marking

radioactive mark

I'm work authorized by the US nuclear Regulatory Commission that must appear on all packages that contain radioactive materials

Marine pollutant marking

Marine pollutant means a material listed in appendix B to section 172.101 or a mixture of 10% concentration, 1% of a severe Marine pollutant. If non-bulk packages are transported by vessel with the Marine pollutant material than the package must be marked with the Marine pollutant marking

when more than 5 different class 1 explosive materials are packed in the same package

May Mark the packaging with only five of the X numbers, National Stock numbers, or product codes, or with a combination of each of these

marking requirements for vehicles transporting non-bulk packages

Motor Vehicles are freight containers containing a single hazardous material known both packages must be marked on each side and eats in with identification number for the hazardous material. this applies when each package is marked with the same ID number, gross weight is 4000 kg or more, all material is loaded at that one facility, no other hazardous material is offered

hazardous substances and non-bulk packages must be marked with

RQ with the proper shipping name or if it is a hazardous waste the waste go may be used to identify the hazardous substance

Salvage drums and cylinders along with the proper shipping name must be marked

Salvage and letters at least 12 millimeters or .25 in high

white square on point mark

a Mark that is white with black writing and shaped like a square standing on one corner. The Mark is used on bulk containers and containers of hazardous materials identification number

orientation arrows

a pair of arrows indicating the direction in which the top of a package should be pointing on use these Arrow should be used in two opposing sides

placard

a square on end that can contain a hazardous materials identification number. May also display the materials hazard class number in a visual representation of the associated mark.

fumigated units must have the fumigate Mark when

always, displayed prominently for anyone attempting to enter

petroleum sour crude oil with hydrogen sulfide sufficient to be an inhalation Hazard must

atoxic Mark, skull and crossbones

how must other regulated material be marked

be so marked following or below the proper shipping name orm-d

bulk packaging containing regulated medical waste must be marked with a

biohazard Mark. The mark must be on two opposing sides or two ends other than the bottom if the package has a capacity of less than 1000 gallons. Packaging's with capacity of 1000 gallons or more must have markings at each end and each side. If the biohazard mark on the bulk packaging is not visible you must Mark to transport a vehicle or Freight container bearing such packaging's in each side and each end

173 subpart D allows Shipman exceptions, no proper shipping name, for limited quantities of hazardous materials other than class

class 1 or 7. Must be marked with the UN or na identification number in a square on point border

identification numbers for bulk packages

dimensions, marked on each side on each end, and also marked on two opposing sides

all marks must be

durable, in English, printed or fixed on the surface. Displayed in a sharply contrasting color. Unobscured by other label or attachment. Located away from the other markings that might reduce effectiveness.

special marking requirements for 49 CFR 172.310 requirements for radioactive materials

gross Mass if package exceeds 50kg, authorized packaging design requirement, international vehicle registration code, radiation trefoil, USA for export

marking the exterior of a Hazmat package

if a package of hazardous material is separated from its documentation in the information marked on the container must be adequate to help emergency response Personnel to mitigate the effects of an accidental release in transit

when should elevated temperature materials that have the word hot

if liquid exceeding 212° Fahrenheit or solid exceeding 464 degrees Fahrenheit

orange panel

in Orange rectangular panel used to identify hazardous materials transported in bulk container. Containers of hazardous materials identification number.

Marine pollutant marking

indicates a material that should be kept away from heat to prevent chemical reaction to a release of the hazardous material

fumigant marking

indicates the container is undergoing fumigation

bulk Packaging

is the carriage and materials in very large quantities. In most cases the objects containing a material being transported composes the largest part of the vehicle.

Air transport of division 4.1 self reactive substances or division 5.2 organic peroxides must bear the

keep away from heat mark

Marine pollutant must be

marked on two sides if less than 1000 gallons call my mark on four sides if 1000 gallons or more

division 6.1 poisons and non-bulk plastic single or composite packages must be

marked poison at least .25 in hi Within 6in of the opening

containers with odorized LPG must be marked

no notarized or not odorized

if package marks are not visible in overpeck must be marked

overpacking letters at least 12 mm or .25 in high

Marine pollutant marking

package contains Marine

identification numbers for marking requirements for bulk packages must be displayed on

plain white square on point placard. Across the center of the primary Hazard placard. On and orange panel

General marking requirements for each number package under-17 2.301

proper shipping name as it appears in the HMT, identification number found in column 4 of HMT, technical name needed if G is in the column 1 of HMT except for on the vision 6.2 materials, name and address of the consigny, Department of Transportation special permit, column seven inhalation hazards must be marked inhalation hazard, orientation arrows must be marked on combination packages if the inner package contains liquid hazardous material

all class 1 explosive packages must be marked

the explosive number for that substance are clear device

biohazard Mark indicate

the presence of an infectious substance, specifically regulated medical waste

The technical name

the technical name of the chemical must be marked in parentheses along with the basic description. If it consists of two or more materials at least two technical names that predominately contribute to the shipping name must be marked

keep away from heat marking

to prevent chemical reactions or release of hazardous material

4 General marking requirements for bulk packaging the proper shipping name needs to be marked on

two opposite sides of a portable tank, each side and each end of a cargo tank, each side of tank cars holding 49 CFR 172.600 a 1 Roman numeral 2

non bulk Packaging

typically smaller packages kept in storage area with similar packages.

hotmarking

used to identify materials transported at a elevated temperature

identification number

used to identify the hazards of a specific hazardous material. Found in column for the hazardous materials table. When none book hazardous material packages to ship the item number is used in conjunction with the proper shipping name. Both packages use only ID number for identification purposes

orm-d mark

you said you're my packages with other regulated materials