5.12 Quiz

Which 802.1Q priority is IP phone traffic on a voice VLAN tagged with by default?

5 By default, IP phone traffic on a voice VLAN is tagged with an 802.1Q priority of 5.

You are adding switches to your network to support additional VLANs. Unfortunately, the new switches are from a different vendor than the current switches. Which standard do you need to ensure that the switches are supported?

802.1Q If you want to implement VLANs when using multiple vendors in a switched network, be sure each switch supports the 802.1Q standard.

Which of the following is an appropriate definition of a VLAN?

A logical grouping of devices based on service need, protocol, or other criteria. A virtual LAN (VLAN) can be defined as the following: - A logical collection of devices that belong together and act as if they are connected to the same wire or physical switch. - A logical grouping of devices based on service need, protocol, or other criteria rather than physical proximity.

The IT manager has asked you to create four new VLANs for a new department. As you are going through the VLAN configurations, you find some VLANs numbered 1002-1005. However, they are not in use. What should you do with these VLANs?

Nothing. They are reserved and cannot be used or deleted. You should do nothing and leave these VLANs alone. VLANs 1002 through 1005 are reserved for backward compatibility with old VLAN implementations, which are no longer being used. You cannot use or delete these VLANs.

A virtual LAN can be created using which of the following?

Switch Use a switch to create virtual LANs (VLANs). The various ports on a switch can be assigned to a specific VLAN to create logically distinct networks on the same physical network topology.

When configuring VLANs on a switch, what is used to identify which VLAN a device belongs to?

Switch port VLAN membership is configured by assigning a switch port to a VLAN. A switch can have multiple VLANs configured on it, but each switch port can only be a member of a single VLAN. All devices connected to a switch port are members of the same VLAN.

You run a small network for your business that has a single router connected to the internet and a single switch. You keep sensitive documents on a computer that you would like to keep isolated from other computers on the network. Other hosts on the network should not be able to communicate with this computer through the switch, but you still need to access the network through the computer. What should you use for this situation?

VLAN Define virtual LANs (VLANs) on the switch. With a VLAN, a port on the switch is associated with a VLAN. Only devices connected to ports that are members of the same VLAN can communicate with each other. Routers are used to allow communication between VLANs if necessary.

You manage a network that uses a single switch. All ports within your building connect through the single switch. In the lobby of your building are three RJ-45 ports connected to the switch. You want to allow visitors to plug into these ports to gain internet access, but they should not have access to any other devices on your private network. Employees connected throughout the rest of your building should have both private and internet access. Which feature should you implement?

VLANs Use VLANs to segregate hosts based on switch ports. You could define two VLANs, one for employees connected throughout the building and another for the ports in the lobby. The ports in the lobby would have only internet access, while devices connected to ports in the rest of the building could communicate with other devices within the same VLAN.

The IT manager has asked you to create a separate VLAN to be used exclusively for wireless guest devices to connect to. Which of the following is the primary benefit of creating this VLAN?

You can control security by isolating wireless guest devices within this VLAN. The primary benefit of creating a VLAN for wireless guest devices to connect to is it allows you to control security by isolating wireless guest devices within this VLAN. Devices on this VLAN cannot communicate with other devices in other VLANs unless you allow traffic to get through with a router or Layer 3 switch. In this case, you would likely keep this wireless guest VLAN isolated from the rest of your network and only allow traffic from this VLAN to communicate with the internet.

You are creating a VLAN for voice over IP (VoIP). Which command should you use?

switchport voice vlan [number] To create a voice VLAN, use the switchport voice vlan [number] command.