Ch6 practice test Communications II
Neighbor Discovery makes abundant use of messages
False
____ uses ICMPv6 type 136 messages.
Neighbor Advertisement
____ uses ICMPv6 type 135 messages.
Neighbor Solicitation
A node invokes the ____ process when it wants to send a packet to an on-link neighbor but the sender does not know the link-layer address for the target node.
Address Resolution
The ____ option, if included, is used in Mobile IPv6 by mobile nodes receiving Router Advertisement messages for their movement detection algorithm.
Advertisement Interval
The IPv6 Neighbor Discovery (ND) protocol is specified in RFC 4861 and RFC ____.
5942
IPv6 Neighbor Solicitation protocol can be compared with IPv4 ____.
ARP Request
IPv6 Duplicate Address Detection protocol can be compared with IPv4
Gratuitous ARP
The ____ option is sent in Router Advertisement messages to provide a common MTU value for nodes on the same network segment.
MTU
Neighbor Discovery performs many of the functions that ICMP Router Discovery and ICMP ____ handled in IPv4.
Redirect
____ use ICMPv6 type 137 messages.
Redirect
____ help keep local routing optimized in the face of changing conditions and also reflect status as various destinations come on- and off-link.
Redirects
In the ICMPv6 Router Solicitation message, the ____ field is an unused field that is set to 0 by the source node and ignored by the destination node.
Reserved
IPv6 Router Advertisement protocol can be compared with IPv4
Router Advertisement
Routers periodically send ____ messages to inform hosts of link prefixes (if address autoconfiguration is enabled), link MTU, valid and preferred lifetimes, and other possible options.
Router Advertisement
The Target Link-Layer Address option is used in Neighbor Advertisement and ____ messages
Router Advertisement
____ uses ICMPv6 type 134 messages.
Router Advertisement
____ is used by nodes to discover neighbor routers on the local link, learn prefixes, configure their default gateway, and other possible configuration parameters relating to autoconfiguration (stateless or stateful) useful to the node.
Router Discovery
By default, IPv6 nodes will send a ____ multicast request for configuration parameters immediately upon start-up
Router Solicitation
____ uses ICMPv6 type 133 messages.
Router Solicitation
Home Agents may include the Home Agent Information option in their Router Advertisement messages, but it should not be included if the Home Agent (H) bit is not set.
True
ND takes over the functions that ARP and Reverse ARP handled in IPv4.
True
Neighbor Discovery has five functional processes.
True
ND makes use of multicast addresses, such as the "____" address with link-local scope (FF02::1)
all nodes
ND makes use of multicast addresses, such as the "____" address with link-local scope (FF02::2)
all routers