CIS 1875- Chapter 4

Lakukan tugas rumah & ujian kamu dengan baik sekarang menggunakan Quizwiz!

Types of Copper Cabling

Coaxial Cable Unshielded Twisted-Pair (UTP) Cable Shielded Twisted-Pair (STP) Cable

Coaxial Cable

Consists of the following: 1. Outer cable jacket to prevent minor physical damage 2. A woven copper braid, or metallic foil, acts as the second wire in the circuit and as a shield for the inner conductor 3. A layer of flexible plastic insulation 4. A copper conductor is used to transmit the electronic signals. There are different types of connectors used with coax cable. Commonly used in the following situations: -Wireless installations-attach antennas to wireless devices -Cable internet installations-customer premises wiring

Characteristics of Copper Cabling

Copper cabling is the most common type of cabling used in networks today. It is inexpensive, easy to install, and has low resistance to electrical current flow. Limitations: -Attenuation-the longer the electrical signals have to travel, the weaker they get -The electrical signal is susceptible to interference from two sources, which can distort and corrupt the data signals (Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) and Crosstalk) -Mitigation: -Strict adherence to cable length limits will mitigate attenuation. -Some kinds of copper mitigate EMI and RFI by using metallic shielding and grounding -Some kinds of copper cable mitigate crosstalk by twisting opposing circuit pair wires together.

Fiber versus Copper

Optical fiber is primarily used as backbone cabling for high-traffic, point-to-point connections between data distribution facilities and for the interconnection of buildings in multi-building campuses.

Physical Components

Physical Layer Standards address three functional areas: -Physical Components -Encoding -Signaling The Physical Components are the hardware devices, media, and other connectors that transmit the signals that represent the bits. -Hardware components like NICs, interfaces and connectors, cable materials, and cable designs are all specified in standards associated with the physical layer.

Types of Fiber Media

Single-Mode Fiber -Very small core -Uses expensive lasers -long-distance applications Multimode Fiber -larger core -uses less expensive LEDs -LEDs transmit at different angles -up to 10 Gbps over 550 meters Dispersion refers to the spreading out of a light pulse over time. Increased dispersion means increased loss of signal strength. MMF has greater dispersion than SMF, with the maximum cable distance for MMF at 550 meters.

UTP Cabling Standards and Connectors

Standards for UTP are established by the TIA/EIA. TIA/EIA-568 standardizes elements like: -Cable Types -Cable Lengths -Connectors -Cable Termination -Testing Methods Electrical standards for copper cabling are established by the IEEE, which rates cable according to its performance. Examples include: -Category 3 -Category 5 and 5e -Category 6

Types of Wireless Media

The IEEE and telecommunications industry standards for wireless data communications cover both the data link and physical layers. In each of these standards, physical layer specifications dictate: -Data to radio signal encoding methods -Frequency and power of transmission -signal reception and decoding requirements -antenna design and construction Wireless Standards: -Wi-Fi (IEEE 802.11)-Wireless LAN (WLAN) technology -Bluetooth (IEEE 802.15)-Wireless Personal Area Network (WPAN) standard -WiMAX (IEEE 802.16)- uses a point-to-multipoint topology to provide broadband wireless access -Zigbee (IEEE 802.15.4) -low data-rate, low power, consumption communications, primarily for Internet of Things (IoT) applications

The Physical Connection

-Before any network communications can occur, a physical connection to a local network must be established. -this connection could be wired or wireless, depending on the setup of the network -this generally applies whether you are considering a corporate office or a home -a Network Interface Card (NIC) connects a device to the network -some devices may have just one NIC, while others may have multiple NICs (Wired and/or Wireless, for example.) -not all physical connections offer the same level of performance.

Shielded Twisted Pair (STP)

-Better noise protection than UTP -More expensive than UTP -Harder to install than UTP -Terminated with Rj-45 connectors -Interconnects hosts with intermediary network devices Key characteristics of STP 1. The outer jacket protects the copper wires from physical damage 2. Braided or foil shield provides EMI/RFI protection 3. Foil shield for each pair of wires provides EMI/RFI protection 4. Color-coded plastic insulation electrically isolates the wires from each other and identifies each pair.

Encoding

-Encoding converts the stream of bits into a format recognizable by the next device in the network path. -This 'coding' provides predictable patterns that can be recognized by the next device -Examples of encoding methods include Manchester, 4B/5B and 8B/10B

Properties of Fiber-Optic Cabling

-Not as common as UTP because of the expense involved -Ideal for some networking scenarios -Transmits data over longer distances at higher bandwidth than any other networking media -Less susceptible to attenuation, and completely immune to EMI/RFI -Made of flexible, extremely thin strands of very pure glass -Uses a laser or LED to encode bits as pulses of light -The fiber-optic cable acts as a wave guide to transmit light between the two ends with minimal signal loss

The Physical Layer

-Transports bits across the network media -Accepts a complete frame from the Data Link Layer and encodes it as a series of signals that are transmitted to the local media -this is the last step in the encapsulation process -the next device in the path to the destination receives the bits and re-encapsulates the frame, then decides wheat to do with it.

Unshielded Twisted Pair (UTP)

-UTP is the most common networking media -Terminated with RJ-45 connectors -Interconnects hosts with intermediary network devices Key characteristics of UTP 1. The outer jacket protects the copper wires from physical damage 2. Twisted pairs protect the signal from interference 3. Color-coded plastic insulation electrically isolates the wires from each other and identifies each pair.

Bandwidth

-bandwidth is the capacity at which a medium can carry data -digital bandwidth measures the amount of data that can flow from one place to another in a given amount of time; how many bits can be transmitted in a second. -Physical media properties, current technologies, and the laws of physics play a role in determining available bandwidth

Signaling

-the signaling method is how the bit values, "1" and "0" are represented on the physical medium -The method of signaling will vary based on the type of medium being used

Fiber Patch Cords

A yellow jacket is for single-mode fiber cables and orange (or aqua) for multimode fiber cables.

Fiber-Optic Cabling Usage

Fiber-Optic cabling is now being used in four types of industry: 1. Enterprise Networks- used for backbone cabling applications and interconnecting infrastructure devices 2. Fiber-to-the-Home (FTTH)- used to provide always-on broadband services to homes and small businesses 3. Long-Haul Networks- used by service providers to connect countries and cities 4. Submarine Cable Networks- used to provide reliable high-speed, high-capacity solutions capable of surviving in harsh undersea environments at up to transoceanic distances.

Wireless LAN

In general, a Wireless LAN (WLAN) requires the following devices: -Wireless Access Point (AP)- Concentrate wireless signals from users and connect to the existing copper-based network infrastructure -Wireless NIC Adapters-Provide wireless communications capability to network hosts There are a number of WLAN standards. When purchasing WLAN equipment ensure compatibility, and interoperability, Network Administrators must develop and apply stringent security policies and processes to protect WLANs from unauthorized access and damage.

Properties of Wireless Media

It carries electromagnetic signals representing binary digits using radio or microwave frequencies. This provides the greatest mobility option. Wireless connection numbers continue to increase. Some of the limitations of wireless: -Coverage area- effective coverage can be significantly impacted by the physical characteristics of the deployment location -interference- wireless is susceptible to interference and can be disrupted by many common devices -security- wireless communication coverage requires no access to a physical strand of media, so anyone can gain access to the transmission -shared medium- WLANs operate in half-duplex, which means only one device can send or receive at a time. Many users accessing the WLAN simultaneously results in reduced bandwidth for each user.

Bandwidth Terminology

Latency-amount of time, including delays, for data to travel from one given point to another Throughput-the measure of the transfer of bits across the media over a given period of time Goodput-the measure of usable data transferred over a given period of time, goodput=throughput-traffic overhead

Properties of UTP Cabling

UTP has four pairs of color-coded copper wires twisted together and encased in a flexible plastic sheath. No shielding is used. UTP relies on the following properties to limit crosstalk: -Cancellation-each wire in a pair of wires uses opposite polarity. One wire is negative, the other wire is positive. They are twisted together and the magnetic fields effectively cancel each other and outside EMI/RFI. -Variation in twists per foot in each wire-Each wire is twisted a different amount, which helps prevent crosstalk amongst the wires in the cable.


Set pelajaran terkait

Chapter 8 - Joints (Learn Smart)

View Set

Accounting 2331 Chapter 9 Pre-Chapter Reading Assignment

View Set

APUSH Midterm Questions He Gave Us

View Set

Recommended Maternal Success Questions Chapter 9: High-Risk Intrapartum

View Set

Proximate Cause and Strict Product Liability

View Set

PNE 103. Ch. 7: The Nurse-Client Relationship. Intro. Med-Surg. Nursing. Timby/Smith. 12th. Ed.

View Set

4.2: The presumption of innocence

View Set