300-070
103. A phone is assigned to a partition that is included in the CSS HQ-Phone. This partition contains a route pattern to block calls to service numbers 1-400-xxx-xxxx. When the engineer makes a test call to the number 1-400-400-9000 from that phone, the call goes through. What is the reason for this issue? A. The route pattern for the number to be blocked is in partition not accessible to the CSS. B. The correct route list is not selected in the route pattern for the dialed number to be blocked. C. The correct gateway is not selected for the route list for the route pattern for the dialed number to be blocked. D. The route pattern for the number to be blocked is in "NULL" partition. E. The route pattern is misconfigured.
A
30. What is the maximum number of 1080p30 HD Conference Participants if an MSE 8000 has four MSE8710 blades clustered? A. 48. B. 180 C. 720 D. 800
A
6. Refer to Exhibit: If the user at extension 1001 dials the user at extension 2002, which dial peer is used to route the call? A. 3 B. 2 C. 4 D. 1
A
61. How do you configure calling privileges on Cisco Unified Communications Manager Express? A. corlist B. translation profile C. zones D. access list E. search rules
A
74. A customer recently installed a Cisco TelePresence MCU 5320. The customer wants a virtual meeting room that restricts participants from communicating before the customer joins the call. Which feature in the MCU enables this functionality? A. Floor and chair control. B. Numeric ID. C. PIN codes. D. Owner.
A
84. Refer to the exhibit. A Cisco Unified Communications Manager group is configured with the subscriber (10.1.5.3) listed first and the publisher (10.1.5.2) listed second. Which Cisco Unified Communications Manager is used for incoming calls through an MGCP gateway? A. the publisher B. both the publisher and subscriber in a round-robin format C. the first server listed in the Cisco Unified Communications Manager group list D. the subscriber
A
99. Which discard digits instruction removes the access code from a number before passing the number onto an adjacent system? A. PreDot B. PreAt C. NoDigits D. Trailing-#
A
44. Which option describes how you add software conference bridges to Cisco Unified Communications Manager? A. By adding a Cisco Unified CM server to the cluster. B. By adding a software conference bridge using Conference Bridge Configuration. C. By installing DSP to a Cisco Unified CM server. D. By reassigning other media resources to conference resources.
A 45. Which two algorithms are valid to distribute calls in a route group? (Choose two.) A. broadcast B. circular C. top-down D. bottom-up E. round-robin Answer: B,C Explanatiion: Reference: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/bccm-712cm/b03rtgrp.pdf (page 2)
77. What function does the device pool perform? A. It separates user and physical location information. B. It sets the default device parameters for all IP phones in the cluster. C. It sets the location bandwidth used between different locations. D. It provides a single point of configuration for every device in a Cisco Unified Communications Manager cluster.
A Explanatiion: Reference: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/bccm-712cm/b02devpl.html
27. Which two statements about Cisco VCS Addressing Zones are true? (Choose two.) A. They can be local to the Cisco VCS or can be remote. B. A zone is a collection of endpoints that share the same dialing behavior and bandwidth settings. C. They consist of traversal and nontraversal zones. D. They can only be local. E. They consist of subzones such as DNS zones.
A,B
90. You are a Voice Engineer working at ABC Company. You are asked to configure Cisco Unified Border Element in Cisco Unified Communications Manager. Which two configurations are required? (Choose two.) A. Configure a SIP profile with Early Offer support for voice and video calls; insert MTP as needed. B. Change the SIP trunk security profile to a nonsecure SIP trunk profile. C. Under the SIP information configuration, set the destination port to 5061. D. Bind the SIP signaling to the Cisco Unified Border Element interface. E. Configure dial peers on Cisco Unified Border Element for inbound and outbound calls appropriately.
A,B
33. Which two elements of a dial plan define the domains that are accessible and are assigned to an endpoint? (Choose two) A. Partitions. B. Calling Search Spaces. C. Route patterns. D. Translation patterns. E. Call Admission Control.
A,B 34. Callers inform you that they hear a second dial tone after dialing the number 4085550123. Which dial-peer configuration command resolves this issue? A. answer-address 408555.... B. destination-pattern 91[2-9]..[2-9]..... C. forward-digits all D. direct-inward-dial Answer: D
109. Which three options are valid SIP URI formats? (Choose three.) A. [email protected] B. tel:[email protected] C. phone:[email protected] D. sip:[email protected]:5060;user=phone E. sip:bob.cisco.com
A,B,D
36. Which four modes are available on the Cisco TelePresence MCU MSE 8510 to connect to a gatekeeper? (Choose four.) A. direct mode B. H.225-routed mode C. H.265-routed mode D. H.245-routed mode E. full proxy mode F. partial proxy mode
A,B,D,E
20. Which two features are advantages of deploying a cluster over WAN? (Choose two.) A. Shared line appearances B. CentralizedDSP resources C. Extension mobility within the cluster D. Scalability up to 20 sites, if thereis sufficient IP WAN bandwidth E. Failover to co-resident Cisco UnifiedCall Manager Express platforms
A,C
31. Managers have asked to be able to have an extension call them back if it is busy when they try to call it. In what two places can this feature be assigned to the Managers phone? (Choose two.) A. Device Settings > Softkey Template B. Device Settings > Default Device Profile Configuration C. Device Settings > Phone Button Template D. Device Settings > Device Profile E. Device Settings > Device Defaults F. Device Settings > Firmware Load Information
A,C
93. A customer is integrating two video solutions between regions using a Cisco Unified Border Element and finds that some of the RTP payloads are not compatible with the Cisco Unified Border Element configuration. Which two actions does Cisco recommend to solve this issue? (Choose two.) A. Specify the video payload on the voice service. B. Configure a transparent codec on the dial peers. C. Configure RTP payload mapping on the dial peers. D. Configure asymmetric payload on the voice service. E. Set up a voice class for the video codec.
A,C
86. Which three Cisco Unified CallManager configuration steps are required to support third party SIP phones? (Choose three.) A. Configure the device in Cisco Unified CallManager. B. Change the proxy address in the SIP phone to an IP address or the Fully Qualified Domain Name (FQDN)of Cisco Unified CallManager. C. Associate the device with the end user. D. Configure the phone with the TLS username and password. E. Configure the end user in Cisco Unified CallManager. F. Add the MAC address of the Cisco Unified CallManager server to the SIP phone configuration page.
A,C,E
104. Which three options are types of media resources in CUCM? (Choose three) A. Music on hold B. H.323 trunk C. Media Termination Point D. Meet-Me Conference E. SIP trunk F. Transcoder
A,C,F
79. Refer to the exhibit and configuration output. What are the two main ways from New York to call Extension 6001 in England? (Choose two.) sh run | s Dial-peer dial-peer voice 2 voip destination-pattern 6... preference 0 session-target ipv4: 200.10.10.5 dtmf-relay sip-notify dial-peer voice 3 pots destination-pattern 6... preference 1 port 0/0/0:23 prefix 757385 dtmf-relay sip-notify A. The first way is WAN. B. The first way is PSTN. C. The second way is WAN. D. The second way is PSTN.
A,D
85. In a multisite deployment, which two voice codecs are recommended to use between intrasite endpoints? (Choose two) A. G.711 B. G.728 C. H.264 D. G.722 E. G.729
A,D
9. Refer to the exhibit. A Network Administrator needs to create a SIP route pattern to communicate with Monterrey's Gateway. The Administrator does not understand why this is not working properly. Which two statements explain the issue and resolve the problem? (Choose two.) A. The Administrator needs to set up a SIP trunk between Monterrey's Gateway and Cisco Unified Communications Manager. B. The Administrator should type the reload command into Monterrey's Gateway C. The issue is caused by a failure of communication between the Monterrey's Gateway and Cisco Unified Communications Manager D. The issue is caused by incorrect protocol integration between Monterrey's Gateway and Cisco Unified Communications Manager.
A,D
2. Which three options can be used to configure digit manipulation for dial peers? (Choose three.) A. digit translation rules B. called party transformations C. route partitions D. forward digits E. route patterns F. digit stripping and prefixes G. calling party transformations
A,D,F Explanatiion: Reference: http://www.cisco.com/c/en/us/td/docs/ios/12_2/voice/configuration/guide/fvvfax_c/vvfpeers.html#wp1244453 - 3. Which three options are valid digit discard instructions? A. PreAt. B. PreDot. C. Leading#. D. PostAt. E. Trailing#. F. PostDot. Answer: A,B,E
21. Which two of the following DSPs can be used in heterogeneous conferencing to achieve the required trans-sizing and transcoding functionality? (Choose two.) A. PVDM3-256 B. PVDM2-256 C. PVDM-192 D. PVDM3-32 E. PVDM3-192 F. PVDM2-128
A,E
38. Which two options are IOS conference bridge types in CUCM? (Choose two) A. CiscoIOS Enhanced Conference Bridge B. CiscoIOS Standard Conference Bridge C. CiscoIOS Software Conference Bridge D. CiscoIOS Hardware Conference Bridge E. Cisco IOS Conference Bridge
A,E
54. What are two characteristics of a Cisco Unified Communications Manager dial plan? (Choose two.) A. partitions and calling search spaces B. COR C. dial peers D. voice translation rules E. route patterns
A,E
73. Which two Cisco products allow the use of a dial plan with E.164, H.323, SIP, and DNS? (Choose two.) A. Cisco Expressway B. Cisco Unified Communications Manager C. Cisco Unified Border Element D. Cisco IM and Presence E. Cisco TelePresence Video Communication Server
A,E
50. When creating a route pattern, which two of these options should you avoid? (Choose two) A. Lowercase characters, such as a, b, c B. Wildcards. C. Numbers. D. Uppercase characters, such as A, B, C. E. Spaces. F. Special characters andescape sequences, such as @ and \+.
A,E 51. Which type of IOS Conference bridge requires all users to use the same video format in order to participate in a video conference? A. Ad Hoc Conferencing B. Homogenous Conferencing C. HeterogeneousConferencing D. Guaranteed Audio Video Conferencing E. Meet-Me Conferencing Answer: B
39. Which three descriptions are true? (Choose three.) A. The class of service is a parameter that is used for traffic classification and marking at Layer 2. B. The IP precedence is a parameter that is used for traffic classification and marking at Layer 2. C. The differentiated services code point is a parameter that is used for traffic classification and marking at Layer 2. D. The class of service is a parameter that is used for traffic classification and marking at Layer 3. E. The IP precedence is a parameter that is used for traffic classification and marking at Layer 3. F. The differentiated services code point is a parameter that is used for traffic classification and marking at Layer 3.
A,E,F 40. Which two of these are required in order for Cisco Unified Communications Manager to support software conferencing? (Choose two.) A. The Cisco IP Voice Media Streaming Application needs to be activated on the server running the conferencing service in the cluster. B. The service parameter for the Cisco IP Voice Media Streaming Application needs to have Run Flag set to True. C. The software conference bridge resource needs to be configured in Cisco Unified Communications Manager. D. The Cisco IP Voice Media Streaming Application needs to be activated for all servers in the cluster. E. Under the Cisco IP Voice Media Streaming Application parameters, the conference bridge needs to have Run Flag set to True. Answer: A,E
105. A customer recently installed a Cisco TelePresence MCU 5320. The customer wants a virtual meeting room that restricts participants from communicating before the customer joins the call. Which feature in the MCU enables this functionality? A. numeric ID B. floor and chair control C. owner D. PIN codes
B
106. When comparing SIP H.323 and MGCP, which of the following is specific to SIP? A. The dial plan is directly on the gateway. B. SIP provides support for third-party entities. C. SIP defines Translation per the gateway. D. SIP has a centralized dial plan.
B
26. When local route groups are used and a user dials 918005551212, what component is ultimately used to route the digits to the local gateway? A. The route list applied to the route pattern B. The device pool of the calling device C. The translation pattern D. The gateway or route list associated with the +.! route pattern
B
29. Which discard digits instruction removes all digits prior to the North American Numbering Plan portion of the route pattern? A. PreDot B. PreAt C. Pre D. PreNANP
B
58. If the route patterns 5XXX, 51XX, 513X, and 5134 exist within a call route database, which pattern would be matched if the dialed number was 5124? A. 5XXX B. 51XX C. 513X D. 5134
B
60. The Ajax Corporation is designing an IP telephony network using Cisco MCS 7845 Series servers, each one capable of supporting 7500 devices. The design must meet these requirements: -Be cost-effective -Support up to 7500 phones -Provide a minimal level of redundancy A. Two Cisco Unified Communications Manager servers:1 publisher and TFTP server combined.1 primar subscriber. B. Three Cisco Unified Communications Manager servers:1 publisher and TFTP server combined.1 primary subscriber.1 backup subscriber. C. Four Cisco Unified Communications Manager servers:1 publisher.1 TFTP server.1 primary subscriber.1 backup subscriber. D. Five Cisco Unified Communications Manager servers:1 publisher.1 TFTP server.1 primary subscriber.2 backup subscribers.
B
63. What are the characteristics of a Cisco Unified Communications Manager group? A. Each call-processing server can be assigned to a single Cisco Unified Communications Manager group. B. A Cisco Unified Communications Manager group is a prioritized list of (one or more) callprocessing and application servers. C. Each device has to have a Cisco Unified Communications Manager group assigned, which will determine the primary and backup servers to which it can register. D. A single Cisco Unified Communications Manager group can exist in a single cluster.
B
67. On Cisco Unified Communications Manager, where can you change the softkey templates from your IP phone? A. Cisco Unified Communications Manager Serviceability > Device > Device Settings > Softkey Templates. B. Cisco Unified Communications Manager Administration > Device > Device Settings > Softkey Templates. C. Cisco Unified Communications Manager Administration > Device > Device Settings > Phone ButtonTemplate. D. Cisco Unified Communications Manager Administration > Device > Device Settings > Device Defaults.
B
72. Which statement about translation patterns and transformation patterns is true? A. Both transformation patterns and translations patterns support only numeric values. B. Both transformation patterns and translations patterns support numeric and alphanumeric values. C. Transformation patterns support numeric and alphanumeric values, whereas translations patterns supportonly numeric values. D. Translation patterns support numeric and alphanumeric values, whereas transformation patterns supportonly numeric values.
B
81. Refer to Exhibit: If the user at extension 1001 dials the user at extension 2011, which dial peer is used to route the call? A. 3 B. 2 C. 4 D. 1
B
89. You are a Network Engineer at ABC Company. You want to ensure that when the contact center agent for the company makes an external call, the extension 897 654 300 is displayed. How do you resolve this issue? A. Configure a Line Text Label on the Directory Number configuration page. B. Configure an external phone number mask on the Directory Number configuration page. C. Configure a translation pattern with the pattern 897654300. D. Configure an external phone number mask on the Device configuration page.
B
96. What is the best tool to test end verify a dial plan during the implementing phase? A. Translator X B. CUCM Dialed Number Analyzer. C. Real-Time Monitoring Tool. D. Cisco Prime Collaboration Tool.
B
16. Refer to the exhibit. Which option is the most highly recommended option to install Cisco TelePresence Conductor on the virtual machine? A. Thick Provision Eager Zeroed B. Thick Provision Lazy Zeroed C. Thick Provision D. Thin Provision
B Explanatiion: Reference: http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/install_gui de/Tele Presence-Conductor-Virtual-Machine-Install-Guide-XC3-0.pdf (page 8)
64. Hackers are sending calls through a gateway router that is running SIP. The engineer blocks all SIP messages to the router except from their SIP server, which has an IP address of 208.177.10.1. The customer also must connect via SIP to their Cisco Expressway server with an IP address of 10.1.10.110. Which series of commands secures the router from the hackers? A. voice service voip voip security allow ipv4 208.177.10.1 255.255.255.255 ipv4 10.1.10.110 255.255.255.255 B. voice service voip ip address trusted list ipv4 208.177.10.1 255.255.255.255 ipv4 10.1.10.110 255.255.255.255 C. voice service voip allow-connections sip to sip ipv4 208.177.10.1 255.255.255.255 ipv4 10.1.10.110 255.255.255.255 D. voice service voip address-hiding ipv4 208.177.10.1 255.255.255.255 ipv4 10.1.10.110 255.255.255.255
B Explanatiion: Reference: http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/112083tollfraud-ios.html
1. Which tool can you use to evaluate dial plans for errors and to examine internal-to-internal and internal-to-external calls? A. RTMT B. DNA C. QRT Viewer D. CAR tool
B Explanatiion: Reference: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/dna/9_1_1/CUCM_BK_C514A4AE_00_cucm-dialed-number-analyzer-91/CUCM_BK_C514A4AE_00_cucm-dialed-number-analyzer-91_chapter_01.html
57. What are two characteristics of a Cisco Unified Communications Manager Express dial plan? (Choose two.) A. partitions and calling search spaces B. COR C. dial peers D. voice translation rules E. route patterns
B,C
65. Which two describe how media resources and audio streams operate with Cisco Unified Communications Manager? (Choose two.) A. Audio streams are terminated differently depending on the signaling protocol, such as SCCP or SIP. B. Audio streams are always terminated by media resources. C. All media resources register with Cisco Unified Communications Manager. D. There are no situations in which IP phone-to-IP phone audio streams will go directly between endpoints. E. Signaling between Cisco Unified Communications Manager and hardware media resources uses the same protocol as the call-signaling type.
B,C
53. Which three items have a calling search space? (Choose three.) A. transcoder B. gateways C. phone lines D. phones E. partitions F. AAR groups
B,C,D Explanatiion: Reference: http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unifiedcommunications-manager-callmanager/22325-part-css-tn.html
98. Which three commands show the output of an active video call? (Choose three.) A. show vrm active_calls B. show call active video brief C. show voip rtp connections D. show voice call E. show voice call summary F. show video dsp
B,C,E
18. Which three options are components of Media Resources Architecture? (Choose three) A. Music on hold. B. Media Resource Manager. C. Media Resource Group. D. Route list. E. Route group F. Media Resource Group List.
B,C,F
100. Which three options can belong to specific partitions? (Choose three.) A. voice-mail servers B. directory numbers C. translation patterns D. gateways E. IP phones F. route patterns
B,C,F Explanatiion: Reference: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/bccm-712cm/b02devpl.html (configuring a device pool)
91. Which three steps are needed to enable time-of-day call routing? (Choose three.) A. Configure an access list. B. Configure a time period. C. Configure a time schedule. D. Configure a route pattern. E. Configure a partition. F. Configure dial rules. G. Configure a calling search space.
B,C,G Explanatiion: Reference: http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unifiedcommunications-manager-callmanager/109588-tod-routing-example00.html
102. Which two options can a route pattern be assigned? (Choose two.) A. a gateway that is not assigned to a route group B. gateway that is assigned to a route group C. a route list with no route groups configured D. a route list with one or more route groups configured
B,D
107. What are the two benefits of using SIP dial rules on an IP phone? (Choose two) A. The phone can initiate dialing without sending any signaling messages to Cisco Unified CommunicationsManager. B. The phone can detect invalid numbers and play a reorder tone without sending any signaling messages to Cisco Unified Communications Manager. C. If dialed digits match an entry of a SIP dial rule, the dialed string is sent in a single SIP 200 OK message to Cisco Unified Communications Manager. D. If Cisco Unified Communications Manager requires more digits, KPML can be used to send the remainingdigits from the SIP phone to Cisco Unified Communications Manager one-by-one. E. If Cisco Unified Communications Manager requires more digits, another en bloc message is used to send the remaining digits from the SIP.
B,D
7. Refer to the exhibit. ABC Company uses the digit 9 to get a dial tone and type a DN. A user needs to type 8811202 and automatically send the call to a cellphone. The Network Administrator did this configuration, but it is not working. Which two actions can the Administrator take to solve this problem? (Choose two) A. In the Translation Pattern option, delete the digit "8". B. In the Translation Pattern option, delete the digit "9". C. In the Route Option option, select Block this Pattern. D. In the Called Party Transform Mask option, prefix the digit "9".
B,D
80. What are two characteristics of a partition? (Choose two.) A. Assigned to sources of call routing requests B. Any group of numbers with the same reachability C. Used in conjunction with calling search spaces to track calls to certain numbers D. Used in conjunction with calling search spaces to restrict outgoing calls to certain numbers E. Contains calling search spaces
B,D
101. Which three statements about the default VoIP dial peer are true? (Choose three.) A. VAD is disabled. B. RSVP is not supported. C. Only the G.711 codec is supported. D. The G.729 and G.711 codecs are supported. E. Fax-rate service is supported. F. DTMF relay is supported.
B,D,E
12. Which three CLI commands allow you to verify the correct VoIP dial-peer matching? (Choose three.) A. debug ccsip messages B. debug voip ccapi inout C. debug dialpeer match D. debug voip dialpeer inout E. show dialplan number
B,D,E
78. Which three are functions of Cisco Unified Border Element? (Choose three.) A. client registration B. H.323 and SIP interworking C. Lync interworking D. transcoding E. phone proxy F. mobile and remote access
B,D,E
15. Refer to Exhibit: An engineer is working on a ticket that reports TEL1 cannot call TEL2. These dial peers are configured to route the call between the endpoints. dial-peer voice 2001 voip destination-pattern 2001 session protocol sipv2 session target ipv4:10.1.1.2 incoming called-number . codec g722-64 video codec h264 dtmf-relay rtp-nte sip-notify sip-kpml no vad dial-peer voice 3001 voip destination-pattern 3001 session protocol sipv2 session target ipv4:10.3.1.2 incoming called-number . codec g722-64 video codec h264 dtmf-relay rtp-nte sip-notify sip-kpml no vad While troubleshooting, the engineer discovers that the Cisco Unified Border Element is giving the error "SIP/2.0 403 Forbidden". Which two Cisco Unified Border Element configurations resolve this issue? (Choose two.) A. voice service voip mode border-element ip address trusted list ipv4 10.1.1.0 255.255.255.0 ipv4 10.2.1.0 255.255.255.0 allow-connections sip to sip sip bind control source-interface loopback0 bind media source-interface loopback0 B. voice service voip no ip address trusted authenticate mode border-element allow-connections sip to sip sip bind control source-interface loopback0 bind media source-interface loopback0 C. voice service voip mode border-element ip address trusted list allow-connections sip to sip sip bind control source-interface loopback0 bind media source-interface loopback0 D. voice service voip mode border-element allow-connections sip to sip sip bind control source-interface loopback0 bind media source-interface loopback0 E. voice service voip mode border-element ip address trusted list ipv4 10.1.1.0 255.255 255.0 ipv4 10.3.1.0 255.255.255.0 allow-connections sip to sip sip bind control source-interface loopback0 bind media source-interface loopback0
B,E
95. Which two components must an engineer configure before configuring SIP route pattern? (Choose two.) A. route filter B. SIP trunk C. route partition D. calling search space E. SIP profile
B,E Explanatiion: Reference: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/bccm-861cm/b03siprp.html
8. Which three elements are used to configure calling privileges? (Choose three) A. Route pattern. B. Calling search space. C. Replica. D. User. E. Partition F. Time schedule.
B,E,F
108. You need to delete an auto-registration Cisco Unified Communications Manager group for a cluster. What should you do? A. Remove the Cisco Unified CallManager group devices. B. Disable auto-registration settings in the Cisco Unified CallManager group. C. Assign a different call group as the auto-registration Cisco Unified CallManager group. D. Delete the auto-registration Cisco Unified CallManager group without performing any action.
C
11. Refer to the exhibit. Which party has a SIP B2BUA role in the call? A. 172.17.4.100 B. 10.100.4.65 and 172.17.4.100 C. 10.100.4.65 D. None of the parties has a B2BUA role in the call. E. 10.100.4.68 and 10.100.4.65
C
13. Which codec provides native WebRTC-based video chat support in browsers such as Mozilla Firefox? A. H.265 B. WMV C. H.264 D. G.711 E. H.323
C
14. A voice engineer is troubleshooting an issue that involves incoming calls to POTS lines. Which command verifies the digits that are received by voice-port? A. debug voip dial-per B. debug vtsp session C. debug vtsp dsp D. debug call treatment E. debug voice protocol
C
19. When dialing 1234, which rule is matched first? A. route pattern 1XXX B. route pattern 12[123]X C. translation pattern 12[123]X D. translation pattern 1XXX E. directory number 12345
C
24. An engineer configures a router with an ISDN PRI connection that only contains two dial peers as follows: dial-peer voice 10 pots destination-pattern 9T port 0/0/0:23 dial-peer voice 100 voip destination-pattern 45.. session target ipv4:10.2.10.1 When an inbound call is placed from the PSTN to extension 4510, a dial tone is heard. Which additional dial peer is needed to allow the call to terminate directly to the internal number? A. dial-peer voice 1 pots answer-address . direct-inward-dial B. dial-peer voice 1 pots destination-pattern 45.. direct-inward-dial C. dial-peer voice 1 pots incoming called-number . direct-inward-dial D. dial-peer voice 1 pots destination-pattern 45.. port 0/0/0:23 direct-inward-dial
C
25. When the Cisco IOS router or gateway receives a call setup request, what is the PID value of the default dial peer? A. ID:3 B. PID:6 C. PID:0 D. PID:4 E. PID:5 F. PID:1 G. PID:2 H. PID:7
C
66. What is the correct order for configuring call routing in Cisco Unified Communications Manager? A. gateway and SIP trunk, route group, route pattern, route list B. gateway and SIP trunk, route list, route group, route pattern C. gateway and SIP trunk, route group, route list, route pattern D. route list, gateway and SIP trunk, route group, route pattern
C
68. Which QoS model is bandwidth-dedicated to provide sufficient quality for applications that need high resolution, such as video terminals? A. Best-Effort B. IntServ C. DiffServ D. DiffServf
C
69. What is the difference between policing and shaping? A. Policing: Transmit and mark, then transmit the packets. Shaping: Buffer the exceeding packets. B. Policing: Transmit the packets. Shaping: Buffer the exceeding packets. C. Policing: Transmit, drop or mark, then transmit the packets. Shaping: Buffer the exceeding packets. D. Policing: Buffer the exceeding packets. Shaping: Transmit and mark, then transmit the packets.
C
71. How are Cisco Unified CallManager location parameters used? A. Assign directory numbers to devices as they connect to the IP telephony network. B. Specify the bandwidth used for audio and video calls. C. Implement call admission control in a centralized call processing deployment. D. Provide alternate call routing when the primary call path is unavailable.
C
75. Which route pattern wildcard character is used to terminate the interdigit timeout? A. $ B. ! C. # D. .
C
83. Refer to Exhibit: If the user at extension 1001 dials the user at extension 2001, which dial peer is used to route the call? A. 3 B. 2 C. 4 D. 1
C
87. What is the correct configuration order of call routing to support off-net call routing? A. device, route group, route list, route pattern B. route list, route group, route pattern, device C. route pattern, route list, route group, device D. device, route list, route group, route pattern
C
94. What is the correct path selection for a call that is routed through a Cisco Unified Communications Manager system? A. Devices -> Route Group -> Route List -> Route Pattern B. Route List -> Route Pattern -> Route Group -> Devices C. Route Pattern -> Route List -> Route Group -> Devices D. Route Group -> Devices -> Route Pattern -> Route List
C
35. Which Cisco Unified Communications Manager default global conference setting should be changed to ensure fraud prevention? A. Advanced Ad Hoc Conference Enabled B. Enable Click-to-Conference for Third-Party Applications C. Drop Ad Hoc Conference D. Block OffNet to OnNet Transfer E. MCU Conference Bridge Custom Layout Index
C Explanation: Cisco Unified Communications Manager Administration provides the clusterwide service parameter, Drop Ad Hoc Conference, to allow the prevention of toll fraud (where an internal conference controller disconnects from the conference while outside callers remain connected). The service parameter settings specify conditions under which an ad hoc conference gets dropped. Reference: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/accm- 861cm/a05confb.html
59. If you have configured translation rules, what command do you use to verify digit manipulation? A. execute translation-rule B. show translation-rule C. test translation-rule D. debug translation-rule E. set translation-rule
C Explanation: If you have configured translation rules, use the test translation-rule command to verify digitmanipulation. Page 136.
10. What are two characteristics that are associated with the End User and User account types? (Choose two.) A. They cannot use LDAP. B. They are used to authorize applications. C. They can utilize LDAP. D. The Application is associated with the End User and User account types. E. They can be listed in a directory.
C,D
17. Refer to the exhibit. A Network Administrator needs to create a SIP route pattern to communicate with Monterrey's Gateway. The Administrator does not understand why this is not working properly. Which two statements explain the issue and resolve the problem? (Choose two.) A. The issue is caused by a failure of communication between the Monterrey's Gateway and CUCM. B. The Administrator should type the reload command into Monterrey's Gateway. C. The issue is caused by incorrect protocol integration between Monterrey's Gateway and CUCM. D. The Administrator needs to set up a SIP trunk between Monterrey's Gateway and CUCM.
C,D
46. Which two codecs are the best codecs to use in WAN and LAN? (Choose two.) A. WAN codec G.711 B. LAN codec G.729 C. WAN codec G.729 D. LAN codec G.711
C,D
42. Which two statements describe the function of the off-net option in a route pattern? (Choose two.) A. The off-net option indicates that if a call is not routed through this route pattern, it is considered off the local network, or "off-net". B. This option could be used to block an external call from transferring to an internal party. C. This option could be used to block an external call from transferring to an external party. D. The off-net option indicates that if a call is routed through this route pattern, it is considered off the local network, or "off-net."
C,D 43. When implementing a global dial plan, which digit manipulation feature in CUCM does Cisco recommend for adding +1 to all outbound calls? A. Called party transformation. B. Calling party transformation. C. Translation pattern. D. External phone mask. Answer: A
88. Which two codecs are supported by the Cisco Unified Communications Manager software conferencing media resource? (Choose two.) A. G.723 B. G.729 C. wideband D. GSM E. G.711
C,E
22. Refer to the exhibit. To reach an external number, a user first dials a 9. Which route pattern will be matched if a user dials the toll-free number 18005550123? A. 911 B. 9.[2-9]XXXXXX C. 9.1[2-9]XX[2-9]XXXXXX D. 9.18[0,6-8][0,6-8]XXXXXXX E. 9.1900XXXXXXX F. 9011!
D
23. Refer to the exhibit. To reach an external number, a user first dials a 9. Which route pattern will be matched if a user dials the toll-free number 18005550123? A. 911 B. 9.[2-9]XXXXXX C. 9.1[2-9]XX[2-9]XXXXXX D. 9.1800XXXXXXX E. 9.1866XXXXXXX F. 9.1877XXXXXXX G. 9.1888XXXXXXX H. 9.1900XXXXXXX I. 9011!
D
32. You are a Voice Engineer at ABC Company. You want to provision a new voice gateway for a remote site, and you need to configure 24 channels of a T1 CAS interface. Which set is the correct set of commands for this configuration? A. R1(config)# controller t1 1/0R1(config-controller)# framing esfR1(config-controller)# linecode b8zsR1(config-controller)# primary-group 1 timeslot 1-24 type fxo-loop-start B. R1(config)# controller t1 1/0R1(config-controller)# linecode hdb3R1(config-controller)# framing crc4R1(config-controller)# clock source lineR1(config-controller)# ds0-group 1 timeslot 1-24 type fxo-loop-start C. R1(config)# isdn switch-type primary-5essR1(config)# controller t1 t1/0R1(config- controller)# pri-group timeslots 1-24 D. R1(config)# controller t1 1/0R1(config-controller)# framing esfR1(config-controller)# linecode b8zsR1(config-controller)# clock source lineR1(config-controller)# ds0-group 1 timeslot 1-24 type fxo-loop-start
D
41. By default, what value is voice traffic marked as on a Cisco Catalyst Switch? A. DSCP CAS6 value 21, Cos 3 B. DSCP AF21 value 46, Cos 5 C. DSCP EF value 46, Cos 7 D. DSCP EF value 46, Cos 5
D
55. Refer to Exhibit: If the user at extension 1001 dials the user at extension 2111, which dial peer is used to route the call? A. 3 B. 2 C. 4 D. 1
D
62. Which dial plan function is used to restrict calls that are made by a lobby phone to internal extensions only? A. Path selection. B. Endpoint addressing. C. Manipulation of dialed destination. D. Calling privileges.
D
92. Which DiffServ PHB classification is recommended by Cisco for interactive video traffic? A. AF31 B. CS3 C. EF D. AF41 E. CS4
D
Explanation: A homogenous conference refers to one in which participants connect to the ISR G2 with devices that support the same video format attributes (for example, the same codec, resolution, frame rate, and bit rate). 52. ABC SA de CV is a Company located in New York City and has 3 Branch Offices in Laredo, Bryan, and Houston Texas. The network Administrator has the requirement to configure that all international calls goes out first for Houston Texas, if the GW of Houston goes down then the international call goes out for Bryan Texas and if GW of Bryan goes down, the international call will go out of Laredo Texas. What does the Administrator have to configure to achieve this requirement? A. Configure a Route Pattern selecting all possible gateways. B. Configure a Line Group for international calls selecting the first option GW of Houston, then Bryan and finally Laredo. After this he has to configure a Hunt List for international calls selecting the Line Group for international calls and finally create the Hunt Pilot for International calls selecting the Hunt List created for international calls. C. Configure a New Partition and New CSS for international calls. D. Configure a Route Group for international calls selecting the first option GW of Houston, then Bryan and finally Laredo. After this he has to configure a Route List for international calls selecting the Route Group for international calls and finally create the Route Pattern for International calls selecting the Route List created for international calls.
D
5. Where do you configure the region for a group of devices? A. Common device profile. B. Device defaults. C. Common device configuration. D. Common phone profile. E. Device pool.
E
56. Refer to the exhibit. 9.1[2-9]XX[2-9]XXXXXX 9.18[0,6-8][0,6-8]XXXXXXX 9.1900XXXXXXX 9011.! 9011.!# To reach an external number, a user first dials a 9. Which route pattern will be matched if a user dials an international number 011442288223001 and terminates the interdigit timeout? A. 9.1[2-9]XX[2-9]XXXXXX. B. 9.18[0,6-8][0,6-8]XXXXXXX. C. 9.1900XXXXXXX. D. 9011.!. E. 9011.!#.
E
70. Which route pattern is the best match for the range of 6000 to 6599? A. 65XX B. 60XX C. 6[05]XX D. 6XXX E. 6[0-5]
E
76. Which protocol is recommended to be used between Cisco Unified Communications Manager and the voice gateway to simplify the dial plan? A. SIP. B. SCCP. C. H323. D. RSVP. E. MGCP.
E
97. What is a route list? A. a list of locations B. an ordered list of regions C. a list of route patterns D. an ordered list of gateways and trunks E. an ordered list of route groups
E
47. The CSS on a line includes the partitions 911, internal and local. The CSS on the device includes the partitions 911, internal, local and long distance. Which CSS will be used if the phone user dials a local number? A. The device CSS will be used since the device CSS is always used first on an IP phone. B. Since the dialed digits are a match to a partition is in both Calling Search Spaces the call will use both matched partitions in both Calling Search Spaces in a round-robin format. C. If there is both a line and device CSS the line device will only be used. D. The line and device CSSs will be combined and the device CSS will take precedence. E. The line and device CSSs will be combined and the line CSS will take precedence.
E 48. In a centralized call-processing solution, there are five sites connected through an IP WAN. To optimize the utilization of the IP WAN, CAC needs to be implemented. How should CAC be implemented? A. Use a gatekeeper to control allocated bandwidth properly. B. Use locations CAC with a single location. C. Use a gatekeeper and Cisco Unified Border Element to provide CAC to sites that use a combination of SIPand MGCP gateways. D. Use a gatekeeper to only control those locations that use H.323 gateways and a Cisco Unified BorderElement to control those sites that use MGCP or SIP gateways. E. Use locations CAC with five locations in addition to Hub none. Answer: E 49. When dialing off-hook from an SCCP phone, how does Cisco Unified Communications Manager analyze the incoming dialed digits? A. SIP dial rules B. en bloc dialing C. digit-by-digit analysis D. KPML Answer: C
4. To verify that proper digit manipulation is being applied when using called party transformation patterns, which Cisco IOS command do you use from the router or voice gateway? A. show voice ccapi inout B. debug voice ccapi in C. show voice ccapi D. show voice ccapi in E. debug voice ccapi inout F. debug voice ccapi out G. show voice ccapi out
E Explanatiion: Reference: http://www.netcraftsmen.com/called-party-transformation-patterns-example-andvalidation/