Exam 2 ITEC 145

Lakukan tugas rumah & ujian kamu dengan baik sekarang menggunakan Quizwiz!

Refer to the exhibit. What three facts can be determined from the viewable output of the show ip interface brief command? (Choose three.)

- The switch can be remotely managed.* - One device is attached to a physical - - interfaceThe default SVI has been configured.

Passwords can be used to restrict access to all or parts of the Cisco IOS. Select the modes and interfaces that can be protected with passwords. (Choose three.)

- VTY interface - console interface -privileged EXEC mode

A network administrator is planning an IOS upgrade on several of the head office routers and switches. Which three questions must be answered before continuing with the IOS selection and upgrade? (Choose three.)

- What models of routers and switches require upgrades?* - Do the routers and switches have enough RAM and flash memory for the proposed IOS versions? * - What features are required for the devices?*

Refer to the exhibit. A network technician is testing connectivity in a new network. Based on the test results shown in the exhibit, which device does the technician have connectivity with and which device does the technician not have connectivity with? (Choose two.)

-connectivity: switch 2 -no connectivity: PC-C

What is a result of using the service password-encryption command on a Cisco network device?

All passwords in the configuration are not shown in clear text when viewing the configuration.*

Match the description to the common IOS CLI access method.

Console port It displays startup, debugging, and error messages by default.* It can be used to restore an out-of-box configuration on a switch or router.* Virtual interface It allows access throught use of Telnet or SSH protocols.* It requires an active network connection.* AUX port It connects throught dialup connections* It is not supported on Catalyst switch devices*

What criterion must be followed in the design of an IPv4 addressing scheme for end devices?

Each IP address must be unique within the local network

In your opinion (this has no bearing on your grade), please indicate how enthusiastic you are about the content of this course and the things you're learning (or have learned):

Enthusiastic

A new network administrator has been asked to enter a banner message on a Cisco device. What is the fastest way a network administrator could test whether the banner is properly configured?

Exit privileged EXEC mode and press Enter.

Which two features are characteristics of flash memory? (Choose two.)

Flash provides nonvolatile storage.* The contents of flash may be overwritten

What benefit does DHCP provide to a network?

Hosts can connect to the network and get an IP address without manual configuration.*

In your opinion (this has no bearing on your grade), please indicate your interest in this course:

Interested*

While trying to solve a network issue, a technician made multiple changes to the current router configuration file. The changes did not solve the problem and were not saved. What action can the technician take to discard the changes and work with the file in NVRAM?

Issue the reload command without saving the running configuration.*

Which statement is true about the running configuration file in a Cisco IOS device?

It affects the operation of the device immediately when modified.

How does the service password-encryption command enhance password security on Cisco routers and switches?

It encrypts passwords that are stored in router or switch configuration files.

Which two host names follow the guidelines for naming conventions on Cisco IOS devices? (Choose two.)

RM-3-Switch-2A4* SwBranch799

A network administrator needs to keep the user ID, password, and session contents private when establishing remote CLI connectivity with a switch to manage it. Which access method should be chosen?

SSH*

Match the difinitions to their respective CLI hot keys and shortcuts.

Tab -> Completes abbreviated commands and parameters Ctrl-R -> returns directly to the privileged EXEC mode Up Arrow -> scrolls backwards through previously entered commands Ctrl-Z -> cancels any command currently being entered and returns directly to privileged EXEC mode Ctrl-C -> Redisplays, on a new line, the command currently being typed

A technician is adding a new PC to a LAN. After unpacking the components and making all the connections, the technician starts the PC. After the OS loads, the technician opens a browser, and verifies that the PC can reach the Internet. Why was the PC able to connect to the network with no additional configuration?

The PC was preconfigured to use DHCP.

What are two characteristics of RAM on a Cisco device? (Choose two.)

The configuration that is actively running on the device is stored in RAM. * The contents of RAM are lost during a power cycle. *

What is the function of the kernel of an operating software?

The kernel provisions hardware resources to meet software requirements.

What is the function of the kernel of an operating system?

The kernel provisions hardware resources to meet software requirements.*

Refer to the exhibit. A switch was configured as shown. A ping to the default gateway was issued, but the ping was not successful. Other switches in the same network can ping this gateway. What is a possible reason for this?

The no shutdown command was not issued for VLAN 1.*

Which procedure is used to access a Cisco 2960 switch when performing an initial configuration in a secure environment?

Use the console port to locally access the switch from a serial or USB interface of the PC.

Which interface is the default SVI on a Cisco switch?

VLAN 1

In your opinion (this has no bearing on your grade), please rate your motivation to do well in this course:

Very Motivated

Match the definitions to their respective CLI hot keys and shortcuts. (Not all options are used.) Question

completes abbreviated commands and parameters displays the next screen scrolls backwards through previously entered commands - not scored - provides context-sensitive help aborts commands such as trace and ping

Which two functions are provided to users by the context-sensitive help feature of the Cisco IOS CLI? (Choose two.)

displaying a list of all available commands within the current mode* determining which option, keyword, or argument is available for the entered command*

Which command or key combination allows a user to return to the previous level in the command hierarchy?

exit

What is a user trying to determine when issuing a ping 10.1.1.1 command on a PC?

if there is connectivity with the destination device

What command can be used on a Windows PC to see the IP configuration of that computer?

ipconfig

Which two characters are allowed as part of the hostname of a Cisco device? (Choose two.)

numbers* dash*

An administrator is configuring a switch console port with a password. In what order will the administrator travel through the IOS modes of operation in order to reach the mode in which the configuration commands will be entered? (Not all options are used.)

second mode final mode third mode first mode

Which information does the show startup-config command display?

the contents of the saved configuration file in the NVRAM *

Which interface allows remote management of a Layer 2 switch?

the switch virtual interface

Refer to the exhibit. A network administrator is configuring the MOTD on switch SW1. What is the purpose of this command?

to display a message when a user accesses the switch*

Why would a Layer 2 switch need an IP address?

to enable the switch to be managed remotely

Why is it important to configure a hostname on a device?

to identify the device during remote access (SSH or telnet)

A router has a valid operating system and a configuration file stored in NVRAM. The configuration file contains an enable secret password but no console password. When the router boots up, which mode will display?

user EXEC mode

A router has a valid operating system and a configuration stored in NVRAM. When the router boots up, which mode will display?

user EXEC mode

A router with a valid operating system contains a configuration file stored in NVRAM. The configuration file has an enable secret password but no console password. When the router boots up, which mode will display?

user EXEC mode


Set pelajaran terkait

Chapter 10 Bed making and Unit Care

View Set

MKTG Chapter 5: Understanding Consumer and Business Buyer Behavior

View Set

PrepU Questions Ch 1: The Nurse's Role in Health Assessment

View Set

Life Insurance Practice Exam Questions

View Set

Oliver Twist Edmodo Quiz answers

View Set

Chapter 11 C++ Class Inheritance

View Set

Chapter 2 - Network Infrastructure and Documentation

View Set

not working, people at work, useful phrases

View Set