HRM Ch 16
Which of the following factors is LEAST likely to contribute to accidents at work? A) unsafe conditions B) nature of the work C) day of the week D) time of day
C) day of the week
All of the following are symptoms of employees in advanced stages of alcoholism EXCEPT ________. A) drinking on the job B) walking with an unsteady gait C) delegating job responsibilities D) showing incompetent job performance
C) delegating job responsibilities
Which of the following is a personal factor that can lead to stress? A) poor supervision B) pace of work C) divorce D) job security
C) divorce
Which of the following is one of the earliest indicators of an employee's possible alcoholism? A) mood swings B) forgetfulness C) missed deadlines D) personal neglect
C) missed deadlines
T/F A recent survey indicates that approximately 35% of the U.S. workforce has either been hung over at work or been impaired while on the job at least once during the previous year.
False
T/F Scaffolding, fall protection, hazard communication, electrical disengagement, and respiratory problems are the most frequent OSHA inspection violation categories.
True
T/F Tardiness and lying are early-stage behaviors that indicate a worker's possible alcoholism.
True
T/F Woodworking machines, flywheels, and saws cause the most serious workplace injuries.
True
Which of the following is NOT one of the primary methods of dealing with a current employee who tests positive for illegal drugs? A) arrest B) discipline C) in-house counseling D) referral to outside counseling
A) arrest
According to SHRM survey, ________ percent of responding organizations now have some type of formal disaster plan. A) 20 B) 85 C) 47 D) 93
B) 85
What percent of the US workforce has been impaired on the job (due to alcohol or illegal drugs) at least once during the previous year? A) Eight B) Fifteen C) Twenty-seven D) Forty-three
B) Fifteen
Under OSHA, employers with ________ or more employees must maintain records of and report occupational injuries and occupational illnesses. A) 6 B) 11 C) 35 D) 50
B) 11
When a complaint indicates the possibility of imminent danger, OSHA conducts an inspection within ________. A) 12 hours B) 24 hours C) 3 days D) 20 days
B) 24 hours
While accident rates are falling, in one recent year ________ U.S. workers died in workplace incidents. A) 2369 B) 4405 C) 6278 D) 8100
B) 4405
Research estimates that health care costs are ________ higher for highly stressed workers than for workers who experience low amounts of stress. A) 10% B) 25% C) 46% D) 75%
C) 46%
OSHA standards list exposure limits for about how many chemicals? A) 50 B) 200 C) 600 D) 1200
C) 600
Which of the following is a true statement regarding workplace smoking? A) Workplace smoking rules are determined by local unions and federal laws. B) OSHA requires employers to establish designated smoking areas. C) Employers may dismiss workers because they smoke at home. D) The ADA protects the rights of workers to smoke at work.
C) Employers may dismiss workers because they smoke at home.
Thermo is a plastic supply and custom fabrication company. Thermo serves clients in the medical, solar, and semiconductor industries by making acrylic and polycarbonate sheets, tubes, and rods. The company employs approximately 500 workers at its facility in Ohio. Safety is a top priority at Thermo, and supervisors are required to conduct daily inspections of all equipment. Recently, three workers were seriously injured by a large press used to mold plastic parts. The workers spent time in the hospital for hand injuries, and they are currently recuperating at home. As a result, top management is evaluating all aspects of safety at the facility to determine what changes need to be made. Which of the following, if true, supports the argument that Thermo needs to modify its screening, placement, and training procedures? A) Interviews with the on-duty supervisor indicate that signs were clearly posted near the accident site explaining the importance of using protective guards. B) Supervisors use a combination of recognition and monetary incentives to encourage employees to follow safety procedures. C) Interviews with the injured workers indicate that the most experienced worker removed the safety guard and the other two workers did not know how to respond. D) Noise emitted from the press and the heat in the Thermo facility is considered distracting and potentially dangerous.
C) Interviews with the injured workers indicate that the most experienced worker removed the safety guard and the other two workers did not know how to respond.
T/F Repetitive motion disorders include disorders such as carpal tunnel syndrome and tendonitis, and result from too many uninterrupted repetitions of an activity or motion, or from unnatural motions such as twisting the arm or wrist.
True
New computers emit chemical fumes, which are linked to sick building syndrome symptoms like headaches and runny noses True or False
True
Thermo is a plastic supply and custom fabrication company. Thermo serves clients in the medical, solar, and semiconductor industries by making acrylic and polycarbonate sheets, tubes, and rods. The company employs approximately 500 workers at its facility in Ohio. Safety is a top priority at Thermo, and supervisors are required to conduct daily inspections of all equipment. Recently, three workers were seriously injured by a large press used to mold plastic parts. The workers spent time in the hospital for hand injuries, and they are currently recuperating at home. As a result, top management is evaluating all aspects of safety at the facility to determine what changes need to be made. Which of the following questions is LEAST relevant to Thermo's decision to minimize unsafe acts at the facility? A) Have Thermo managers trained employees in the use of the company's mechanical security system? B) How are employee safety suggestions and complaints currently handled by Thermo managers? C) How are Thermo employees rewarded or praised for adhering to safety rules and procedures? D) What is the current level of employee involvement in designing Thermos' safety program?
A) Have Thermo managers trained employees in the use of the company's mechanical security system?
How do managers reduce unsafe acts through selection? A) identify traits linked to job accidents and screen candidates for such traits B) train employees on the safe and proper use of equipment and tools C) rotate employees through different positions within the company D) offer monetary incentives to employee teams with low accident rates
A) identify traits linked to job accidents and screen candidates for such traits
Which of the following best describes the primary purpose of the Occupational Safety and Health Administration? A) set and enforce the safety and health standards for almost all workers in the U.S. B) ensure that employees of state agencies have safe and healthy working conditions C) provide safe and healthy working conditions to all self-employed persons D) ensure that family farms provide healthy and safe working environments
A) set and enforce the safety and health standards for almost all workers in the U.S.
As an HR manager, you need to be aware of the symptoms of burnout among employees. Which of the following is most likely NOT a sign of employee burnout? A) irritability B) absenteeism C) entrapment D) resentment
B) absenteeism
Toyota uses cadmium pigments in the paint for its cars. At the Toyota plant, air samples are frequently taken as a precautionary measure to ensure that employees are not exposed to levels outside the OSHA safety standards. Which of the following best describes this situation? A) job simulation tests B) unsafe conditions C) industrial hygiene D) screening
C) industrial hygiene
Employee depression results in as many as ________ total lost workdays in the United States each year. A) 5 million B) 16 million C) 43 million D) 68 million
D) 68 million
________ is defined as the total depletion of physical and mental resources caused by excessive striving to reach an unrealistic work-related goal. A) Depression B) Job stress C) Anxiety D) Burnout
D) Burnout
Which government agency enforces the standards set out in the Occupational Safety and Health Act? A) Department of Health and Human Services B) Department of Agriculture C) Department of Commerce D) Department of Labor
D) Department of Labor
________ is "the process of assessing exposures to loss within an operation and determining how best to eliminate, manage or otherwise reduce the risk of an adverse event from having a negative impact on the business." A) Workplace safety B) Security C) Crisis management D) Risk management
D) Risk management
Which of the following is conducted by an agency to determine if a work site is in compliance with safety laws and regulations? A) security plan B) workplace review C) job hazard analysis D) operational safety review
D) operational safety review
Which of the following is NOT a method of minimizing workplace accidents? A) reducing unsafe conditions B) reducing unsafe acts C) screening employees D) paying better wages
D) paying better wages
Experts suggest that burnout can most effectively be reduced by ________. A) telecommuting B) taking long vacations C) changing careers D) reassessing goals
D) reassessing goals
T/F For dealing with hazardous substances, personal protective gear is generally the first option.
True
T/F Many employers today are banning mandatory overtime due to the increased likelihood of a workplace accident caused by employee fatigue.
True
T/F Matthew, an electrician at Carver Industries, cut his hand while splicing wires. Matthew received first aid treatment before returning to work. Carver Industries is required by OSHA to report Matthew's injury.
False
T/F Most employers do not deal with substance abuse until after a worker is hired.
False
T/F Positive reinforcement programs identify the worker behaviors that lead to accidents and then train workers to avoid these behaviors.
False
T/F The fatality rate of young workers is nearly three times that of older, more experienced workers
False
T/F The first step of an effective and comprehensive corporate anti-crime program involves installing an advanced alarm system and metal detector at every entrance.
False
T/F Workplace safety relates to protecting employees from internal and external security risks such as criminal acts by outside perpetrators and terrorism.
False
One of the primary duties of a supervisor in regards to workplace safety is to conduct a daily walk-through of a work site. True or False
True
T/F About 30% of workplace attacks are committed by coworkers.
True
T/F An occupational illness is any abnormal condition or disorder caused by exposure to environmental factors associated with employment.
True
T/F Comfort, fit, durability, and convenience are primary concerns regarding personal protective equipment
True
T/F Pre-employment drug testing tends to discourage drug users from applying for jobs or for applying with companies that perform drug tests.
True
T/F Safety awareness programs involve trained supervisors orienting new workers regarding common safety hazards and simple prevention methods in the workplace.
True
T/F Workplace accidents occur more often during night shifts than during daytime shifts.
True
What types of unsafe conditions are the primary focus of OSHA standards? How does OSHA enforce its standards?
Unsafe conditions are a main cause of accidents. They include things like: • Improperly guarded equipment • Defective equipment • Hazardous procedures in, on, or around machines or equipment • Unsafe storage—congestion, overloading • Improper illumination—glare, insufficient light • Improper ventilation—insufficient air change, impure air source The solution here is to identify and eliminate the unsafe conditions. The main aim of the OSHA standards is to address these mechanical and physical accident-causing conditions. OSHA enforces its standards through inspections and (if necessary) citations. The inspection is usually unannounced. OSHA may not conduct warrantless inspections without an employer's consent. However, it may inspect after acquiring an authorized search warrant or its equivalent. With a limited number of inspectors, OSHA recently has focused on "fair and effective enforcement," combined with outreach, education and compliance assistance, and various OSHA-employer cooperative programs.
Discuss what a job hazard analysis is and how it can be conducted.
ob hazard analysis involves a systematic approach to identifying and eliminating such hazards before they cause accidents. According to OSHA, job hazard analysis "focuses on the relationship between the worker, the task, the tools, and the work environment," and ends by reducing the potential risks to acceptable levels. Consider a safety analyst looking at the Yale science lab, with the aim of identifying potential hazards. Performing a job hazard analysis here might involve looking at the situation and asking these questions: What can go wrong? A student's hair or clothing could become caught in the lathe, a rotating object that "catches" it and pulls it into the machine. What are the consequences? The student could receive a severe injury as his or her body part or hair is caught and drawn into the spinning lathe. How could it happen? The accident could happen as a result of the student leaning too close to the lathe while working at the bench, or walking too close to the lathe, or bending to reach for an article that fell close to the lathe. What are other contributing factors? Speed is one contributing factor. The problem would occur so quickly that the student would be unable to take evasive action once the lathe ensnarled the hair.
The HR manager at Thompson Industries has been given the task of reducing the number of unsafe acts and creating a supportive environment. Which of the following would be LEAST effective? A) conducting an organizational safety review B) providing leadership training to managers C) stressing the importance of teamwork D) promoting the value of safety
A) conducting an organizational safety review
Which of the following is the supervisor's primary role in safety? A) conducting daily safety inspections of the workplace B) helping workers file claims for job-related injuries C) alerting top management to OSHA inspections D) setting health and safety standards for the firm
A) conducting daily safety inspections of the workplace
According to OSHA, employers must report occupational injuries that result in any of the following EXCEPT ________. A) first aid treatment B) loss of consciousness C) restriction of motion D) transfer to another job
A) first aid treatment
Which of the following accounts for one-third of all industrial accidents? A) forklifts and wheelbarrows B) woodworking machines C) pulleys and flywheels D) ladders and scaffolds
A) forklifts and wheelbarrows
Workplace security plans should address all the following EXCEPT ________. A) making security functions more informal B) protecting intellectual property C) installing facility security systems D) developing crisis management plans
A) making security functions more informal
The mail room at Citibank uses special scanners to check the safety of incoming mail. This is most likely an example of ________. A) mechanical security B) organizational security C) natural security D) architectural security
A) mechanical security
In most large facilities, who is responsible for reducing unsafe working conditions and reducing unsafe acts by employees? A) chief safety officer B) OSHA representative C) HR supervisor D) line manager
A) chief safety officer
Which of the following would be considered OSHA's lowest priority for inspection? A) conducting a follow-up inspection B) investigating an employee complaint C) investigating the occurrence of a fatality D) performing a high-hazard industry inspection
A) conducting a follow-up inspection
Data entry specialists and assembly line workers are most susceptible to ________. A) repetitive motion disorders B) workplace violence C) job stress D) burnout
A) repetitive motion disorders
Improperly guarded equipment, defective equipment, hazardous procedures, and improper ventilation are all examples of ________. A) chance occurrences B) unsafe conditions C) unsafe employee behavior D) normal occupational hazards
B) unsafe conditions
Which of the following would most likely NOT be considered a reportable injury according to OSHA? A) Mike breaks his arm while playing in a softball game during a mandatory company picnic. B) John sprains his ankle after becoming tangled in his car's seat belt in the company parking lot. C) Leah breaks her wrist after slipping in a puddle on a stairwell inside the company building. D) Tom injures his back during a traffic accident as he delivers lumber in a company truck.
B) John sprains his ankle after becoming tangled in his car's seat belt in the company parking lot.
In some cases, employees accused of alcoholism or drug abuse have retaliated by suing the employer for all of the following EXCEPT ________. A) wrongful discharge B) OSHA violations C) illegal search D) defamation
B) OSHA violations
________ relates to protecting employees from internal and external security risks. A) Risk management B) Security C) Crisis D) Safety
B) Security
What is the primary cause of workplace accidents? A) chance occurrences B) unsafe conditions C) unsafe employee behavior D) insufficient safety training
B) unsafe conditions
Thermo is a plastic supply and custom fabrication company. Thermo serves clients in the medical, solar, and semiconductor industries by making acrylic and polycarbonate sheets, tubes, and rods. The company employs approximately 500 workers at its facility in Ohio. Safety is a top priority at Thermo, and supervisors are required to conduct daily inspections of all equipment. Recently, three workers were seriously injured by a large press used to mold plastic parts. The workers spent time in the hospital for hand injuries, and they are currently recuperating at home. As a result, top management is evaluating all aspects of safety at the facility to determine what changes need to be made. Which of the following, if true, best supports the argument that Thermo needs to implement a positive reinforcement program? A) Each of the injured workers was given a job simulation test prior to selection and placement. B) The injured workers removed a safety guard while operating the press to speed the process. C) The accident reporting rate at Thermo is lower than that of comparable businesses in the area. D) One of the injured workers was on probation with Thermo for starting a fight with a coworker.
B) The injured workers removed a safety guard while operating the press to speed the process.
Thermo is a plastic supply and custom fabrication company. Thermo serves clients in the medical, solar, and semiconductor industries by making acrylic and polycarbonate sheets, tubes, and rods. The company employs approximately 500 workers at its facility in Ohio. Safety is a top priority at Thermo, and supervisors are required to conduct daily inspections of all equipment. Recently, three workers were seriously injured by a large press used to mold plastic parts. The workers spent time in the hospital for hand injuries, and they are currently recuperating at home. As a result, top management is evaluating all aspects of safety at the facility to determine what changes need to be made. Which of the following, if true, best supports the argument that Thermo supervisors need additional training in OSHA standards? A) The three workers were working overtime during an evening shift at Thermo, and only one of them had extensive experience using the press. B) The safety gate had been removed from the press to bypass a safety interlock, and the gate was not replaced prior to the three workers using the machine during their morning shift at Thermo. C) Thermo conducts air sampling on a weekly basis as part of its industrial hygiene program, and the firm has never been cited for poor air quality. D) All three of the injured workers had worked at Thermo for over thirty years and were nearing retirement age prior to the accident.
B) The safety gate had been removed from the press to bypass a safety interlock, and the gate was not replaced prior to the three workers using the machine during their morning shift at Thermo.
All of the following recommendations are suggested for companies seeking to minimize the entry or spread of infectious diseases EXCEPT ________. A) staggering lunch breaks B) administering drug tests frequently C) making hand sanitizers easily available D) cleaning work areas regularly and often
B) administering drug tests frequently
The Occupational Safety and Health Act was intended to ________. A) set national, state, and local safety and health standards B) assure every person safe and healthful working conditions C) provide safe and healthful working conditions to self-employed persons D) prevent the occurrence of occupational illnesses among public employees
B) assure every person safe and healthful working conditions
A safety program that identifies employee conduct that contributes to accidents and then trains workers to avoid such conduct is known as a(n) ________ program. A) strategic safety B) behavior-based safety C) positive reinforcement safety D) employee participation-based safety
B) behavior-based safety
All of the following are most likely signs of employee depression EXCEPT ________. A) lack of sleep B) burnout C) poor concentration D) reduced appetite
B) burnout
David is experiencing significant levels of job stress in his position as vice president of marketing. Which of the following is LEAST likely to be a consequence of David's stress? A) headaches B) cancer C) depression D) heart disease
B) cancer
If your employees are traveling to and from international destinations, which of the following is the most appropriate option for preventing the entry or spread of an infectious disease? A) dismissing the workers from their positions B) denying workers facility access for ten days C) sending workers to a nearby hospital D) offering workers a light-work option
B) denying workers facility access for ten days
According to the Occupational Safety and Health Act, employers are responsible for ________. A) transferring workers who are cited for OSHA violations B) examining workplace conditions for OSHA compliance C) scheduling annual consultations with OSHA representatives D) replacing old equipment on an annual basis to comply with OSHA
B) examining workplace conditions for OSHA compliance
Supervisors can reduce unsafe acts in all of the following ways EXCEPT by ________. A) listening to employee suggestions B) identifying employee interests and preferences C) involving workers in planning safety programs D) providing workers with comfortable protective equipment
B) identifying employee interests and preferences
According to OSHA, which of the following would most likely be considered the highest priority? A) investigating the occurrence of a fatality B) inspecting a site where there may be imminent danger C) conducting random inspections and follow-up inspections D) conducting a special-emphasis inspection aimed at a high-hazard industry
B) inspecting a site where there may be imminent danger
Which term refers to systematically identifying and eliminating workplace dangers by focusing on the relationship between the worker, the task, the tools, and the work environment? A) occupational safety program B) job hazard analysis C) operational safety review D) risk management
B) job hazard analysis
All of the following are considered vulnerable workers EXCEPT ________. A) young workers B) male workers C) immigrant workers D) aging workers
B) male workers
Employees who wish to lower their job stress will most likely benefit from doing all of the following activities EXCEPT ________. A) making a list of problems and possible solutions B) putting off dealing with distasteful problems C) requesting realistic project deadlines D) limiting interruptions
B) putting off dealing with distasteful problems
Lisa, a supervisor at a manufacturing facility, suspects that one of her subordinates may be under the influence of drugs or alcohol. Which of the following actions should Lisa take? A) Lisa should contact the worker's spouse for advice. B) Lisa should contact the police and a security guard. C) Lisa should observe the worker for signs of impairment. D) Lisa should ignore the matter because it is a personal issue.
C) Lisa should observe the worker for signs of impairment.
According to research, which of the following is an increasing cause of motor vehicle crashes that contribute to 24% of motor vehicle crashes per year? A) alcohol abuse B) hazardous roads C) cell phone usage D) improper driver training
C) cell phone usage
All of the following personality traits are associated with people who file vehicular insurance claims EXCEPT ________. A) impatience B) entitlement C) clumsiness D) aggressiveness
C) clumsiness
OSHA standards on respiratory protection require that employees ________. A) recognize and repair faulty respiratory equipment B) receive eight hours of training in respiratory safety standards C) demonstrate how to inspect, put on, and remove respirator seals D) pass a written exam on safety inspections of respiratory equipment
C) demonstrate how to inspect, put on, and remove respirator seals
Which of the following will most likely increase as a result of employees experiencing significant job stress? A) retirements B) punctuality C) health care costs D) work quality
C) health care costs
Which of the following terms refers to taking advantage of a facility's architectural features in order to minimize security problems? A) mechanical security B) organizational security C) natural security D) risk management
C) natural security
What term is used to describe any abnormal condition or disorder caused by exposure to environmental factors associated with employment? A) on-the-job accident B) chronic condition C) occupational illness D) work-related disease
C) occupational illness
When an agency checks to see if units under their jurisdiction are following safety laws and rules, that is known as a(n): A) job hazard analysis B) citation C) operational safety review D) safety awareness program
C) operational safety review
The security guards and tellers at National Bank receive extensive training on how to handle medical emergencies, angry customers, and suspicious packages. Which of the following security programs is most likely being used at National Bank? A) mechanical security B) group security C) organizational security D) natural security
C) organizational security
All of the following are effective ways that employers reduce workers' compensation costs EXCEPT ________. A) enforcing safety policies B) communicating safety policies C) providing classroom training D) using appropriate safety equipment
C) providing classroom training
Which of the following should be the first method used to reduce workplace accidents? A) enforcing job rotation B) screening job applicants C) removing physical hazards D) requiring employees to use PPE
C) removing physical hazards
What steps can employers take to prevent the entry or spread of infectious diseases in the workplace?
Closely monitor Centers for Disease Control travel alerts. • Provide daily medical screenings for employees returning from infected areas. • Deny facility access for 10 days to employees or visitors returning from infected areas. • Tell employees to stay home if they have a fever or respiratory system symptoms. • Clean work areas and surfaces regularly. • Stagger breaks. Offer several lunch periods to reduce overcrowding. • Emphasize to employees the importance of frequent hand washing and sanitization.
) Centerline Communications wants to reduce the number of workplace accidents associated with employee substance abuse. Which of the following would be the most effective method to accomplish this goal? A) preemployment drug testing B) preemployment psychological screening C) a combination of random ongoing drug testing with psychological evaluations D) a combination of preemployment drug testing and random ongoing drug testing
D) a combination of preemployment drug testing and random ongoing drug testing
Which of the following is a major source of occupational respiratory disease? A) dust B) mold C) fertilizer D) asbestos
D) asbestos
Which of the following is LEAST likely to be considered when OSHA calculates a penalty? A) business size B) compliance history C) gravity of violation D) legal representation
D) legal representation
All of the following are covered by the Occupational Safety and Health Act EXCEPT ________. A) federal agents B) hospital nurses C) crane operators D) self-employed persons
D) self-employed persons
All of the following are effective methods of improving workplace safety EXCEPT ________. A) analyzing accident rates B) publicizing an organization's safety policy C) showing an organizational commitment to safety D) setting unreasonable but challenging safety goals
D) setting unreasonable but challenging safety goals
T/F An operational safety review involves systematically identifying and eliminating dangers in the workplace before accidents occur and reducing risks to acceptable levels.
False
T/F Despite many managerial warnings, William refuses to wear a hard hat when working as an electrician for Paulson Homes. William cuts his head when he falls from scaffolding that has not been properly secured. Paulson Homes will most likely not be held liable for William's injury.
False
T/F During the evaluation stage of industrial hygiene, a facility's health and safety officers interview employees and conduct a facility survey.
False
T/F Investigating employee complaints of alleged violation standards is considered the highest priority for OSHA.
False
T/F OSHA advocates safety incentive programs because they drastically reduce the number of workplace injuries and illnesses.
False
T/F OSHA's standards are vague, which has made them difficult to enforce.
False
What class of risk do employers have to manage? How do employers manage such risk?
How the employer manages a specific risk depends on the class of risk it falls in. For example, internal preventable risks arise from actions within the company and include things like employees' illegal conduct or workplace accidents. Employers manage these risks with methods such as codes of conduct, disciplinary procedures, and safety rules. Strategy risks are risks that managers accept as part of executing their strategies, such as the risk a banker takes that a borrower defaults. Employers manage some strategy risks with independent experts (like those who assess insurance risks) and with internal experts, like the risk managers who help to oversee banks' loan portfolios. External risks come from outside the company and include things like political and natural disasters and terrorism. Managing external risks might involve methods like scenario planning, in which the company endeavors to identify, analyze, and plan for multiple possible eventualities.
What are the factors leading to job stress? How can employees reduce their job stress?
Job stress can be caused by both external and personal factors. External factors include work schedule, work pace, job security, client interaction, and noise. Personal factors include things like personality and work-family conflict. The following suggestions may assist in reducing job stress. • Build good working relationships with colleagues. • Do not accept work overloads. • Build an effective relationship with one's supervisor. • Negotiate for realistic deadlines. • Learn about upcoming events and get lead time to prepare. • Find time each day to relax. • Take a walk. • Reduce unnecessary noise. • Reduce the amount of trivia in one's job. • Limit interruptions. • Deal with distasteful problems as soon as possible. • Make a constructive "worry" list with possible solutions for each problem.
When setting up a basic security program, what are the primary threat assessment matters that need to be addressed? Discuss the role of natural, mechanical, and organizational security in your security program.
Security programs ideally start with an analysis of the facility's current level of risk. As part of this initial threat assessment, also review at least these six matters. 1. Access to the reception area, including number of access points, and need for a "panic button" for contacting emergency personnel; 2. Interior security, including possible need for key cards, secure restrooms, and better identification of exits; 3. Authorities' involvement, in particular emergency procedures developed with local law enforcement authorities; 4. Mail handling, including how employees screen and open mail and where it enters the building; 5. Evacuation, including a full review of evacuation procedures and training; and 6. Backup systems, for instance, that let the company store data off site if disaster strikes. Having assessed the potential current level of risk, the employer then turns its attention to assessing and improving natural, mechanical, and organizational security. Natural security means taking advantage of the facility's natural or architectural features in order to minimize security problems. Mechanical security is the utilization of security systems such as locks, intrusion alarms, access control systems, and surveillance systems to reduce the need for continuous human surveillance. Finally, organizational security means using good management to improve security. For example, it means properly training and motivating security staff and lobby attendants.
In a brief essay, discuss the observable behaviors that may indicate an employee has an alcohol-related problem. Identify and describe the behavior associated with each stage of alcoholism.
Stage 1, the early stage, is characterized by tardiness, leaving work early, missed deadlines, errors, and poor job efficiency. Stage 2, the middle stage, is characterized by frequent days off with vague reasons, changes in behavior, avoidance of others, anxiety, and injuries at work. Stage 3, the advanced stage, is characterized by personal neglect, unsteady gait, violent outbursts, blackouts, frequent accidents, and incompetent performance.
What is OSHA and how does it help protect workers?
The Occupational Safety and Health Administration (OSHA) was created to protect workers and minimize workplace accidents. OSHA's basic purpose is to administer the Occupational Safety and Health Act of 1970 and to set and enforce the safety and health standards that apply to almost all workers in the United States. The Department of Labor enforces the standards, and OSHA has inspectors working out of branch offices to ensure compliance. Under OSHA, employers with 11 or more employees must maintain records of and report certain occupational injuries and occupational illnesses.
What is the supervisor's role in workplace safety? What actions can supervisors take to reduce the number of unsafe acts by subordinates?
The supervisor is responsible for the day-to-day inspections. Safety inspections should always be part of the supervisor's daily routine. In order to reduce unsafe acts by subordinates, supervisors can take additional actions. Some possible actions include 1) emphasizing the commitment of top management to safety, 2) establishing a safety policy, 3) reducing unsafe acts through selection, 4) providing safety training, 5) using posters, 6) using positive reinforcement, 7) using behavior-based safety programs, 8) encouraging worker participation, and 9) conducting safety and health inspections regularly.
What steps are involved in a basic industrial hygiene program?
The process is basically one of recognition, evaluation, and control. First, the facility's health and safety officers must recognize possible exposure hazards. Doing so typically involves conducting plant/facility walk-around surveys, employee interviews, records reviews, and reviews of government and nongovernmental standards regarding various occupational exposure hazards. Then, the evaluation phase involves determining how severe the hazard is. This usually requires measuring the exposure, comparing the measured exposure to some benchmark and determining whether the risk is acceptable. Finally, the control phase involves taking steps to eliminate or reduce the hazard so that it no longer ranks as dangerous.
Enterprise risk management involves identifying and handling security risks, such as those associated with workplace crime and facility security.
True
T/F OSHA insists that occupational injuries be recorded, including ankle sprains that occur during voluntary participation in a company softball game.
True
T/F People who are impulsive and highly extroverted tend to be accident prone.
True