CompTIA A+ 1001 Exam Questions
NetBIOS
137-139
SIP; VoIP
5060
Which of the following resources is the MOST critical when using file-storage synchronization applications? A. Disk speed B. I/O bandwidth C. RAM utilization D. CPU utilization
B. I/O bandwidth
Which of the following peripheral types is MOST likely to be used to input actions into a PC? A. Webcam B. Mouse C. Monitor D. Optical drive
B. Mouse
Which of the following connector types is used to terminate household telephone cabling? A. RG-6 B. RJ-11 C. RJ-45 D. RG-59
B. RJ-11
Which of the following connects a PC to its default gateway? A. NIC B. Switch C. Router D. Cable modem
B. Switch
A technician has noticed that when at company headquarters the laptop connection to the internet is more responsive than when using the company-provided phone as a hotspot. The technician updated the drivers on the WiFi NIC without resolution and then verified the configuration on the WiFi was correct. Which of the following configurations could cause the decreased performance? A. There is a low RFID signal B. The connection is throttled C. SSID is not found D. It is out of range
B. The connection is throttled
An end user reports a printer error that states (Replace filament). With which of the following types of printer is the end user MOST likely having problems? A. Ink jet B. Laser C. 3D D. Thermal
C. 3D
Which of the following is designed to function BEST in harsh lighting conditions? A. Large tablet B. E-reader C. smart watch D. Virtual reality headset
D. Virtual reality headse
POP3
110
NTP
123
IMAP4
143
SNMP
161-162
FTP
20-21
SSH
22
Telnet
23
SMTP
25
Terminal Server
3389
LDAP
389
SLP
427
Services Discovery Protocol
427
HTTPS
443
Microsoft DS
445
DNS
53
AFP
548
DHCP/BOOTP
67-68
HTTP
80
Which of the following ports are used for secure sessions? (2) A. 22 B. 23 C. 25 D. 80 E. 110 F. 443
A. 22 F. 443
A customer wants to upgrade a PC's internal storage to have more room to store backups, photos, and videos. The new storage should be large enough to avoid expanding again next year. Which of the following BEST meet these needs? A. 3TB HDD B. 50GB NAS C. 500TB SAN D. 512GB SSD
A. 3TB HDD
A user brings in a smartphone for repair. The device is unable to send/receive calls or connect to WiFi. all applications on the device are working unless they require connectivity. Which of the following is MOST likely causing the problem? A. Airplane Mode B. Tethering C. Disabled hotspot D. VPN
A. Airplane Mode
Which of the following peripherals would a company use to take inventory quickly and update price tags for products? (2) A. Barcode scanner B. Label printer C. Magnetic Reader D. KVM switch E. NFC device F. Flatted scanner
A. Barcode scanner C. Magnetic Reader
A user reports that a laptop is not connecting to the corporate wireless network. A technician confirms that with a smartphone the corporate wireless network is available and can be accessed. The technician observes that the Ethernet connection to the corporate network is working. The technician disconnected the Ethernet cable. Which of the following should the technician do NEXT to troubleshoot this problem? A. Confirm that the laptop wireless card is turned on. B. Confirm that the laptop is in range for the access point. C. Confirm that the correct wireless network is selected. D. Confirm the user's network logon ID and password.
A. Confirm that the laptop wireless card is turned on.
A business owner wants to provide security to laptop users with the ability to charge their devices, access corporate LAN resources, and allow for a variety of their removable hardware. Which of the following devices would BEST meet the owner's needs? A. Docking Station B. Port Replicator C. Thunderbolt D. USB hub
A. Docking Station
A technician is replacing a broken screen on a new company laptop but does not have repair information from the vendor. Which of the following is the BEST way to proceed? A. Document and label the cable and screw locations. B. Replace the screen with a non-OEM. C. Update the firmware on the device before repairing it. D. Wait for the vendor to provide more information.
A. Document and label the cable and screw locations.
A technician is setting up a new wireless network at a branch office that previously only had wired connectivity with statically assigned IP addresses. After setting up the network, the technician configures a server to provide IP addresses to wireless clients. During testing, the technician is unable to access the Internet or named network resources. The technician receives a valid IP address from the DHCP server and can ping the default gateway. Which of the following should the technician check NEXT to resolve this issue? A. Ensure the options are configured to provide a DNS server. B. Verify the Windows Firewall is turned off. C. Configure the wireless network's SSID to be hidden. D. Enable file and printer sharing in the OS
A. Ensure the options are configured to provide a DNS server.
A systems administrator is configuring a server to host several virtual machines. The administrator configures the server and is ready to begin provisioning the virtual machines. Which of the following features should the administrator utilize to complete the task? A. Hypervisor B. Disk Management C. Terminal Services D. Device Manager E. Virtual LAN
A. Hypervisor
An ISP has notified a SOHO user of a usage increase on the user's network. The user is concerned the WiFi network is being utilized by unauthorized users. Which of the following would minimize the unauthorized use of the WiFi network? A. Implement MAC filtering B. Enable NAT C. Create a network DMZ D. Upgrade the encryption standards
A. Implement MAC filtering
Several company users are frequently forgetting passwords for their mobile devices and applications. Which of the following should the systems administrator do to reduce the number of help desk tickets submitted? A. Implement single sign-on B. Enable multi factor authentication. C. Configure bio-metric authentication D. Remove complex password requirements
A. Implement single sign-on
A user reports that printing on heavy card stock paper results in the image smearing if touched. When printing on plain paper, the problem does not occur. Which of the following would be the NEXT troubleshooting step to perform? A. Increase the fuser temperature B. Change the paper feed rate C. Clean the transfer roller D. Replace the toner cartridge
A. Increase the fuser temperature
A technician is determining the specifications for a desktop computer that will be used at trade shows all over the world. The computer will have the maximum amount of RAM. The CPU, GPU, and storage will be typical of a business workstation. Which of the following system parameters is the MOST important for the technician to consider when choosing a power supply? A. Input Voltage B. Efficiency rating C. 12V rail amperage D. Number of SATA connectors
A. Input Voltage
A customer contacts the help disk stating a laptop does not remain charged for more than 30 minutes and will not charge more than 15%. Which of the following components are the MOST likely causes the issue? (3) A. LCD power inverter B. AC adapter C. battery D. Processor E. VGA card F. Motherboard G. Backlit keyboard H. Wireless antenna
A. LCD power inverter B. AC adapter C. battery
Joe, a user, has purchased a new mobile device that uses a different OS than his previous one. Joe wants to copy his contacts and appointments from his corporate account without entering them manually. Which of the following would be the BEST way for a technician to assist Joe? A. Log into the same email provider on the new device and restore the contacts and dates. B. Create a Bluetooth connection between Joe's devices and copy his contacts and calendar. C. Back up the old mobile device to a PC and import the contacts and schedule from the PC. D. Use NFC to transfer all compatible data from one device to the other.
A. Log into the same email provider on the new device and restore the contacts and dates.
A user accidentally spills liquid on a laptop. The user wants the device to be fixed and would like to know how much it will cost. Which of the following steps should the technician take NEXT to verify if the devices is repairable before committing to a price? (2) A. Remove the case and organize the parts B. Document the screw locations C. Search the Internet for repair tutorials D. Consult colleagues for advice
A. Remove the case and organize the parts B. Document the screw locations
An associate is seeking advice on which device to purchase for a friend who is a business owner. The friend needs the ability to chat activity while keeping in contact with the home office. Which of the following would be the BEST recommendation? A. Smart watch B. fitness monitor C. Global positioning sensor D. Portable hotspot
A. Smart watch
Some users are unable to access the Internet from their workstations. A technician runs the ipconfig command on one of the workstations and sees the following: IPv4 address 192.168.1.27 Subnet mask 255.255.255.0 Default gateway 192.168.1.1 A. There is a problem with a router in the office B. There is a problem with a DNS server in the office C. The users are not getting correct IP addresses from the DHCP server D. the wireless access point in the area is down
A. There is a problem with a router in the office
Ann, a user, needs to attend several day-long conferences and wants to ensure her mobile device will have enough power for these events. She is concerned about wall outlet availability at the conferences and needs to continuously use her device for important updates. Which of the following should a technician recommend to BEST accommodate Ann's needs? A. Wireless Charging Pad B. Built-in battery case C. Extra charging cords D. Airplane mode
A. Wireless Charging Pad
A company has very strict rules regarding proprietary information leaving the premises. All computers host proprietary information. A technician is called to repair a computer on-site at the company's corporate office. The technician identifies the troubleshooting steps to create a plan of action. The technician determines the computer needs to be taken off-site for repair. Which of the following should the technician do NEXT? A. check corporate policies for guidance. B. Get authorization from the manager. C. Delete proprietary data before leaving the building. D. Removes the HDD and send the device for repair.
A. check corporate policies for guidance.
During an inspection, it was found that data racks were not properly grounded. To pass the inspection and address a growing concern to protect data cabling and equipment, a technician must make sure all racks are properly grounded. Which of the following tools should the technician use to verify this has been completed? A. multimeter B. Cable tester C. Tone generator D. Voltmeter
A. multimeter
A technician wants to block remote logins to a server. Which of the following ports should be blocked? A. 21 B. 23 C. 80 D. 443
B. 23
Which of the following Ethernet cables would BEST support an application that requires a 600 Mbps throughput at the lowest price point? A. Cat 3 B. Cat 5 C. Cat 5e D. Cat 6
B. Cat 5e
A user is experiencing email problems and explains to a technician that all emails with graphics or images do not display the graphics. Which of the following configurations would correct this behavior? A. Change the email settings in antivirus B. Change the security settings of the email client C. Change the firewall security settings D. Change the email proxy settings E. Change the trusted sites in the browser settings
B. Change the security settings of the email client
A technician is troubleshooting a Windows CAD workstation that is running slow. The computer uses RAID 10 and has dual GPU cards. The user states that the same application runs faster on an identical workstation. Which of the following should the technician perform FIRST to troubleshoot the problem? A. Replace the write cache battery B. Check the event log any cache issues C. Clear the RAID configuration file and restart the PC D. Replace he RAID controller write cache module
B. Check the event log any cache issues
A user connects a laptop to a docking station but is unable to see an image on the external monitor. The user tests the docking station USB ports, and they are working fine. Which of the following should be done NEXT? A. Check for firmware updates B. Configure extended display mode C. Replace the external monitor D> Adjust the laptop's BIOS settings
B. Configure extended display mode
A server needs a RAM upgrade and a technician has been tasked with retrieving the RAM from storage and then installing it. Which of the following is the BEST RAM type for the technician to retrieve? A. SoDIMM B. DDR4 C. Single channel D. ECC
B. DDR4
A technician has been informed that multiple users are receiving duplicate IP address warnings on their workstations, and they are unable to browse the Internet. Which of the following server types should the technician log in to in order to resolve the problem? A. DNS server B. DHCP server C. Proxy server D. RADIUS server
B. DHCP server
Which of the following internet connection types often terminates at a switching center and then requires the use of a different media for the last mile to the customer? A. ISDN B. DSL C. Fiber D. Cable
B. DSL
Joe, a user, recently purchased a new multi function printer and attempted to install it himself. He informed a technician that the printer is on his list of printers, but he is unable to print. The technician sees that the printer is listed as a generic printer under Devices and Printers. Which of the following should the technician do NEXT? A. Reboot the computer into safe mode and try to print a test page B. Download the correct drivers from the manufacturer's website and install them C. Unplug the USB cable from the printer and try another USB slot on the PC D. Set the printer as the default within the device properties
B. Download the correct drivers from the manufacturer's website and install them
A customer wants to purchase a new home computer. The machine will mainly be used for internal browsing and streaming video, expect on weekends when the customer's son will use it to play games with friends. Which of the following should the technician focus on to meet these requirements? A. 80mm case fans B. Four-core processor C. RAID 5 array D. 16GB DDR2 memory E. Dual monitors F. Encrypted hard drive
B. Four-core processor
An analyst asks a technician to recommend a solution for a customer in the software development industry, where the customer can test a variety of OS's running the various applications that the customer produces. The customer wants to minimize the investment in hardware. Which of the following solutions should the technician recommended to BEST meet the customer's requirement? A. Purchase a number of low-cost devices, installing the required Os and applications on each one. Use separate machines for each testing environment. B. Purchases a high-end system meeting the hardware requirements for all of the individual OSs and applications. Configure VMs for each testing environment. C. Purchase one computer and create images for each computer configuration and OS. Re-image the machines for each testing environment
B. Purchases a high-end system meeting the hardware requirements for all of the individual OSs and applications. Configure VMs for each testing environment.
After upgrading a smartphone's OS, Joe, a user, reports the smartphone no longer connects to his automobile automatically when near it, Joe, restarts the smartphone, but the problem persists. Which of the following should a technician do NEXT to restore the previous functionality? A. Connect the smartphone to the automobile via USB B. Re-enable the smartphone's Bluetooth radio C. Perform a rollback of the smartphone's OS D. Pair the smartphone with the automobile
B. Re-enable the smartphone's Bluetooth radio
A technician has been asked to fix a problem with a projector. The projector lamp turns off for brief periods during a demonstration. After the technician replaced the lamp, the problem continued with an added message that appears just before the lamp turns off. Which o the following MOST likely need to be performed? (2) A. Change the video resolution B. Reset the lamp life counter C. Adjust the brightness D. Update the laptop video driver E. Replace the cooling fan F. Install a higher lumen lamp
B. Reset the lamp life counter E. Replace the cooling fan
A technician is buying a PC that will host three VMs running at the same time with the current configuration. The technician believes there might be a need to run several additional VMs in the near future. Which of the following resources would be the MOST important to upgrade to allow for additional VMs? A. CPU B. SSD C. NIC D. RAM
B. SSD
An end user signed up to use a web-based calendar application. Which of the following solutions has the user purchased? A. DaaS B. SaaS C. PaaS D. IaaS
B. SaaS
Ann, an accountant, reports that after turning on her new laptop, she received a message stating her IP address is already in use on the system. She tried going back to her old desktop, which she now only uses for email, but received the same message. The technician checks the account and sees a comment that Ann requires a special network setup to connect to the banking software. Which of the following should the technician do to resolve the issue? A. remove the static IP configuration from the desktop B. Set the laptop configuration to DHCP to prevent conflicts C. Replace the network card in the laptop, as it may be defective D. Bridge the LAN connection between the laptop and the desktop
B. Set the laptop configuration to DHCP to prevent conflicts
A technician is replacing an older video card with a new high-end video card in a workstation. The installation was successful, the new card seated properly and power is connected. However, upon booting, the computer now emits several beeps and will not boot, but shows no error messages. Which of the following is MOST liekly the cause of this issue? A. The BIOS is out-of-date B. The is not an PSU output C. There is an onboard RAM mismatch D. GPU is overclocked E> The firmware is out-of-date
B. The is not an PSU output
A user is having a problem printing a specific document type. The network printer OCP shows that the printer is online with no errors. Other users are not having the same issue. The user sends the document to another printer and the document prints. Which of the following should a technicians do FIRST in troubleshooting the problem? A. Stop and restart the PC print spooler service B. Verify the user is sending the document to the correct printer queue C. Have each user send the same document to the correct printer queue D. Stop and restart the print server queues and then have the user resend the document
B. Verify the user is sending the document to the correct printer queue
A user is no longer able to browse the internet after returning from vacation. The user is able to log in and navigate to the local intranet, but not to any outside sites. A technician pings a well-known website by name but gets no reply. The technician then pings its IP address and gets a reply? Which of the following commands will MOST likely resolve the issue? A, ipconfig /all B. ipconfig /flushdns C. ipconfig /release D. Ipconfig /setclassid
B. ipconfig /flushdns
A user logs on a PC and receives a message stating there is a duplicate IP address on the network. After a system restart, the user notices the same error. Which of the following is the MOST probable cause of the error? A. the user is still logged into another device. B. the user has set a static IP address. C. The user has moved to a different office D. The user has wireless and wired connections
B. the user has set a static IP address.
An end user wants to have a second monitor installed on a laptop. Which of the following would allow a technician to configure the laptop to show both screens once the cable is connected? A. Plug an external monitor into the USB port. B. Use the Fn and function key combination. C. Adjust the monitor display settings. D. Enable DisplayPort
C. Adjust the monitor display settings.
A technician is troubleshooting what appears to be a RAM issue on a PC. Which of the following symptoms would indicate if this is a RAM issue? A. POST code beeps B. Distended capacitors C. Continuous reboots D. Wrong BIOS time
C. Continuous reboots
A customer accidentally drops a laptop while it is charging. The next day, the customer notices the laptop will not turn on and calls a technician to investigate. the technician confirms the laptop will not turn on even though it is connected to the power adapter. Which of the following components is the MOST likely cause of this behavior? A. Power adapter B. Battery C. DC jack D. Hard drive
C. DC jack
A user wants to print a large job on both the front and back sides of the paper. Which of the following settings should the technician advise the user to change in the printer settings? A. Collate B. Orientation C. Duplex D. Transparency
C. Duplex
A network administrator must install a device that will proactively stop outside attacks from reaching the LAN. Which of the following devices would BEST meet the organization's needs? A. IDS B. Proxy Server C. IPS D. Authentication Server
C. IPS
An office has a network that has all computers connected to two switches. The switches are connected with a fiber cable. The computers and switches are all located in the same building. Which o the following network types does this describe? A. WAN B. PAN C. LAN D.MAN
C. LAN
A printer stops working in the billing department and cannot be repaired. A new printer has been ordered and a technician is tasked with allowing other users to print to the billing manager's printer until the new printer arrives. The manager's printer is currently used via USB connection, and there are no network jacks available or use. Which of the is the BEST way for the technician to allow access to the printer? A. Create a share on the manager's computer and give the users rights to the share. B. Install the printer on the users' desktops and point it to the IP address of the managers computer. C. Purchase a wireless printer so the users can access the printer via network. D. Provide flash drives to the users so they can transfer data to the manager's computer for printer.
C. Purchase a wireless printer so the users can access the printer via network.
Which of the following terminates a coaxial cable? A. DB9 B. RJ45 C. RG59 D. RS-232
C. RG59
Which of the following cloud computing concepts allows scalable services to be provided to the client? A. On-demand B. Metered C. Rapid elasticity D. Resource pooling
C. Rapid elasticity
Whenever a user's machine is turned on, a black screen appears prompting the user for an administrative password. The technician has no such password on file for this machine. Which of the following steps should the technician take to resolve this issue? A. Press and hold the CPU power button for five seconds, then power back on B. Disconnect and reconnect the internal hard drive C. Remove the CMOS battery and reinsert it after ten seconds D. Remove the motherboard and place it back into the machine after ten minutes
C. Remove the CMOS battery and reinsert it after ten seconds
A user printed several documents to a shared network copier and noticed that they have very faint color density. A technician investigates the issue and verifies that the printer has a maintenance kit installed recently. Which of the following next steps will MOST likely resolve the issue? (2) A. Adjust the printer settings B. Replace the fuser module C. Replace the toner cartridges D. Replace the developer E. Empty the waste toner bottles F. Clean the paper tray rollers
C. Replace the toner cartridges F. Clean the paper tray rollers
Company management wants to be able to give users he ability to work remotely during periods of bad weather. Which of the following should be enabled to allow the workforce to do this? A. NAT B. VLAN C. VPN D. HIPS
C. VPN
A user has reported application connectivity problems to the network administrator. The network administrator knows there have been firewall configuration changes recently by a security vendor and believes the issue could be related to a port being closed on the firewall. Which of the following should the network administrator do NEXT? A.See of the same application fails on another workstation. B. Go into the firewall and open the port. C. Verify system functionality on the user's workstation. D. Document the issue for future reference.
C. Verify system functionality on the user's workstation.
A technician is setting up a VM for use in testing software deployments. The VM is offline, but the hypervisor is not. Which of the following settings should the technician change to resolve this issue? A. Virtual security B. Virtual storage C. Virtual CPU D. Virtual Switch E. Virtual RAM
C. Virtual CPU
A technician is ordering a new motherboard and processors for a company email server. When reviewing the vendor licensing agreement, the technician sees that there is a flat per-socket licensing fee. Which of the following motherboard/processor combinations should the technician order to get the BEST performance while minimizing licensing fees? A. A dual-processor motherboard with six hyper threaded cores each B. A sing-processor motherboard with hyper threaded eight cores C. A dual-processor motherboard with eight overclocked cores each D. A single-processor motherboard with ten overclocked cores
D. A single-processor motherboard with ten overclocked cores
Which of the following features will save the battery life of a laptop significantly if they are disabled? (2) A. touchpad B. Volume C. Screen orientation D. Cellular E. Bluetooth F. Fingerprint reader
D. Cellular E. Bluetooth
Several computers are having network connectivity issues. Two of the computers are wires and are not having issues. The technician verifies that none of the computers having issues have been assigned a static IP. Which of the following should the technician check NEXT? A. Check the closet AP for the area B. Check each wireless adapter switch C. Check the group's network switch D. Check the DHCP server
D. Check the DHCP server
Multiple users report that the network printer, which is connected through the print server, is not printing. Which of the following should a technician do FIRST to remedy this situation? A. Replace the USB cable B. Reinstall the drivers on the user's PCs C. Have the users restart their PCs D. Clear the print queue
D. Clear the print queue
A server administrator set up a VM to be used in a lab setting. A technician is setting up thin-client computers to access this VM. Which of the following tasks are required to complete the project? (3) A. Connect the device to a printer B. Install the operating system C. Install a USB keyboard and mouse D. Connect the device to the network E. Install the latest system updates F. Install the latest device drivers G. Connect the device to a monitor H. Install the necessary applications
D. Connect the device to the network E. Install the latest system updates H. Install the necessary applications
A user purchases a wireless printer and sets it up in office. The user installs all necessary software for the printer on the computer and connects the printer to the guest wireless network. However, when the user attempts to print to the printer, nothing happens. Which of the following ill resolve the issue? A. Set up the user's computer to act as a print sever B. Configure the printer to use the Internet printing protocol C. Ensure the user's computer is set to DHCP D. Connect the printer to the company wireless network
D. Connect the printer to the company wireless network
A technician is replacing the LCD panel in a laptop. Which of the following components is MOST likely to be damaged accidentally during the repair? A. Bezel B. Hinge C. Motherboard D. Digitizer
D. Digitizer
the touchscreen feature on a Windows device has stopped working. Which of the following should the technician check FIRST? A. Device Manager B. Performance Monitor C. System configuration D. Digitizer settings
D. Digitizer settings
Which of the following cable types should be used to connect a cable modem to a SOHO router? A. Thunderbolt B. Coaxial C. USB D. Ethernet
D. Ethernet
A customer's laptop display has suddenly become very dim. The image of the display can only be seen with a bright, external light, as adjusting the brightness/ contrast controls does not cause much change. Which of the following components MOST likely needs to be replaced? A. LCD panel D. Inverter C. Video Card D. Digitizer
D. Inverter
A user's laptop is shutting down unexpectedly. this technician discovers the shutdown only happen when the laptop is moved from one room to another. The technician reseated the hard drive, memory, battery, and LCD cable, but the laptop continues to shut down. Which of the following is the MOST probable cause of the issue? A. Residual energy on the motherboard B. System overheating C. Distended capacitors D. Loose battery connection
D. Loose battery connection
A technician was called to check an unexpected clicking noise on a desktop that has become more frequent every time a video editing application is loaded. The system fans have been replaced, but the clicking noise remains. Diagnostics have been run on the video card. Which of the following should the technicians do FIRST? A. Replace the hard drive B. Replace the video card C. Do a System Restore D. Perform a full data backup E. Scan the system for viruses
D. Perform a full data backup
A technician is talking to end users about the specifications for an upgraded application server. Te users of the application report that there cannot be any unscheduled downtime or data loss. Additionally, they would like the performance of the application to improve over the previous server in any way possible. The previous server is running RAID 5. Which of the following RAID solutions should be implemented in this scenario? A. RAID 0 B. RAID 2 C. RAID 6 D. RAID 10
D. RAID 10
A technician is configuring a new web server and must have over 10TB of fault-tolerant storage, while minimizing the number of failure points. The applications on the server also require the highest perfromamnce availbale. Which of the follwoing configurations would the technician MOST likely select? A. RAID 1 with 1500rpm 15TB drives B. RAID 0 with 1000 rpm 8TB drives C. RAID 5 with 7200rpm 5 TB drives D. RAID 10 with 5400rpm 6TB drives
D. RAID 10 with 5400rpm 6TB drives
A network administrator is troubleshooting a network that is not loading the local Windows 10 operating system. All the computers inside the company are installed using UEFI mode selected. The message on the screen shows a failed attempt to connect a PXE server. When requested, the end user reported trying to improve the computer speed by changing some BIOS configurations randomly. Which of the following should the network administrator check FIRST inside BIOS? A. C-states should be configured to 2 B. Secure Boot should be enabled C. Walk-on LAN should be unchecked D. The PXE server address should be set
D. The PXE server address should be set
A technician upgraded the memory on a server from two 8GB sticks to eight 32GB. The server memory is now at full capacity per the user guide. When the technician powers on the system, only 128 GB of memory is recognized by the OS and the BIOS. The technician decides to upgrade to the latest version of the firmware on the system, which does not help. Next., the technician installs the memory in sets of 64GB at a time. Each individual set of 64GB is fully recognized by the server. Which of the following will not allow the server to recognize all of the memory install at the same time? A. The power supply is not supplying enough power for the memory B. The memory has too many ECC errors and is shutting down C. The server is overheating when all of the memory is installed D. The server needs DDR4 memory and DDR3 is installed
D. The server needs DDR4 memory and DDR3 is installed
Which pf the following charging and data ports has a non-directional connector? A. micro USB B. Mini USB C. USB A D. USB C
D. USB C
A technician needs to routinely run scripting commands in Linux but does not want to walk over the server room every time to perform the task. The technician also travels between buildings and has a Windows 10 laptop with 4GB of memory and a fully partitioned 500GB hard drive. Which of the following steps should the technician take to resolve this issue? (2) A. Increase the memory to 8GB B. Install a Linux guest VM C. Add another 500 Gb hard drive D. Create a Linus LiveBoot CD E. Repartition the hard drive F. Install Linus on a new ext3 partition
E. Repartition the hard drive F. Install Linux on a new ext3 partition
