X ray machine
Uses special equipment such as monitors or a viewing booth; cassetless
D.R
Wall bucky only works with what I.R
D.R (direct radiography)
D.R
Direct Radiography
The device that receives the energy of the x-ray beam and then forms an image of that body part
Image receptor (I.R)
Detent lock
Locks the tube into the center of the Bucky tray (where I.R Is ) transversely
when you are angling the x-ray tube, it is important to check your ——with the retractable ——-
S.I.D ; ruler
S.I.D
Source to image receptor distance
At crosswise , the IR T marker goes?
To the right of the patient
when doing a C.T.L, you should place your L&R markers where ?
To the side closest to the I.R being used
If you want use a DR cross wise on a table bucky the handle should be
Up
For a 14x17 I.R use a ——- to hold it in place
X-brace
PBL (positive beam limitation)
automatic collimation
C.R
central ray (central point)
CW
crosswise
C.T.L
Cross table lateral
Your S.I.D should be in the range of ?
42-40 inches
The 4 foot petals on the table do what (left -right )
1)Side to side 2) down 3) up 4) side to side
Tube angulation lock
Allows angulation of the tube Cephalad or Caudad
At Length wise a IR t marker goes ?
At the head
When using a laser, you should check to see if your centered with the ——- or the ——-
Bucky trey or the I.R
Uses conventional equipment with cassettes
C.R
Toward the feet
Caudad
Toward the head means?
Cephalad
A wall bucky will automatically ——- if you are at ——- or ———
Collimate; 45 or 71 S.I.D
C.R
Computed radiology
If you want to use a DR cross wise on a wall bucky, the handle should be
Down
If you want to use a DR length wise on a table bucky the handle should be
Out
If you want to use a DR length wise on a wall bucky , the handle should be
Out
To move bucky drawer you should ——- the light blue nob.
Pull
To lock the buckey drawer in place you should ——- the light blue nob.
Push in
When placing the D.R in the wall Bucky always make sure that you ——- before sliding it close
Put the grip down
LW
lengthwise
Transverse lock
locks tube into position across the width of the table
Longitudinal lock
locks tube into position along the length of the table
Vertical lock
locks tube vertically to set the SID
