Auto CAD

The ______ control code is used to display the ø symbol

%%C

Which control code sequence would you to create the text o15 in single line text.

%%C15

The _____ control code is used to display the ° symbol

%%D

The ________ control code is used to display the + symbol

%%P

The _______ character is used to activate a transparent command

'

Named polite style tables are saved in file with the ______ file extension

.stb

The Auto CAD default compass orientation is ____ and the default angle direction is ____?

0° East counterclockwise

______ is the polar coordinate display of 2.750 unites at an angle of 90°

2.650<90

Setting the SPLINETYPE system variable to _______ let you draw a quadratic curve

5

A scale factor of _______ is used to plots a civil engineering drawing at a scale of 1"=60'

720

The _____ zoom option zooms the current display to the edge of the drawing limits

All

____ creates a backup copy of the active drawing.

Auto saves

Which f the following options allows you to edit justification setting of a table cell?

Cell alignment

Sheet can be published as ________ files

DFW

The _______ tools is used to move dimension text within a dimension line

DIMTEDIT

When a new sheet is added to sheet set using a template the sheet is saved with a _____ file extension by default

DWG

Attribute values included with an insert block are edited using the _____ tool

EATTEDIT

The ______ tool is used to turn solid fills off and on in AutoCAD

Fill

The scale factor for all dimension features in the drawing is set in the _______ tab in the New Dimension Style dialog box

Fit

The text tool's ______ justification option allows you to confine the text between two points with a selected text height.

Fit

Which of the DINCONSTRAINT tool allows you to place horizontal & vertical linear dimensional constraints

Linear

The ________ tab in the New Dimension Style dialog box is used to set the extension line extension

Lines

A sheet ______ acts as a table of contents for a sheet set

List

The ________ tools allows you to copy properties from in object to one of more objects

Matchprop

You can place mark a specified distance apart on a line with the _____ tool

Measure

The ______ tool allows you to create a reverse image of an object

Mirror

Titled viewpoints are created in ______

Model space

The _____ file extension is used by AutoCAD for text fronts

SHX

The_____ tool set an invisible grid that allows the crosshairs to move only exact increment.

Snap mode

Guidelines that specify operating drawing techniques and records keeping methods are known as

Standards

The _________ tolerance dimensioning methods is used to draw dimension text that display an equal bilateral tolerance in the plus/minus format

Symmetrical

A DWT file is a ______ file

Template

By default how is text in a field display differently from other single-line and multiline text

The text is larger

The ____ parameter allows you to assign multiple different views to object within block

Visibility

To calculate the result of 3+5 and then to multiply the result by 2 enter _____ in the quickcalc calculator

(3+5)*2

To input the same coordinates as previously type ______ when prompted

@

By default how does the appearance of the line of windows and crossing box differ

A window is solid and crossing box is dashed

Points located using ____ coordinates are measure from the origin.

Absolute

The quickcalc calculator can convert units relating to ______

All of the above

1'-31/2 is an example of the ____ units format.

Architectural

In order to store and protect original electronic drawing files before modifications are made you should _____ the sheet set

Archive

The __________ tool is used to create a circular arrangement of object

Array

Blocks drawn on layer 0 will

Assume the characteristics of the layer on which they are inserted

_____ refers to the use of alignment paths to aid in precise point location relative to existing points.

Auto tracking

The ______ tool enables you to assign a new insertion point to a drawing or block

BASE

__________ an external reference makes the xref a permanent part of the master drawing

Binding

The ______ dialog box is used to change an attribute definition after the attribute has been saved in block definition

Block attribute manager

What ribbon tab in addition to the parametric ribbon tab contains geometric constraint tools

Block editor

The insert dialog box is used to insert _____ into the current drawing

Blocks

The _____ tools allows you to add text to dimension using the Mtext option

Both B & C

Selecting a circle after entering the area option if the measuregeom tool returns the _______ of the circle in addition to the area

Circumference

Given the distance across the flare of a hexagon use the ______ option to draw the hexagon

Circumscribed

When you insert a table which of the following does not appear in the preview area of the insert table dialog box ?

Colin and row setting

The _____ geometric constraint allows you to align two lines or poly lines along the same line

Collinear

When entering several new lager names in the later properties manager enter a _____ after each name to save time.

Comma

The spacing layout and appearance of text is called

Composition

What takes the place of dimensional constraints in the block editor

Constraint parameter

In which direction should you pick a break portion out of a circle or arc

Counterclockwise

_______ is the deadly deletion option by autoCAD when the STRETCHED tool is selected from the menus browser

Crossing

The _____ selection options object entirely within or crossing the selection boundary

Crossing & Cpolygon

Blocks can be edited with the ______ tool

DDEDIT

15.50 is an example of the _____ units format.

Decimal

Drawing content can be shared between drawing files using the drag -&- drop capability of ____

Design center

_____ can be used to copy layer and line type from one drawing to another

Design center

You can place a specified number of mark along a line with the _____ tool.

Divide

In annotation text the annoyance scale is typically the same as the

Drawing scale

The _____ option in the plot dialog box is used to plot only the area of the drawing in which object are drawn

Extents

_________ will appear in a master drawing for later named WALL belonging to an external reference drawing named FLOORPLAN

FLOOR-PLAN/wall

A layer that ______ is not displayed on-screen and is not calculated by AutoCAD when the drawing is regenerated

Frozen

The ______ tool allows you to assign specific geometric constraints to object

Geomconstraint

The ____ button places a pattern of dots on the screen.

Grid display

The _____ tool is used to create a pattern of selection lines on a section view

Hatch

Picking the ___________ button in the hatch and gradient dialog box lets you select a previously drawn hatch pattern and use is form the current hatch layers settings

Inherit properties

The _____ tool can be used to change from drawing object lines to hidden lines

Line type

A scale action can be assigned to a(n)_________ parameter

Linear

The DIMEDIT _____ option is used to align dimensions to isometric planes.

None of the above

The isometric snap mode is active by enabling the isometric snap option in the

None of the above

The _____ tool is used to access an existing drawing.

Open

AutoCAD refers to rectangle coordinate dimensioning without dimension lines as ______ dimensioning

Ordinate

Enabling ____ mode forces lines to be drawn horizontally or vertically

Ortho

The ______ tool is used to remove unised objects from drawing g

PURGE

The part of an assembly drawing that provides information about each component of the assembly or subassembly is the

Part list

When creating a layer in the layer properties manager a line type can be assigned by

Picking the line type button

Points located using _____ coordinates are specified by a distance and an angle

Polar

Zero suppression settings for dimension text are made in the _______ tab in the New Dimension Style dialog box

Primary units

The _______ tool provides options for drawing chain and datum dimensions

QDIM

The ____ tool is used to create a selection set.

QSelect

The _____ tool instructs AutoCAD to recalculate all object in the drawing

REGEN

Points located using ____ coordinates are measure from the previous position rather than from the origin with X and G values

Relative

The _____ option of the DIMLINEAR tool is used to specify an angle for the dimension line

Rotated

The ______ tab in the New Dimension Style dialog box is used to specify a style that places dimension text above the dimension line

Text

The _____ tools lets you undo only one tool at a time

U

A ______ tolerance is permitted to increase or decrease in only one direction from the specified dimension

Unilateral

The _________ button in the dimension panel on the annotate ribbon tab can be used to quickly changed the style of the selected dimension to the current dimension stylw

Updated

Blocks created with the _____ tool are saved as separate drawing files

WELOCK

The PEDIT _____ vertex editing option lets you change the starting and ending widths of a polyline

Width

The ____ selection option requires that the object(s) be completely surrounded by

Window

An______ is a present environment that contains interface items specific to a job or task.

Workspace

The _____ tools allows you to display only selected areas of a Terence drawing

XCLIP

You can cycle through stacked objects during an editing operation if you hold down the ______ key & the space bar

[shift]