From Org-wide settings, configure the Teams upgrade settings. Reference: https://docs.microsoft.com/en-us/microsoftteams/upgrade-to-teams-execute-skypeforbusinessonline

Your company has a Microsoft 365 subscription that uses Microsoft Office 365 E5 licenses and Azure Active Directory Premium Plan 1 licenses. You have a team named Sales that contains all the users in the company's sales department. You hire several new users in the sales department. You discover that the new employees are never added to the team. You need to ensure that when new sales department users are hired, they are added automatically to the team. What should you do? A. From the Microsoft Teams client, modify the settings of the Sales team. B. From the Azure Active Directory admin center, modify the membership type of the Sales group. C. From the Microsoft Teams admin center, modify the properties of the Sales team. D. From the Microsoft 365 admin center, modify the settings of the Sales group. -

B. From the Azure Active Directory admin center, modify the membership type of the Sales group. You change the group type to dynamic.

You attempt to review call quality by location. When you sign in to the Microsoft Call Quality Dashboard, you discover that no locations are defined. You need to ensure that all the call quality information in the dashboard is segmented by location. What should you do first? A. From an administrator's computer, run the Network Testing Companion. B. From the Microsoft Teams admin center, configure reporting labels. C. From the Microsoft Teams admin center, run the Network Planner. D. From PowerShell, run the Set-CsQoEConfiguration cmdlet. -

B. From the Microsoft Teams admin center, configure reporting labels.

All users have a computer that runs Windows 10 and has Microsoft Teams installed. A user reports the following issues: ✑ Users lose their connection during screen sharing. ✑ The user selection process takes too long to complete. ✑ The Microsoft Teams client crashes and restarts automatically. You need to view the Microsoft Teams debug logs to troubleshoot the issues. What should you do? A. From the Microsoft Teams client, select F1. Open the ETL files in the %Appdata%\Microsoft\Teams\folder. B. From the Microsoft Teams client, select Ctrl+Alt+Shift+1. Open the log files in the %Userprofile%\Downloads\ folder. C. From Event Viewer, open the Application log and filter the log for a keyword of MSTeams. D. Right-click the Microsoft Teams icon in the application tray, and then select Get logs. Open Logs.txt in the %Appdata%\Microsoft\Teams\ folder. -

B. From the Microsoft Teams client, select Ctrl+Alt+Shift+1. Open the log files in the %Userprofile%\Downloads\ folder. Ctrl+Alt+Shift+1 is the shortcut for the debug logs. However, to get the media logs you do this: Right-click the Microsoft Teams icon in the application tray, and then select Get logs. Open Logs.txt in the %Appdata%\Microsoft\Teams\ folder.

The company's security policy states that an administrator must be notified when a new team is created by using the Build a team from scratch option. You need to configure the environment to meet the security policy requirement. What should you do? A. From the Security & Compliance admin center, create a supervision policy. B. From the Security & Compliance admin center, create an alert policy. C. From the Azure Active Directory admin center, create a protection notification. D. From the Microsoft Teams admin center, modify the global teams policy. -

B. From the Security & Compliance admin center, create an alert policy. The alert policy can send out alert when a group has been created. In this case creating a team would create an O365 group that will trigger this alert. A: Supervision lets you define policies that capture email and 3rd-party communications in your organization so they can be examined by internal or external reviewers. Reviewers can then classify these communications and make sure they're compliant with your organization's policies. C: Azure AD Identity Protection sends two types of automated notification emails to help you manage user risk and risk detections: • Users at risk detected email • Weekly digest email D: No such capability. Actually answer should be Cloud App Security:

Guest users report that they cannot access files or Microsoft OneNote from Microsoft Teams. The guest users can access channels, chats, and conversations. You need to ensure that the guest users can access the files and OneNote from Microsoft Teams. For what should you configure external sharing? A. Microsoft Teams B. Microsoft SharePoint Online C. Microsoft OneDrive for Business D. Microsoft Yammer. -

B. Microsoft SharePoint Online

Guest users report that they cannot access files or Microsoft OneNote from Microsoft Teams. The guest users can access channels, chats, and conversations. You need to ensure that the guest users can access the files and OneNote from Microsoft Teams. For what should you configure external sharing? A. Microsoft Teams B. Microsoft SharePoint Online C. Microsoft OneDrive for Business D. Microsoft Yammer. -

B. Microsoft SharePoint Online These are guest users not federated users so guest users can only access the files via channels and team chats or conversations where the files are stored on sharepoint. If this is internal, 1 to 1 chat are stored on OneDrive. Teams content such as files, folders, and lists are all stored in SharePoint. In order for guests to have access to these items in Teams, the SharePoint organization-level sharing settings must allow for sharing with guests. The organization-level settings determine what settings are available for individual sites, including sites associated with teams. Site settings cannot be more permissive than the organization-level settings. If you want to allow file and folder sharing with unauthenticated people, choose Anyone. If you want to ensure that all guests have to authenticate, choose New and existing guests. Choose the most permissive setting that will be needed by any site in your organization.

You need to ensure that only the members of the company's IT group can create private channels.Which 3 actions should you perform? A. Create a custom messaging policy. B. Modify the global teams policy. C. Run the Set-TeamsChannel cmdlet. D. Modify the global messaging policy. E. Create a custom teams policy. F. Assign the members of the IT group to the policy. -

B. Modify the global teams policy. E. Create a custom teams policy. F. Assign the members of the IT group to the policy. Set creation of private channesl to 'Off' in the global policy, create a custom policy which allows creation of private channels, assign the policy to the IT group. Done.

You have an Active Directory user named User1. You need to ensure that User1 can view the following reports: ✑ Microsoft Teams user activity report ✑ Microsoft Teams device usage report The solution must limit the ability of User1 to make changes to Microsoft 365 services. Which role should you assign to User1? A. Teams Service Administrator B. Reports reader C. Teams Communications Support Specialist D. Message Center reader -

B. Reports reader. The activity reports can be accessed by users that are assigned: Global admin role Reports reader role Product-specific admin role (Exchange, Skype for Business, or SharePoint)

The company deploys Microsoft Teams for 5,000 users. You need to generate a report that contains the following information: ✑ The number of active Microsoft Teams users during the last seven days. ✑ The number of active team channels during the last seven days. Which usage reports should you run? A. Teams live event usage B. Teams usage C. Teams user activity D. Teams device usage -

B. Teams usage. The Teams usage report in the Microsoft Teams admin center gives you an overview of the usage activity in Teams, including the number of active users and channels.

Guest users must be prevented from making private calls. You need to configure the environment to meet the technical requirements for guest users. What should you modify from the Microsoft Teams admin center? A. the global app permission policy B. the Org-wide settings C. the global meeting policy D. the global messaging policy -

B. The Org-wide settings. In Org-wide settings - Guest access, you can disable the ability to make private calls. The operative word being "technical" as guests have other requirements for live events but these are not relevant to the question.

The Microsoft 365 tenant uses a domain named contoso.com. You need to ensure that team channels can receive email only from users in the company and email addresses that use an email domain named @fabrikam.com. What should you modify? A. the External collaboration settings in the Azure Active Directory admin center B. the list of accepted domains in Microsoft Exchange Online C. the org-wide Teams settings D. the global teams policy -

C. The org-wide Teams settings. Org-wide setting- >Teams Settings->Email integration. The question is asking where you go to limit emails to the channels to the internal domain and @fabrikam.com. You do this in org-wide settings\External access - you just add the domains to the list. If nothing is in the list then it will allow any email into the channel.

You need to create an auto attendant from the Microsoft Teams admin center. Which object must be associated to the auto attendant? A. a Calling Plan B. a conferencing bridge C. a resource account D. a shared mailbox -

C. A resource account. "Every auto attendant is required to have an associated resource account. You must create the resource account first, then you can associate it to the auto attendant."

You have an org wide team named Team1. The members of Team1 report that they receive an excessive amount of notifications from channel messages. You need to reduce the amount of notifications by implementing the following changes: ✑ Allow only global administrators to create new posts in the General channel. ✑ Prevent @members for the org-wide team members. Which 2 actions should you perform from the Microsoft Teams client? A. From the Team1 settings, disable all the Fun stuff settings. B. From the Team1 settings, set Show members the option to @team or @[team name] to Off. C. From the General Channel settings of Team1, set the channel moderation preference to Only owners can post messages. D. From the Team1 settings, clear Give members the option to edit their messages. E. From the General Channel settings of Team1, set the channel moderation preference to Anyone can post; show alert that postings will notify everyone (recommended for large teams). -

C. From the General Channel settings of Team1, set the channel moderation preference to Only owners can post messages. D. From the Team1 settings, set Show members the option to @team or @[team name] to Off.

You have an org wide team named Team1. The members of Team1 report that they receive an excessive amount of notifications from channel messages. You need to reduce the amount of notifications by implementing the following changes: ✑ Allow only global administrators to create new posts in the General channel. ✑ Prevent @members for the org-wide team members. Which 2 actions should you perform from the Microsoft Teams client? A. From the Team1 settings, clear Give members the option to edit their messages. B. From the General Channel settings of Team1, set the channel moderation preference to Anyone can post; show alert that postings will notify everyone (recommended for large teams). C. From the General Channel settings of Team1, set the channel moderation preference to Only owners can post messages. D. From the Team1 settings, disable all the Fun stuff settings. E. From the Team1 settings, set Show members the option to @team or @[team name] to Off. -

C. From the General Channel settings of Team1, set the channel moderation preference to Only owners can post messages. D. From the Team1 settings, set Show members the option to @team or @[team name] to Off. "I agree with this only if the requirement is to allow only owners to create new posts, not global administrators." Allow only team owners to post to the General channel Reduce channel noise by having only team owners post to the General channel. Go to the team and click ˙˙˙ More options > Manage Team. On the Settings tab, click Member permissions > select Only owners can post messages. Turn off @team and @[team name] mentions Reduce @mentions to keep them from overloading the entire organization. Go to the team and click ˙˙˙ More options > Manage Team. On the Settings tab, click @mentions > turn off Show members the option to @team or @[team name].

All users have a computer that runs Windows 10 and has Microsoft Teams installed. A user reports the following issues: ✑ Users lose their connection during screen sharing. ✑ The user selection process takes too long to complete. ✑ The Microsoft Teams client crashes and restarts automatically. You need to view the Microsoft Teams debug logs to troubleshoot the issues. What should you do? A. Right-click the Microsoft Teams icon in the application tray, and then select Get logs. Open Logs.txt in the %Appdata%\Microsoft\Teams\ folder. B. From Event Viewer, open the Application log and filter the log for a keyword of MSTeams. C. From the Microsoft Teams client, select Ctrl+Alt+Shift+1. Open the log files in the %Userprofile%\Downloads\ folder. D. From the Microsoft Teams client, select F1. Open the ETL files in the %Appdata%\Microsoft\Teams\folder. -

C. From the Microsoft Teams client, select Ctrl+Alt+Shift+1. Open the log files in the %Userprofile%\Downloads\ folder. Ctrl+Alt+Shift+1 is the shortcut for the debug logs. However, to get the media logs you do this: Right-click the Microsoft Teams icon in the application tray, and then select Get logs. Open Logs.txt in the %Appdata%\Microsoft\Teams\ folder.

You need to ensure that only Microsoft apps can be used in Microsoft Teams. What should you do from the Microsoft Teams admin center? A. From the global app setup policy, disable the Upload custom apps setting. B. From the Org-wide app settings, disable the Allow interaction with custom apps setting. C. From the Org-wide app settings, disable the Allow third party or custom apps setting. D. From the global app permission policy, enable the Allow All Apps setting for Microsoft apps. -

C. From the Org-wide app settings, disable the Allow third party or custom apps setting. The distinction comes in with how Microsoft defines Custom App vs 3rd party app. Custom app is added outside of the microsoft store, 3rd party app is a non microsoft app from the microsoft store. Also this "This setting overrides the user and team custom app policy and setting. It's intended to serve as a master on/off switch during security events" is why its not, D.

The company's security policy states that an administrator must be notified when a new team is created by using the Build a team from scratch option. You need to configure the environment to meet the security policy requirement. What should you do? A. From the Microsoft Teams admin center, modify the global teams policy. B. From the Azure Active Directory admin center, create a protection notification. C. From the Security & Compliance admin center, create an alert policy. D. From the Security & Compliance admin center, create a supervision policy. -

C. From the Security & Compliance admin center, create an alert policy.

You enable guest access for Microsoft Teams. You need to prevent all users from downloading and opening files that contain malware by using Microsoft Teams channels. What should you do first? A. From the Security & Compliance admin center, create a data loss prevention (DLP) policy. B. From the Azure Active Directory admin center, enable the End user protection baseline policy. C. From the Security & Compliance admin center, select Turn on ATP for SharePoint, OneDrive, and Microsoft Teams. D. From the Azure Active Directory admin center, add an identity provider. -

C. From the Security & Compliance admin center, select Turn on ATP for SharePoint, OneDrive, and Microsoft Teams. ATP = Advanced Threat Protection https://docs.microsoft.com/en-us/microsoft-365/security/office-365-security/turn-on-atp-for-spo-odb-and-teams?view=o365-worldwide

You need to prevent users from using Microsoft Teams to communicate with users in a partner company that uses an email domain named litewareinc.com. What should you do from the Microsoft Teams admin center? A. Turn off guest access. B. Create a new messaging policy. C. Modify the External access settings. D. Create a new meeting policy. -

C. Modify the External access settings. Blocking the domain in the External Access settings does the trick.

The Microsoft 365 tenant uses a domain named contoso.com. You need to ensure that team channels can receive email only from users in the company and email addresses that use an email domain named @fabrikam.com. What should you modify? A. the list of accepted domains in Microsoft Exchange Online B. the global teams policy C. the org-wide Teams settings D. the External collaboration settings in the Azure Active Directory admin center -

C. The org-wide Teams settings. Org-wide setting- >Teams Settings->Email integration.

The company plans to host Microsoft Teams live events for groups of users larger than 5,000. You need to recommend a solution that minimizes the bandwidth required to stream the events. What should you include in the recommendation? A. a Session Border Controller (SBC) B. a third-party encoder C. an eCDN provider D. a Cloud Video Interop (CVI) -

C. an eCDN provider

The company plans to host Microsoft Teams live events for groups of users larger than 5,000. You need to recommend a solution that minimizes the bandwidth required to stream the events. What should you include in the recommendation? A. a Session Border Controller (SBC) B. a third-party encoder C. an eCDN provider D. a Cloud Video Interop (CVI) -

C. an eCDN provider Session Border Controller is a network function which secures voice over IP. Enterprise Content Delivery Network (eCDN) scales video delivery. Cloud Video Interop (CVI) enables third-party meeting rooms (telepresence) and personal video devices (VTCs) to join Microsoft Teams meetings.

Several users report poor call quality. You need to ensure that a user named Admin5 can review the call quality metrics of all the users at the company. The solution must use the principle of least privilege. Which role should you assign to Admin5? A. Teams Service Administrator B. Teams Communications Support Engineer C. Teams Communications Support Specialist D. Teams Communications Administrator -

COULD BE VERY WRONG Teams Communications Support Engineer

You have a team that uses the following dynamic rule.(user.department -contains "Sales" -or user.department -contains "Marketing") -and (user.userType -Contains "Guest") - and (user.country -eq "US") Which user will be included in the group? A. A guest user in a department named Global Sales that has the country attribute set to USA. B. A member user in a department named Marketing Division that has the country attribute set to USA. C. A member user in a department named Marketing/Sales that has the country attribute set to US. D. A guest user in a department named US Marketing Division that has the country attribute set to US. -

COULD BE WRONG A guest user in a department named US Marketing Division that has the country attribute set to US. It is a guest user, Marketing is contained and the "US" matches. -contains allows the Guest as the word "Marketing" is contained within the Dept. -match is for regular expressions e.g. Wildcards.

To meet the company's compliance policy, users in the sales department must continue to use on-premises Skype for Business for IM and calling only. You need to configure the user accounts of the sales department users to meet the security requirements. What should you do for each user? A. From the Microsoft Teams admin center, set the Microsoft Teams upgrade policy to Skype for Business with Teams collaboration and meetings coexistence mode. B. From PowerShell, run the Grant-CsTeamsUpgradePolicy -PolicyName SfBWithTeamsCollab cmdlet. C. From PowerShell, run the Grant-CsTeamsUpgradePolicy -PolicyName Islands cmdlet. D. From the Microsoft Teams admin center, set the Microsoft Teams upgrade policy to Skype for Business coexistence mode. -

COULD BE WRONG A. From the Microsoft Teams admin center, set the Microsoft Teams upgrade policy to Skype for Business with Teams collaboration and meetings coexistence mode. A This is the same as setting the policyname to SfBWithTeamsCollabAndMeetings using powershell. B: This will allow the Skype for Business to have meetings and presence which is not what the question asked. The correct policy should be SfBWithTeamsCollabAndMeetings which will disable meeting on Skype. C: This allow user to have everything turned on side by side which is not what the question asked. D: Still able to do meetings. https://docs.microsoft.com/en-us/powershell/module/skype/grant-csteamsupgradepolicy?view=skype-ps

For the sales department, Litware plans to create a team that dynamically updates its membership when users leave and join the department. You need to create a team for the sales department. What should you do first? A. Create an Office 365 group and modify the membership rule for the group. B. From PowerShell, run the Add-AzureAdGroupMember cmdlet. C. From PowerShell, run the New-Team cmdlet. D. Create a team and select Build a team from scratch. Topic 9-32 -

COULD BE WRONG Create an Office 365 group and modify the membership rule for the group. The question only asks what to do first, where a group with dynamic membership will be fine. It is not about who can, it is about what to do first (as admin). And the best approach in this case is to start with an O365 Group with a membership rule to be sure that all sales members are added as team member, when creating the team based on the O365 Group in the NEXT step.

Your company has five offices. Each office has a unique phone number. You plan to deploy Phone System to all the offices. You need to ensure that each office has a unique greeting message for the weekdays and a unique greeting message for the weekends. The solution must minimize administrative effort. What should you create? A. one auto attendant that contains all five phone numbers B. one call queue that contains all five phone numbers C. five auto attendants that each contains one phone number D. five call queues that each contains one phone number -

COULD BE WRONG Five auto attendants that each contains one phone number. 1. We need to have different Greetings (not the A and the B) 2. We need another greeting for Days off (Not the D - Queue does not have this option). In this question, each office wants to have different top-level or entry auto attendant, they need 5 AAs.

To meet the company's compliance policy, users in the sales department must continue to use on-premises Skype for Business for IM and calling only. You need to configure the user accounts of the sales department users to meet the security requirements. What should you do for each user? A. From the Microsoft Teams admin center, set the Microsoft Teams upgrade policy to Skype for Business with Teams collaboration and meetings coexistence mode. B. From PowerShell, run the Grant-CsTeamsUpgradePolicy -PolicyName SfBWithTeamsCollab cmdlet. C. From PowerShell, run the Grant-CsTeamsUpgradePolicy -PolicyName Islands cmdlet. D. From the Microsoft Teams admin center, set the Microsoft Teams upgrade policy to Skype for Business only coexistence mode. E. From PowerShell, run the Grant-CsTeamsUpgradePolicy -PolicyName SfBWithTeamsCollabAndMeeting cmdlet. -

COULD BE WRONG From the Microsoft Teams admin center, set the Microsoft Teams upgrade policy to Skype for Business with Teams collaboration and meetings coexistence mode. While E is a correct answer, you have to factor into account, that the Case study states to minimize administrative effort. Since there is no other requirement that would require the Tenants TeamsUpgrade settings to be kept at SfbOnly, option A is the option with the least administrative overhead.

When making voice calls from Microsoft Teams, users report poor call quality at specific times of the day. You need to verify whether Quality of Service (QoS) is being applied to the calls. What should you use? A. the Microsoft Teams client B. Network Monitor C. Microsoft Call Quality Dashboard D. Network Testing Companion -

COULD BE WRONG Network Monitor

When making voice calls from Microsoft Teams, users report poor call quality at specific times of the day. You need to verify whether Quality of Service (QoS) is being applied to the calls.What should you use? A. the Microsoft Teams client B. Microsoft Call Quality Dashboard C. Network Testing Companion D. Network Monitor -

COULD BE WRONG Network Monitor. D is... sort of right, except reference to NetMon has been removed from that URL. The cached version talks a lot about using Network Monitor to validate QOS tho https://webcache.googleusercontent.com/search?q=cache:mE9ksypuzfYJ:https://docs.microsoft.com/en-us/microsoftteams/qos-in-teams+&cd=2&hl=en&ct=clnk&gl=nz Validate your QoS implementation For QoS to be effective, the DSCP value set by the Group Policy object needs to be present at both ends of a call. By analyzing the traffic generated by the Teams client, you can verify that the DSCP value isn't changed or stripped out when the Teams workload traffic moves through the network. Preferably, you capture traffic at the network egress point. You can use port mirroring on a switch or router to help with this. <-- this suggest the Network Monitor

Your company has 10 offices in North America and Europe. The company has 5,000 users. You plan to deploy Microsoft Teams for all the users. You run a pilot project for the planned deployment. You need to identify the network packet loss from the pilot computers to Microsoft Teams during calls. Solution: You run the Network Testing Companion. Does this meet the goal? -

COULD BE WRONG No --- The tool is for SfB Teams users Network Planner. The Network Testing Companion is something I would run to test the environment/endpoints before rolling out Teams. CQD would be the go to after the deployment to determine Packet Loss Yes -- Network Testing Companion->Start Tests->View Results->Network quality/Network connectivity And it can be used for Skype for business as well for Teams

Your company has 10 offices in North America and Europe. The company has 5,000 users. You plan to deploy Microsoft Teams for all the users. You run a pilot project for the planned deployment. You need to identify the network packet loss from the pilot computers to Microsoft Teams during calls. Solution: From the Microsoft Teams admin center, you review the Microsoft Call Quality Dashboard. Does this meet the goal? -

COULD BE WRONG No, because it is required to be done DURING call which would mean a Network Monitor is required like a Wireshark

✑ Only guest users from specific domains must be allowed to connect to collaborate by using Microsoft Teams. ✑ Guest users must be prevented from inviting other guests. You need to recommend a solution to meet the security policy requirements. Solution: From the Azure Active Directory, you modify the external collaboration settings. Does this meet the goal? -

COULD BE WRONG No. Guest settings like these can be controlled via Azure AD -> Users -> User Settings - > External Users - > Manage external collaboration settings

You plan to implement a pilot project on Phone System for 100 users. The pilot project will use a Microsoft Calling Plan. You need to ensure that the users can establish calls to the PSTN. Which cmdlets should you run? A. Set-AzureADUserLicense, Set-CSUser, and Set-AzureADUser B. Grant-CsOnlineVoiceRoutingPolicy, Set-CsOnlineVoiceUser, and Set-CSUser C. Set-AzureADUser, Grant-CsOnlineVoiceRoutingPolicy, and Set-CsOnlineVoiceUser D. Set-AzureADUserLicense, Set-CsOnlineVoiceUser, and Set-CSUser -

COULD BE WRONG Set-AzureADUserLicense, Set-CsOnlineVoiceUser, and Set-CSUser Assign license, assign number and emergency location, enable for enterprise voice. Grant-CsOnlineVoiceRoutingPolicy is only for Direct Routing and the question says they are using a Microsoft Calling Plan.

You need to prevent guest users in the tenant from using cameras during Microsoft Teams meetings. Solution: From the Azure Active Directory admin center, you modify the external collaboration settings. Does this meet the goal? -

COULD BE WRONG, CONFIRM No.

You need to prevent guest users in the tenant from using cameras during Microsoft Teams meetings. Solution: From Microsoft Teams admin center, you modify the external collaboration settings. Does this meet the goal? -

COULD BE WRONG, CONFIRM No.

You need to prevent guest users in the tenant from using cameras during Microsoft Teams meetings. Solution: From the Microsoft 365 admin center, you modify the Sharing settings. Does this meet the goal? -

COULD BE WRONG, CONFIRM No. Allowing IP-Video for guest users can be done in "MS Teams admin center -> Org-wide settings -> Guest access -> Allow IP video". There are no "sharing settings" in the M365 admin center. By going to "Microsoft 365 admin center -> Settings -> Org settings -> Security & privacy", there is a "Sharing" setting. But it's to determine whether only admins or all users can add guest.

The company's Microsoft Teams upgrade policy is set to Islands coexistence mode. The company plans to maintain the coexistence mode for several months. Several users report that they receive email messages about missed chat conversations. You need to recommend a solution to ensure that all the users receive chat messages. Which 2 actions should you recommend? A. Install the Microsoft Teams clients on all the computers that run the Skype for Business client. Instruct the users to sign in to both client applications. B. Instruct the users to modify the permissions in the Microsoft Teams client. C. Modify the global app setup policy. D. Modify the global app permission policy. E. Install the Skype for Business client on all the computers that run the Microsoft Teams client. Instruct the users to sign in to both client applications. -

COULD BE WRONG. Install the Microsoft Teams clients on all the computers that run the Skype for Business client. Instruct the users to sign in to both client applications. Install the Skype for Business client on all the computers that run the Microsoft Teams client. Instruct the users to sign in to both client applications. Instruct the users to modify the permissions in the Microsoft Teams client: Not possible. Modify the global app setup policy: This setup the Teams app look and feel like pinned apps. Modify the global app permission policy: This blocks the app not the coexistence.

You need to create an auto attendant from the Microsoft Teams admin center. Which object must be associated to the auto attendant? A. a conferencing bridge B. a shared mailbox C. a Calling Plan D. a resource account -

D. A resource account. "Every auto attendant is required to have an associated resource account. You must create the resource account first, then you can associate it to the auto attendant."

Your company has a Microsoft 365 subscription that contains a team named Sales. You need to recommend a solution to ensure that all guest users who are members of Sales receive an email message each year to verify that they want to remain in the team. What should you include in the recommendation? A. an identity provider B. a Microsoft Outlook add-in C. a supervision policy D. an access review -

D. An access review. Azure Active Directory (Azure AD) access reviews enable organizations to efficiently manage group memberships, access to enterprise applications, and role assignments. User's access can be reviewed on a regular basis to make sure only the right people have continued access.

Windows 10 computers are joined to Azure AD and in Intune. You need to deploy the Microsoft Teams client to the computers. What should you use? A. an Azure AD app registration B. a domain-based Group Policy Object (GPO) C. Azure App Service D. an app in Microsoft Intune -

D. An app in Microsoft Intune. Although you can install it using a GPO, Intune is the better answer. It specifies that all machines are domain joined and managed by Intune. Using a GPO to install won't provide information if the install fails. Intune will. It's the better choice if available. Furthermore, Azure AD technically does not have Group Policy. It's Azure AD joined so you cannot use GPO. Only a Hybrid Azure AD Join can utilize a GPO.

All the teams used by the company's legal department must meet the following compliance requirements: ✑ Each team must expire 365 days after it is created. ✑ All team content must be deleted when the team expires. ✑ An administrator must be able to restore deleted team content for 30 days. What should you do? A. From the Security & Compliance admin center, create a data loss prevention (DLP) policy. B. From the Microsoft Teams admin center, modify the teams policy. C. From the Microsoft 365 admin center, modify the Office 365 group settings. D. From PowerShell, run the New-AzureADMSGroupLifecyclePolicy cmdlet. -

D. From PowerShell, run the New-AzureADMSGroupLifecyclePolicy cmdlet. Microsoft 365 Admin center does not allow to change life cycle policy.

Your company has a Microsoft 365 subscription that contains 200 Microsoft Teams users and 20 teams. You discover that several teams do NOT have an owner. You need to ensure that you receive a notification when a team is missing an owner. What should you do? A. From PowerShell, run the Set-Team cmdlet. B. From the Microsoft Teams admin center, modify the Teams settings. C. From PowerShell, run the Add-AzureADMSLifecyclePolicyGroup cmdlet. D. From the Azure Active Directory admin center, modify the group expiration settings. -

D. From the Azure Active Directory admin center, modify the group expiration settings. This can be only set-up in AAD. Just checked Azure AD group settings and there is an option to send an email to an address of your choice if there are groups without Owners "Email contact for groups with no owners"

You have an Active Directory user named User1. You need to ensure that User1 can view the following reports: ✑ Microsoft Teams user activity report ✑ Microsoft Teams device usage report The solution must limit the ability of User1 to make changes to Microsoft 365 services. Which role should you assign to User1? A. Teams Communications Support Specialist B. Teams Service Administrator C. Message Center reader D. Reports reader -

D. Reports reader

The company deploys Microsoft Teams for 5,000 users. You need to generate a report that contains the following information: ✑ The number of active Microsoft Teams users during the last seven days. ✑ The number of active team channels during the last seven days. Which usage reports should you run? A. Teams device usage B. Teams live event usage C. Teams user activity D. Teams usage -

D. Teams usage. The Teams usage report in the Microsoft Teams admin center gives you an overview of the usage activity in Teams, including the number of active users and channels.

Your network contains an on-premises Active Directory domain that syncs to a Microsoft 365 subscription. From the Microsoft Teams client, you create a new team named Sales. You need to ensure that the team includes all users in the company's sales department. The solution must ensure that the new employees hired for the sales department are added automatically to the team. Which tool should you use to configure the membership of the Sales group? A. Active Directory Users and Computers B. the Microsoft 365 admin center C. Azure AD Connect D. the Azure Active Directory admin center -

D. The Azure Active Directory admin center. Static groups can be changed to dynamic groups in the AAD Admin Center.

The company has the departments and teams shown in the following table. Department name, Team Name Sales, Team1 Reserach and Development, Team2 Finance, Team3 You need to recommend a solution to prevent the users in each department from inviting users from other departments to their team. What should you include in the recommendation? A. app permission policies B. Azure Information Protection C. supervision policies D. information barrier policies -

D. information barrier policies A user in Team1 will simply not show up in the user search of Team2 or Team3, so that he can't be added.

The company has the departments and teams shown in the following table. Department name, Team Name Sales, Team1 Reserach and Development, Team2 Finance, Team3 You need to recommend a solution to prevent the users in each department from inviting users from other departments to their team. What should you include in the recommendation? A. supervision policies B. Azure Information Protection C. app permission policies D. information barrier policies -

D. information barrier policies A user in Team1 will simply not show up in the user search of Team2 or Team3, so that he can't be added.

You enable guest access for Microsoft Teams. You need to prevent all users from downloading and opening files that contain malware by using Microsoft Teams channels. What should you do first? A. From the Azure Active Directory admin center, add an identity provider. B. From the Security & Compliance admin center, select Turn on ATP for SharePoint, OneDrive, and Microsoft Teams. C. From the Azure Active Directory admin center, enable the End user protection baseline policy. D. From the Security & Compliance admin center, create a data loss prevention (DLP) policy. -

From the Security & Compliance admin center, select Turn on ATP for SharePoint, OneDrive, and Microsoft Teams. ATP = Advanced Threat Protection https://docs.microsoft.com/en-us/microsoft-365/security/office-365-security/turn-on-atp-for-spo-odb-and-teams?view=o365-worldwide

The company has a group named Sales. You need to configure Microsoft Teams for the Sales group. The solution must meet the following requirements: ✑ Ensure that only the Activity, Shifts, Chat, and Calling apps are always visible in the app bar of the Microsoft Teams client. ✑ Prevent only the users in the company's sales department from adding other apps to Microsoft Teams. Which 2 actions should you perform? A. Modify the global app setup policy. B. Modify the global app permission policy. C. Create an app setup policy. D. Modify the org-wide Teams settings. E. Create an app permission policy. -

MAY BE WRONG C. Create an app setup policy. E. Create an app permission policy. You can edit the settings in the global policy to include the apps that you want. If you want to customize Teams for different groups of users in your organization, create and assign one or more custom policies. I think the sentence "You need to configure Microsoft Teams for the Sales group." is crucial. So the right answer is C & E. A is a global policy and for all Groups in Teams relevant -> so it is not A.

Users in the R&D group must be prevented from sending chat messages to users in other departments. You need to configure the environment to meet the security requirements for the R&D group.What should you do first? A. Start the information barrier policy application. B. Add an identity provider. C. Create two information barrier segments. D. Create one information barrier policy. -

MAY BE WRONG C. Create two information barrier segments. Create information barrier segments first, then create information barrier policy based on the segments then start the information barrier application.

Team names must be prevented from containing the name of any products produced by Contoso. You need to configure the environment to meet the security requirements for team names. What should you do? A. From the Security & Compliance admin center, create a sensitivity label and a sensitivity policy. B. From the Microsoft Teams admin center, modify the Teams setting policies. C. From the Azure Active Directory admin center, upload a blocked word list for the group naming policy. -

NO DISCUSSION From the Azure Active Directory admin center, upload a blocked word list for the group naming policy.

Users in the company's sales department frequently invite guest users to meetings. You need to ensure that when the sales department users invite guest users to meetings, the guest users are admitted by default. The solution must only apply to the sales department users. Which 2 actions should you perform? A. In the global meeting policy, set Automatically admit users to Everyone. B. Create a new meeting policy and set Automatically admit users to Everyone. C. Apply the policy to the sales department users. D. In the global meeting policy, set Automatically admit users to Everyone in your organization. -

NO DISCUSSION, SCARY Create a new meeting policy and set Automatically admit users to Everyone. Apply the policy to the sales department users. Reference:https://docs.microsoft.com/en-us/microsoftteams/meeting-policies-in-teamsManage Chat, Calling, and Meetings

You plan to enable users to book meetings in several of the company's conference rooms by using the Microsoft Teams client. You need to create the required resources in Microsoft 365 for the conference rooms.What should you create for each conference room? A. a team B. a resource mailbox C. an auto attendant D. an Office 365 group -

NO DISCUSSION, SCARY A resource mailbox. Reference:https://docs.microsoft.com/en-us/microsoftteams/rooms/rooms-deploy

You create an org-wide team named Team1. You need to configure Team1 to meet following requirements: ✑ Ensure that only the three global administrators to create new posts in the General channel. ✑ Prevent @mentions for the org-wide team members. Which 2 actions should you perform from the Microsoft Teams client? A. From the Team1 settings, clear Give members the option to edit their messages. B. From the General Channel settings of Team1, set the channel moderation preference to Anyone can post; show alert that postings will notify everyone (recommended for large teams). C. From the General Channel settings of Team1, set the channel moderation preference to Only owners can post messages. D. From the Team1 settings, disable all the Fun stuff settings. E. From the Team1 settings, set Show members the option to @team or @[team name] to Off. -

NO DISCUSSION, SCARY From the General Channel settings of Team1, set the channel moderation preference to Only owners can post messages. From the Team1 settings, set Show members the option to @team or @[team name] to Off. Reference:https://docs.microsoft.com/en-us/microsoftteams/create-an-org-wide-team

You purchase an app named Appl from the Microsoft Teams Store. You need to add App1 to the Microsoft Teams client for a specific group of users. Which 2 actions should you perform from the Microsoft Teams admin center? A. From the Meeting settings, modify the Network settings. B. From App setup policies, create a new app setup policy. C. From App setup policies, modify the global app setup policy. D. From the properties of each user, edit the assigned policies. E. From the Org-wide settings, modify the Devices settings. -

NO DISCUSSION. SCARY. - From App setup policies, create a new app setup policy. - From the properties of each user, edit the assigned policies.

You purchase an app named Appl from the Microsoft Teams Store. You need to add App1 to the Microsoft Teams client for a specific group of users. Which 2 actions should you perform from the Microsoft Teams admin center? A. From the Meeting settings, modify the Network settings. B. From the Org-wide settings, modify the Devices settings. C. From the properties of each user, edit the assigned policies. D. From App setup policies, modify the global app setup policy. E. From App setup policies, create a new app setup policy. -

NO DISCUSSION. SCARY. - From App setup policies, create a new app setup policy. - From the properties of each user, edit the assigned policies.

The company creates a new Microsoft Teams app named App1. A developer packages App1 as a ZIP file. You need to ensure that App1 can be uploaded as a ZIP package to Microsoft Teams. Which Apps setting should you turn on? A. Allow uploading custom apps. B. Enable new external apps by default. C. Enable default apps. D. Allow external apps in Microsoft Teams. -

NO DISCUSSION. SCARY. Allow uploading custom apps. Reference:https://docs.microsoft.com/en-us/microsoftteams/platform/concepts/deploy-and-publish/overviewManage Teams and App Policies

You have a Microsoft 365 subscription that contains several Microsoft SharePoint Online sites. You need to ensure that the content stored in a SharePoint modern team site named Sales is available from Microsoft Teams. The solution must ensure that when a new channel is added to a team, a folder for the channel is created in the Sales site. Solution: From a team, you add a tab for the Sales site. Does this meet the goal? -

POSSIBLY WRONG No. Creating a modern SP Team Site does not create a Team Adding an additional SharePoint site or document library as a tab in teams will not create folders when a channel is created in the newly added sales site. Whilst the Sales site will not be available, It will continue to create folders in the original site, not the sales site.

✑ Only guest users from specific domains must be allowed to connect to collaborate by using Microsoft Teams. ✑ Guest users must be prevented from inviting other guests. You need to recommend a solution to meet the security policy requirements. Solution: From PowerShell, you run the New-AzureADPolicy and Set-AzureADPolicy cmdlets. Does this meet the goal? -

No because with those commandlets, you CANNOT prevent guests from inviting other guests, so the answer is No.

Your company has a Microsoft 365 subscription and a Virtual Desktop Infrastructure (VDI) solution. The company's Microsoft Teams upgrade policy is set to Teams only coexistence mode. You deploy the Microsoft Installer (MSI) package for Microsoft Teams to the VDI solution. Several months later, users of the VDI solution report that their workstation is missing several new Microsoft Teams features. You need to ensure that the VDI solution users can use the new Microsoft Teams features. Solution: You run the Grant-CsTeamsUpgradePolicy cmdlet and specify the -PolicyName parameter. Does this meet the goal? -

No.

Your company has a Microsoft 365 subscription and a Virtual Desktop Infrastructure (VDI) solution.The company's Microsoft Teams upgrade policy is set to Teams only coexistence mode. You deploy the Microsoft Installer (MSI) package for Microsoft Teams to the VDI solution. Several months later, users of the VDI solution report that their workstation is missing several new Microsoft Teams features. You need to ensure that the VDI solution users can use the new Microsoft Teams features. Solution: You run the Get-WUInstall cmdlet and specify the -AcceptAll parameter. Does this meet the goal? -

No. Get-WUInstall is for Windows updates, not the Teams client.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your company has 10 offices in North America and Europe.The company has 5,000 users. You plan to deploy Microsoft Teams for all the users. You run a pilot project for the planned deployment. You need to identify the network packet loss from the pilot computers to Microsoft Teams during calls. Solution: From the Microsoft Teams admin center, you select Analytics & reports. Does this meet the goal? -

No. This is to get insights how Teams used in organization. Reference:https://docs.microsoft.com/en-us/microsoftteams/turning-on-and-using-call-quality-dashboard

You need to prevent a user named User1 from permanently deleting private chats in Microsoft Teams. Solution: You create an In-Place Hold for the Microsoft SharePoint site used by Microsoft Team. Does this meet the goal? -

No. Chats are not stored on SharePoint. It is stored either on the personal mailbox or group mailbox. Only files are stored into OneDrive\Sharepoint depending on whether it is private or group\channel chats.

✑ Only guest users from specific domains must be allowed to connect to collaborate by using Microsoft Teams .✑ Guest users must be prevented from inviting other guests. You need to recommend a solution to meet the security policy requirements. Solution: From the Microsoft Teams admin center, you modify the global meeting policy. Does this meet the goal? -

No. Guest settings like these can be controlled via Azure AD -> Users -> User Settings - > External Users - > Manage external collaboration settings

You need to prevent a user named User1 from permanently deleting private chats in Microsoft Teams. Solution: You place the group mailboxes used by Microsoft Teams on Litigation Hold. Does this meet the goal? -

No. Private chats are maintained in private mailboxes, hence the group mailboxes are not impacted

You need to ensure that the content stored in a SharePoint modern team site named Sales is available from Microsoft Teams. The solution must ensure that when a new channel is added to a team, a folder for the channel is created in the Sales site. Solution: From the Sales site, you use the Create a Team option. Does this meet the goal? -

POSSIBLY WRONG Yes. This will create a Team that uses the Sales site as storage. Ceating a SP Team Site does not create a Team, so you need to create a team with the option provided in SP Team Site to create a team or use Teams client to create a new team from O365 group greated for the SP site.

You need to ensure that the content stored in a SharePoint modern team site named Sales is available from Microsoft Teams. The solution must ensure that when a new channel is added to a team, a folder for the channel is created in the Sales site. Solution: From the Microsoft Teams client, you create a new team and select Create from an existing Office 365 group or team. Does this meet the goal? -

POSSIBLY WRONG Yes. Modern online Team Sites have an Office 365 group. If a Team is created from that group then the site behind it becomes the file storage for that Team. When new channels are added a folder will be created.

You need to ensure that a team named Team1 is identified as Highly Confidential in the Microsoft Teams client. What should you use? A. a classification label in the Azure Active Directory admin center B. a sensitivity label in the Security & Compliance admin center C. a supervisor policy in the Security & Compliance admin center D. a teams policy in the Microsoft Teams admin center -

POSSIBLY WRONG, CGRAFF WHAT DO YOU THINK B - A sensitivity label in the Security & Compliance admin center. Confusingly, these are actually called "sensitivity labels", not classification labels, but are configurable within AAD admin center after deploying from MIP. You can use both classification and sensitivity labels in Teams, the question only asked about identifying the content (classification) not protecting the content (sensitivity).

The network contains the following devices: ✑ 100 computers that run Windows 10 ✑ 50 Android devices ✑ 50 iPhone devices All the devices have the Skype for Business app installed. You need to deploy Microsoft Teams to all the devices. What should you do? A. From the Microsoft Teams admin center, set Download the Teams app in the background for Skype for Business users to On. B. Create a Group Policy Object (GPO) that contains an app package, and then link the GPO. C. From the Microsoft Teams admin center, create an app setup policy that includes the Microsoft Teams app, and then assign the policy to all users. D. From the Microsoft Intune, push Microsoft Teams to all the devices. -

POSSIBLY WRONG: D - From the Microsoft Intune, push Microsoft Teams to all the devices.

You recently set the company's Microsoft Teams upgrade policy to Teams only coexistence mode. A user reports that several online meetings are configured to use Microsoft Skype for Business. You need to convert the online meetings in the user's calendar to use Microsoft Teams. What are 2 possible ways to achieve the goal? A. From PowerShell, run the Start-CsExMeetingMigration cmdlet and specify the -identity parameter. B. Run the Skype for Business Meeting Update tool. C. From the Microsoft Teams admin center, modify the meeting policy. D. From PowerShell, run the Set-CsTeamsUpgradeConfiguration cmdlet. E. From the Microsoft Teams admin center, modify the Microsoft Teams upgrade policy. TOPIC 9 - 26 -

WIDESPREAD DISAGREEMENT From PowerShell, run the Start-CsExMeetingMigration cmdlet and specify the -identity parameter. Run the Skype for Business Meeting Update tool.

You need to ensure that users from a partner company named Contoso, Ltd. can collaborate with your company's users in teams. The solution must ensure that the Contoso users can exchange chat messages in channels. Which 3 actions should you perform before you add the Contoso users to teams? A. From the Services & add-ins settings in the Microsoft 365 admin center, set Let group members outside the organization access group content to On. B. From the Guest access settings in the Microsoft Teams admin center, set Allow guest access in Microsoft Teams to On. C. From the External collaboration settings in the Azure Active Directory admin center, add Contoso's domain to the list of target domains. D. From the External access settings in the Microsoft Teams admin center, add Contoso's domain to the Allowed list of domains. E. From the External collaboration settings in the Azure Active Directory admin center, set Guest users permissions are limited to No. F. From the Services & add-ins settings in the Microsoft 365 admin center, set Let group owners add people outside the organization to groups to On. TOPIC 9 - 25 -

WIDESPREAD DISAGREEMENT!!! 1. From the Guest access settings in the Microsoft Teams admin center, set Allow guest access in Microsoft Teams to On. 2. From the Services & add-ins settings in the Microsoft 365 admin center, set Let group members outside the organization access group content to On. 3. From the Services & add-ins settings in the Microsoft 365 admin center, set Let group owners add people outside the organization to groups to On. Step 1 says "In the Teams admin center, select Org-Wide settings > Guest access. Set the Allow guest access in Microsoft Teams switch to On." so that's B Step 3 says "Make sure that the Let group members outside the organization access group content check box is selected. If this setting is not selected, guests won't be able to access any group content." so that's A Step 3 also says "Make sure that the Let group owners add people outside the organization to groups check box is selected. If this setting is not selected, team owners won't be able to add new guests." so that's F - C is unnecessarily restrictive. you're not trying to block guests from other domains. D is the same. E is unnecessary. guests don't need to enumerate groups and directories in order to participate in teams and chats. OR, I think it's BCF based on https://docs.microsoft.com/en-us/microsoftteams/guest-access-checklist. A is not required since only chat is required based on the question. D is not mentioned in the link E is not required since it blocks guests "from certain directory tasks, like enumerating users, groups, or other directory resources."

Your company has a Microsoft 365 subscription and a Virtual Desktop Infrastructure (VDI) solution. The company's Microsoft Teams upgrade policy is set to Teams only coexistence mode. You deploy the Microsoft Installer (MSI) package for Microsoft Teams to the VDI solution. Several months later, users of the VDI solution report that their workstation is missing several new Microsoft Teams features. You need to ensure that the VDI solution users can use the new Microsoft Teams features. Solution: You uninstall the Microsoft Teams MSI package, and then reinstall a new Microsoft Teams MSI package. Does this meet the goal? -

Yes. VDI installs must be reinstalled using the MSI so the app goes into program files, using the CMD parameters.

You need to prevent a user named User1 from permanently deleting private chats in Microsoft Teams. Solution: You place the mailbox of User1 on Litigation Hold. Does this meet the goal? -

Yes. Private channel msgs are held in private mailboxes whereas normal chats per channel are stored in Teams group mailboxes. Placing a legal hold on the mailbox will ensure chat msgs are not deleted.


संबंधित स्टडी सेट्स

ServSafe Manager's Training - Chapter 4

View Set

Chapter 17: Preoperative Nursing Management

View Set

"I will Plant you a Lilac Tree" Characters

View Set

Στερεά γεωμετρικά σχήματα

View Set

Chapter 6 Connecticut Auto Insurance

View Set