3.7

Which of the following are the MOST likely signs that your computer might need more memory?

-Your hard drive light on the system case is on for long periods of time. -Your hard drive is constantly operating as you work.

You are attempting to boot a new system. The boot fails, and the system sounds a beep code. what describes the MOST likely cause of this error?

Either no memory is installed or the memory was not detected.

Which type of software-generated problems can indicate that a software bug is causing a memory error?

Exception error General-protection fault Page fault

You have installed a new computer with a quad-core 64-bit processor, 6 GB of memory, and a PCIe video card with 512 MB of memory. After installing the operating system, you see less than 4 GB of memory showing as available in Windows. What action would MOST likely correct this issue?

Install a 64-bit version of the operating system.

After installing two memory modules, you power on the system to check for errors. You find that the BIOS program recognizes only one of the memory modules. Which of the following is BEST to try first when troubleshooting this issue?

Make sure that both modules are seated properly in their slots.

First boot of a new computer

Memory is not properly seated, is missing, or the motherboard is defective.

As a computer technician, you are troubleshooting a client's computer that is experiencing intermittent crashes and sudden reboots. The client reports that these issues started happening after a recent memory upgrade. You have already confirmed that the new memory modules are compatible with the system and are properly installed. What would be the next BEST step to diagnose the issue?

Run a memory diagnostic tool to check for any memory errors.

Memory Upgrade

The memory is incompatible and was not installed and configured properly.

Software installation

This event can require more memory and can cause problems if there is not enough memory when it occurs.

After installing a new RAM module, you boot your 64-bit system, but the display remains blank. What is the MOST likely cause of this issue?

You have installed a non-parity RAM on an ECC system.

Which of the following are critical times when memory problems manifest themselves

-After you remove or install hardware -On the first boot of a new computer

Hardware installation or removal

Incompletely or improperly doing this can cause errors that appear to be memory-related.

You are in the process of configuring a new computer. The motherboard has four memory slots and supports dual-channel memory. You install two memory modules. When you boot the computer, the BIOS recognizes both modules, but the memory is not configured to run in dual-channel mode. What should you do to resolve the issue?

Move the modules to the correct motherboard slots.