ACC CH 3-4

Lakukan tugas rumah & ujian kamu dengan baik sekarang menggunakan Quizwiz!

To calculate total manufacturing costs, add direct materials, direct labor and ______.

applied manufacturing overhead

What side of the Manufacturing overhead account is actual manufacturing overhead entered on?

Always the debit side

Indicate which account should be debited and which account should be credited. Lubricating oil, waste cotton, and solder are used in the factory.

Debit: Manufacturing overhead Credit: Raw materials

Indicate which account should be debited and which account should be credited. Salary of the Production Supervisor is payable.

Debit: Manufacturing overhead Credit: Salaries and wages payable

Indicate which account should be debited and which account should be credited. Manufacturing overhead is applied to jobs using a predetermined overhead rate.

Debit: Work in process Credit: Manufacturing overhead

True or false: Traditional cost systems tend to undercost standard products and overcost specialty products.

False

The journal entry to record depreciation on factory equipment debits ______.

Manufacturing overhead and credits Accumulated depreciation

The Manufacturing Overhead account is debited when

actual overhead costs are incurred

A journal entry that debits Finished goods and credits Work in process records the ______.

completion of job

Applied manufacturing overhead will most likely ______ actual manufacturing overhead.

not equal

When labor costs are incurred, _________ are added directly to the Work in Process account.

only direct labor costs

Net operating income is calculated by subtracting

selling and administrative expenses; gross margin

Gross margin minus selling and administrative expenses equals ______.

net operating income

Usually, traditional costing ______ high-volume products and ______ low-volume products. (Overcosts or undercosts)

overcosts; undercosts

A journal entry that debits Advertising expense and credits Cash would record the incurrence of a

selling cost

Batch-level activities

Activities that are performed each time a batch of goods is handled or processed, regardless of how many units are in a batch. The amount of resources consumed depends on the number of batches run rather than on the number of units in the batch

Unit-level activities

Activities that arise as a result of the total volume of goods and services that are produced, and that are performed each time a unit is produced

Product-level activities

Activities that relate to specific products that must be carried out regardless of how many units are produced and sold or batches run

Work in process consists of:

Actual direct materials cost, actual direct labor cost, applied manufacturing overhead

The amount transferred from Work in Process to Finished Goods is

Cost of goods manufactured

A journal entry that debits Manufacturing overhead and credits Prepaid insurance records the:

expiration of prepaid factory insurance

True or false: Period costs flow from Finished Goods to Cost of Goods Sold.

false

Which of the following is a product-level activity? A.Processing units by hand B. General factory administration C. Processing purchase orders D. Administering parts inventories

D. Administering parts inventories

Costs of partially completed units are accounted for in ______.

work in process

Activity Cost pool

a "cost bucket" in which costs related to a particular activity measure are accumulated

Activity-based management

A management approach that focuses on managing activities as a way of eliminating waste and reducing delays and defects

A journal entry that debits Manufacturing overhead and credits Prepaid insurance records the

expiration of prepaid factory insurance

The journal entry to record issuing both direct and indirect materials into production debits

Work in process and Manufacturing overhead

The value of work in process is equal to ______.

the cost of all unfinished jobs

Benchmarking

A systematic approach to identifying the activities with the greatest room for improvement. It is based on comparing the performance in an organization with the performance of other, similar organizations known for their outstanding performance

Indicate which account should be debited and which account should be credited. Direct materials are issue into production for a specific job.

Debit: Work in process Credit: Raw materials

Indicate which account should be debited and which account should be credited. The wages of direct of laborers who worked on a particular job are payable.

Debit: Work in process Credit: Salaries and wages payable

When a job is completed, which account is debited?

Finished goods

When goods are sold on account, what accounts are credited?

Finished goods and Sales

The journal entry to record expired prepaid factory insurance debits

Manufacturing Overhead and credits Prepaid Insurance

True or false: The transfer of costs from one inventory account to the next parallels the physical transfer of goods from one inventory to the next.

True

Overhead is underapplied if ______.

actual overhead is more than applied overhead

The journal entry to record selling and administrative salaries debits ______.

an expense account and credits Cash or a liability

A journal entry that debits Work in process and credits Manufacturing overhead is recording the

application of manufacturing overhead costs

Schedule of cost of goods manufactured

contains three elements of product costs—direct materials, direct labor, and manufacturing overhead—and it summarizes the portions of those costs that remain in ending Work in Process inventory and that are transferred out of Work in Process into Finished Goods

The amount transferred from Work in Process to Finished Goods is ______.

cost of goods manufacturing

Activity measure

expresses how much of the activity is carried out and it is used as the allocation base for assigning overhead costs to products and services

When evaluating ABC product costs, managers should be particularly alert to costs that contain allocations of product____ product

facility or organization

The cost of goods is the sum of all amounts transferred from Work in process to Finished goods during a period

manufactured

All the cost appearing on the job cost sheets of the jobs that are being worked on are found in the ______ account.

work in process

A significant limitation of the ABC model is that the product costs computed will most likely be ______. A. less accurate than those computed using a conventional system B. understated for purposes of decision making C. overstated for purposes of decision making

C. overstated for purposes of decision making

Units of product that are only partially completed are put in which inventory?

Work In Process

Completed units that have not yet been sold are found in _____ _____ inventory.

Finished goods

When jobs are sold their costs are transferred out of

Finished goods

The journal entry to record the purchase of materials credits ______.

accounts payable

The schedule of cost of goods _____ summarizes costs that remain in Work in process inventory and that have been transferred from Work in process to Finished goods inventory.

manufactured

A journal entry that debits Manufacturing overhead and credits Property taxes payable records the

recognition of accrued property taxes

The schedule of cost of goods _______ summarizes costs that remain in Finished goods inventory and that have been transferred to Cost of goods sold.

sold

Cost of goods manufactured is the ______.

sum of all jobs transferred from Work in process to Finished goods

The activity rate is computed by dividing the ______ by the ______.

total cost in the activity cost pool; activity level in the activity cost pool

Units of product that are only partially complete are contained in the _________ inventory

work in process

What methods can be used to dispose of underapplied or overapplied manufacturing overhead?

Allocating it among Work in process, Finished goods, and Cost of goods sold OR Closing it out to Cost of Goods sold

The journal entry to record a completed job debits

Finished goods

A journal entry debiting Cost of goods sold and crediting Finished goods is made when ______.

goods are sold

Sales minus cost of goods sold equals ______

gross margin

Selling and administrative costs first appear on the

income statement

Labor costs charged to Manufacturing Overhead represent

indirect labor costs

A journal entry that debits Work in process and Manufacturing overhead and credits Raw materials records the ______.

issuance of materials

Finished goods ______.

consists of completed, unsold goods

Which of the following statements are true? A. When materials are purchased they are recorded in the Raw materials inventory account. B. Raw materials inventory represents the cost of materials not yet used in production. C. Raw materials inventory only includes the cost of direct materials. D. Direct labor costs flow through the Raw materials inventory account.

A. When materials are purchased they are recorded in the Raw materials inventory account. B. Raw materials inventory represents the cost of materials not yet used in production.

Which of the following costs are found on the balance sheet?

Raw Materials Manufacturing Overhead Direct Labor

A journal entry that debits Manufacturing overhead and credits Accounts payable would not be used to record

direct labor costs

Gross margin minus selling and administrative expenses equals ______. Multiple choice question. cost of goods sold

net operating income

A journal entry that debits Raw Materials and credits Accounts Payable is recording the ______.

purchase of materials

Implementing an activity-based costing system often results in a shift of overhead costs from: A. overpriced to underpriced products. B. unit-level to batch-level activities. C. high-volume to low-volume products. D. low-volume to high-volume products.

C. high-volume to low-volume products.

Which of the following best describes the journal entry to record the withdrawal of raw materials from the storeroom for use as direct and indirect materials in production? A. Debit Work in Process and credit Raw Materials. B. Debit Work in Process, debit Manufacturing Overhead, and credit Direct Materials. C. Debit Work in Process, debit Manufacturing Overhead, and credit Raw Materials. D. Debit Manufacturing Overhead and credit Raw Materials.

C. Debit Work in Process, debit Manufacturing Overhead, and credit Raw Materials.

Raw materials inventory represents the ________ not yet used in production.

cost of materials

The journal entry to record depreciation on office equipment debits ______.

Depreciation expense and credits accumlated depreciation.

Actual manufacturing overhead costs are recorded in the Manufacturing Overhead account

As they are incurred

All actual manufacturing overhead costs are debited or credited?

are debited to the Manufacturing Overhead account as they are incurred

The difference between the entries to record depreciation on office equipment and depreciation on factory equipment is that one ______.

debits Depreciation expense, while the other debits Manufacturing overhead

Benefits of activity-based costing include ______. A. more accurate product costs B. reducing the total overhead costs of a company C. helping target areas for process improvement D. helping managers understand the nature of overhead costs

A. more accurate product costs C. helping target areas for process improvement D. helping managers understand the nature of overhead costs

Activity-based costing improves accuracy of product costs by: A. using multiple-activity pools to accumulate overhead costs. B. relying on a single measure that causes overhead costs. C. implementing absorption costing approach for decision-making purposes. D. using departmental overhead rates that vary by process.

A. using multiple-activity pools to accumulate overhead costs.

If a company incurs $2,000 of factory rent, $1,000 of factory utilities, and $5,000 of miscellaneous factory costs, the journal entry to record these transactions would be to debit

Manufacturing overhead $8,000 and credit Accounts payable $8,000

Manufacturing overhead costs include ______..

- the factory supervisor's salary - factory insurance

Which of the following occurs when finished jobs are shipped to customers? A. Debit to Cost of Goods Sold. B. Debit to Finished Goods. C. Debit to Work in Process. D. Credit to Raw Materials.

A. Debit to Cost of Goods Sold.

Using direct-labor hours or another volume based cost driver to assign overhead ______. A. may result in selling products at a loss B. may result in overcharging customers for products C. can badly distort labor and material costs D. Ignores other significant causes of overhead

A. may result in selling products at a loss B. may result in overcharging customers for products D. Ignores other significant causes of overhead

Facility-level activities

Activities that are carried out regardless of which products are produced, how many batches are run, or how many units are made

Under an ABC system, overhead costs are allocated to the products using a two-stage process. What happens during the second stage of that process? A. We allocate the overhead costs to individual activity pools. B. We allocate the costs in the activity pools to the products using activity rates and activity measures. C. We identify the activity pools. D. We calculate the activity rate for each activity pool.

B. We allocate the costs in the activity pools to the products using activity rates and activity measures.

When a company applies overhead to production for the month of May, how will the company's account balances be affected on that spreadsheet? A. Accounts Payable will increase. B. Work in Process will increase. C. Manufacturing Overhead will increase. D. Retained Earnings will decrease.

B. Work in Process will increase.

When companies incur selling and administrative costs, those costs A. should be treated as product costs B. do not flow through the three inventory accounts C. should flow through the Manufacturing Overhead account D. should flow through the Work in Process account

B. do not flow through the three inventory accounts

Which of the following occurs when manufacturing overhead is applied to Work in Process? A. Debit to Cost of Goods Sold. B.Debit to Manufacturing Overhead. C. Credit to Work in Process. D. Credit to Manufacturing Overhead.

D. Credit to Manufacturing Overhead.

Which of the following occurs when a job has been completed and transferred to the finished goods warehouse? A. Debit to Cost of Goods Manufactured. B. Debit to Cost of Goods Sold. C. Credit to Finished Goods. D. Credit to Work in Process.

D. Credit to Work in Process.

Activity-based management involves focusing on activities to: A. avoid cost shifts due to the use of activity-based costing. B. identify a single allocation base that causes overhead costs. C. decrease the cost of implementing an activity-based costing system. D. eliminate waste, decrease processing time, and reduce defects.

D. eliminate waste, decrease processing time, and reduce defects.

Any purchased materials that will go into the finished products are first recorded in the _____ _____ inventory account.

Raw materials

The Manufacturing Overhead account is debited when ______.

actual overhead costs are incurred

Overhead is overapplied if

actual overhead is less than applied overhead

A journal entry debiting Salaries expense and crediting Salaries and wages payable could record

administrative salaries

Schedule of cost of goods sold

contains three elements of product costs—direct materials, direct labor, and manufacturing overhead—and it summarizes the portions of those costs that remain in ending Finished Goods inventory and that are transferred out of Finished Goods into Cost of Goods Sold

The journal entry that debits Work in Process and Manufacturing overhead and credits Salaries and Wages Payable is recording``

direct and indirect labor costs

A journal entry that involves Manufacturing overhead, Work in process, Finished goods, and Cost of goods sold is recorded to ______.

dispose of underapplied or overapplied overhead

A journal entry that debits Manufacturing overhead and credits Accounts payable could be made to record

factory utilities expense rent expense on factory equipment

When a job is completed, its costs are transferred into

finished goods

When cost systems were developed in the 1800's, most companies ______.

focused on simplicity produced a small number of similar products

Which of the following would not be charged to the Manufacturing overhead account?

nonmanufacturing

If there is a credit balance in the Manufacturing Overhead account of Y dollars, then the overhead is _____ by Y dollars

overapplied

True or false: Underapplied or overapplied overhead occurs because overhead is applied to jobs using a predetermined rate based on estimates of costs and activity levels.

true

If there is a debit balance in the Manufacturing Overhead account of X dollars, then the overhead is _____ by X dollars

underapplied

When a job is completed, the job costs are transferred OUT OF ______.

work in process


Set pelajaran terkait

Q Mental Health - Substance Abuse Quiz EXAM 2 Combine, Q Substance-Related Disorders Combine, Q Townsend: Unit 5 Combine, **QChapter 14: Substance Use and Addictive Disorders - has ques from test 5 - Combine, **Psych Unit 6 Quizes for Test #2** P, Q...

View Set

GEOG 202 Mastering Geography- Caribbean

View Set

CHP 6: Police Officers and Law Enforcement Operations

View Set

Cybersecurity - SSC 200 Final Exam Study Guide

View Set

The Conscious Reader Author Background Info

View Set

LDR 3332 Management and Leadership- CH 4

View Set