OSHA Welding and Cutting
Moving all flammables and combustibles away from the welding area is ____________.
An example of effective fire prevention
Gas welding cylinders should be stored and secured in
An upright position Position where oxygen cylinders are separated from fuel gas cylinder
Vapors of these solvents are a concern in welding and cutting because the heat and ultraviolet radiation from the arc will decompose the vapors and form highly toxic and irritating phosgene gas.
Chlorinated hydrocarbons
Heat from an electric arc, a steam of ionized gas called plasma, or burning gases to trim metal objects to specific dimensions
Metal cutting
Cylinders may be used as rollers or supports when?
Never
Arc Welding cables in need of repair must _________.
Not be used and effectively repaired by a qualified person or effectively disposed of.
Permissible exposure levels are established by _______ for many compounds to minimize or prevent adverse health exposures.
Occupational Safety and Health Administration (OSHA)
Activity which depends on the heat produced by the combustion of a fuel gas in the presence of oxygen.
Oxygen and fuel gas welding
Welders helmets and respirators are examples of what type of controls?
Personal Protective Equipment
Whenever practicable, all arc welding and cutting operations shall be shielded by noncombustible or flameproof screen which will _____________.
Protect workers from the direct rays of the arc.
Fumes and gases enter the body through the _________ and effect the lungs directly or are transported by blood and the lymph system to other parts of the body.
Respiratory system
When a structure or pipeline is employed as a ground return circuit, it must be determined that _______________.
The required electrical contact exist at all joist
In arc welding the arc which produces the heat to melt metal produces intense light. This light can be a combination of three forms of non-ionizing radiation known as?
Ultraviolet light, Infrared light, Visible light
In the arc welding process, eye exposure to intense visible light is prevented for the most part by the __________.
Welder's Helmet
OSHA requires that welders work in safely _______ to avoid the danger from inhalation of gases and particulates that can result from welding processes.
Well ventilated areas
Metal fume fever is principally associated with what chemical substance generated when welding.
Zinc
It is important before welding and hot work to remove coating along the line of the weld such as ______________ to prevent the release of toxins.
Al of the above
An important feature of a hot work permit includes which of the following?
All of the above
Dos and don'ts of gas welding and cutting include which of the following?
All of the above
In addition to fumes, welding produces a number of gasses to include which of the following?
All of the above
It is important before welding and hot work to remove coatings along the line of the weld such as ___________ to prevent the release of toxins.
All of the above
What kind of testing is required before entry into a confined space?
All of the above
You must never weld, cut or preform hot work when?
All of the above
Process in which metals are fused together by heating them with electricity that is generated between an electrode and the surface of the base metal.
Arc welding
The most common and simplest type of welding today is _________.
Arc welding
Before a regulator is removed from a cylinder valve, the cylinder valve must always ____________.
Be closed and the gas released from the regulator
Administrative/work practices controls include which of the following?
Both A and B
Controlling exposure to the safety and health hazards encountered in welding operations include engineering controls (e.g. ventilation), _______________ and _________________.
Both A and B
The type of weld used is normally determined by ________
Both A and B
An investigating tool used to characterize the nature and extent of contaminants in air and to determine whether contaminant sources affect a workers air quality.
Both B and C
Ultraviolet radiation (UV) is generated by the _________ in the welding process.
Electric Arc
Hot electrode holders must not be dipped in water by the welder or cutter because doing so may expose the worker to _______________.
Electric shock
Found in the coatings of several types of fluxes used in welding.
Flourides
Fuel gas and oxygen hoses must be:
easily distinguishable from each other