Soild Professors IED
Which of the following is NOT a selection required when making a Joint Origin between two faces?
Line of symmetry
Which of the following is NOT a Joint Type?
Linear
Why would you want to ground a component before applying Joints?
So that the other components can move relative to it
Which of the following is a selection required by the New Contact Set Command?
Bodies or Components
Which of the following is NOT an option in the Thread command window?
Diameter
True or False: Joint Limits can only be applied to Cylindrical, Revolute, and Ball Joints
False
What is the main difference between the Fillet and Chamfer commands?
Fillets create round edges while Chamfers create angled faces
True or False:When creating a Joint, the order in which you select joint origins determines which components move to snap into place.
True
True or false: When creating a new component, activating it allows any actions, commands, sketches, or 3D geometry to be contained within the component.
True
How can you identify a driven dimension?
A driven dimension has parenthesis around its value
The Point at Edge and Plane Command requires:
A plane or face to be selected along with a linear edge or sketch line
What is Design Intent?
A strategy where geometry is designed in such a way where changes produce desired predictable results
To change how balloon annotations are displayed, the user must:
Access the entire sheet`s Annotation Settings in the bottom toolbar
Which of the following views can be used as a Parent View when creating "Projected Views" in a drawing?
All of these
Drafts can be created in which of the following directions?
All of these are correct
Which of the following is a type of Construction Axis command?
All of these are correct
. A sketch is fully defined if:
All sketch identities are colored black
What is the Capture Position tool used for?
Captures the Position of all components relative to each other
Which of the following is NOT a Construction Point command?
Cylindrical Point
T or F Drafts can only be applied to a 3D model when performing an extrude.
F
True or False 3D bodies can never be associated using Joints.
False
Which of the following is NOT a Hole Type found in the Hole command window?
Flat-Head
Which of the following Icons is used to activate the As-built Join
Image of Two grey connected parts
When the "Keep Tools" option is checked, the Combine command will
Keep the original Tool Bodies after completing the command
Which of the following makes applying Joints to two components easier?
Positioning the components close to each other and orienting them correctly
Once the model is completed and the drawing sheet is created, which of the following approaches could NOT be used to add views of the model to the sheet?
Reference an already existing 2D view in the drawing canvas and use the "Exploded View" command to create an exploded view of the drawing
How would you use the Shell command to hollow out a body without removing any faces?
Select the entire body for the Faces/Body section of the Shell command
Joint Limits are used to
Specify a specific range of motion for the components
What is NOT a type of Construction Plane?
Symmetric Plane
T or F In Fusion 360, you must create an Exploded View of the design in the Model workspace before you can add it to a drawing.
T
T or F In a drawing, the scale of the Detail View will not update if the scale of the Parent View is changed.
T
T or F The Shell command can remove material from multiple faces in the model.
T
T or F Threads can only be added to cylindrical faces.
T
T or F Unlike bodies, Sketches must be selected from the browser in order to apply the Scale command to them.
T
What icon in the browser signifies a component is in "read only" mode?
The Link Icon
Which of the following can NOT be used to activate the Sketch Dimension command?
The S key on the keyboard
T or F
The sheet size of any drawing can be changed after the drawing is created.
If a sketch is fully defined:
The sketch will produce 100% predictable results
T or F When creating a Section View, no matter which direction the cursor moves, the created view will always stay aligned with the Parent View.
True
True or False After placing the Joint Origin, a set of control arrows appears, allowing the user to adjust the location of the Joint Origin.
True
True or False Joints can only be added to components.
True
True or False The move dialog box appears as soon as components are inserted into the design
True
True or False The orientation of the Joint Origin is controlled by the input geometry which can be a Face, Edge, or Point.
True
True or False: Applying a combination of Joint Commands can accomplish the same result as Rigid Groups.
True
True or False: Contact Sets can be applied to components in a design so that they only move when they come into contact with each other.
True
Which of the following is not a Boolean operation found within the Combine command?
Unite
Which of the following is NOT an option in the Thread command window?
Variable circumference
Which of the following is true in regards to Rigid Joints?
Which of the following is true in regards to Rigid Joints?