Ch 03.11.2 Expansion Buses

Accelerated Graphics Port

AGP was a dedicated bus type used by dedicated video cards.

Audio/Modem Riser Port

AMR was a riser card that attached to the motherboard and allowed additional cards (called daughter cards) to be installed.

Expansion Card

_____ are used to expand a computer's functionality or increase its performance. _____ are installed into the expansion slot on a motherboard. _____ and slots use different expansion bus standards that define communication specifications as well as physical characteristics.

Riser Card

_____ attach to the motherboard and can have expansion cards plug into them instead of the motherboard. The primary benefit is that by installing expansion cards parallel to the motherboard, it is possible to create a low profile design.

Peripheral Component Interconnect

(PCI) was developed to replace the obsolete ISA and VESA bus standards. PCI: +Is processor independent, meaning the CPU and PCI bus can process concurrently +Supports plug and play, meaning installed devices are detected and configured automatically +Most commonly used by devices such as sound cards, modems, network cards, and storage device controllers +Can run at 33 MHz and transfer data at 133 MB/s or run at 66 MHz and transfer data at 266 MB/s

PCI Extended

(PCI-X) was built on existing the PCI architecture and aimed to overcome standard PCI bandwidth limitations. PCI-X: +Uses a 64-bit interface to achieve faster data speeds +Operates at 133 MHz, resulting in data rates of 1.06 GB/s +Is typically used by servers for network cards or Fibre Channel adapters +Is backwards compatible with standard PCI slots (i.e., a PCI-X card can be installed in a standard PCI slot) When installed in a standard PCI slot, PCI-X cards are throttled down to standard PCI speeds.

PCI Express

(PCIe) was developed to replace PCI, PCI-X, and AGP. Instead of a shared bus, each PCIe slot links to a switch that prioritizes and routes data through a point-to-point dedicated connection and provides a serial, full-duplex method of transmission. PCIe uses several different connection types. +PCIe types are defined by the number of transmission lanes that are used to transfer data. For example, PCIe x1 provides one lane for transmission (x1), while PCIe x16 provides sixteen lanes for transmission. PCIe defines x2, x4, x8, x16, and x32 connection types. +PCIe data rates depend on the protocol version and number of transmission lanes: o 1.0: 250 MB/s (x1); 4 GB/s (x16) o 2.0: 500 MB/s (x1); 8 GB/s (x16) o 3.0: 1 GB/s (x1); 16 GB/s (x16) o 4.0: 2 GB/s (x1); 32 GB/s (x16) +In addition to greatly increased speed, PCIe offers higher quality service. +PCIe can run alongside legacy PCI technology (i.e., both PCIe and PCI buses can be in the same system). +PCIe x1 slots are typically used for network cards, USB cards, and sound cards. PCIe x16 slots are primarily used for dedicated video cards. PCIe cards are cross-size compatible, as long as the slot size is the same or larger than the card size. For example, a PCIe x1 card can be installed in a PCIe x16 slot, but a PCIe x16 card cannot be installed in a PCIe x1 slot.

Legacy Buses

Buses that have been replaced by newer types are considered _____. +Accelerated Graphics Port +Audio/Modem Riser +Communications Network Riser

Communications Network Riser

CNR was a riser card slot that allowed for installing network, sound, or modem functions.

Mini PCI

Small form factor computers (e.g., laptops or Mini-ITX systems) might include a _____ slot, which has either 100 or 124 pins and accepts _____ cards. A typical use for a _____ slot is to add internal cards (such as wireless cards) to laptops.