AutoCAD 1

Ace your homework & exams now with Quizwiz!

The place/window where you can change a layers color, linetype and status. A) Layer properties manager B) Layer manager C)Layer status manager

A) Layer properties manager

This key allows you to quickly repeat your last command. A) Space bar B) Ctrl C)Esc D) Tab

A) Space bar

Are the front and top views are aligned vertically or horizontally? A) Vertically B) Horizontally

A) Vertically

Which coordinate system is stationary and cannot be translated or rotated? A) WCS B) CCS C) LCS D) UCS

A) WCS

Object snaps not only speed up the drawing process, you cannot draw ___________ without them unless you enter coordinates. A) accurately B) neatly C) efficiently D) with the mouse

A) accurately

A grouping of objects that may be reused. A) block B) group C) nest D) pair

A) block

A polygon that is drawn on the outside of a circle is said to be ... A) circumscribed B) outward C) inward D) inscribed

A) circumscribed

A surface of the part that touches the datum plane is called a ... A) datum feature B) simulated datum C) datum D) baseline

A) datum feature

What is this symbol? /-> A) depth B) countersink C) symmetry D) counterborex

A) depth

Datum dimensioning is preferred over continuous dimensions because it reduces ... A) error build up B) dimensioning time C) calculation time D) set up time

A) error build up

Which printing option prints everything that has been drawn? A) extents B) display C) window D) scale to fit

A) extents

What unit of measure is most commonly used on an English drawing? A) inches B) mm C) cm D) meters

A) inches

the command used to make a line longer by a prescribed length. A) lengthen B) extend C) stretch D) grow

A) lengthen

What is the scale basepoint used in the example shown? (Rectangle) A) lower left corner B) rectangle center C) upper right corner D) upper left corner

A) lower left corner

The typed command that is used to control the length of the dashes and spaces of the different line types. A) ltscale B dashscale C) setscale D) scale

A) ltscale

What unit of measure is most commonly used on a metric drawing? A) mm B) decimal inches C) feet D) inches

A) mm

What pen styles table is used if you want to print in black and white? A) monochrome B) grayscale C) black and white D) color

A) monochrome

When AutoCAD is waiting for you to select an object, the crosshairs turn into a .... A) pickbox B) lasso C) hand D) arrow

A) pickbox

to change the line type scale of an individual object, you must enter the .... window. A) properties B) page setup C) line type D) scale

A) properties

Clicking and dragging the mouse from left to right produces a .... A) standard window / window selection B) crossing window C) polygon window D) fence

A) standard window / window selection

What key do you press to cycle through the dynamic input dimensions? A) tab B) esc C) ctrl D) shift

A) tab

The typed command that allows you to create a new viewport. A) viewports/mview B) port C) newview D) newport

A) viewports/mview

What typed command is used to write a block to a file? A) wblock B) insert C) block D) create

A) wblock

An arc may be defined by its START, END and .... A)...radius, direction, angle B)...3rd point, end, direction C)...length, end, direction D)...end, angle, lenght

A)...radius, direction, angle

The view that generally contains the least number of hidden lines. A) Top B) Front C) Right side D) Back view

B) Front

Are the front and right side views are aligned vertically or horizontally? A) Vertically B) Horizontally

B) Horizontally

A relative coordinate is measured relative to the .... A) Bottom left corner of your paper B) Last point entered C)Cursor D) Origin

B) Last point entered

The window and tab that you need to access in order to change the drawing area's color? A) Options-Selection B) Options-Display C)Options-Drafting D) Options-Files

B) Options-Display

A circle may be defined by its CENTER and .... A) diameter and three points B) Radius and diameter C) radius and circumference D) three points and circumference

B) Radius and diameter

The command that is used to select your unit of measure and precision. A) Limits B) Units C) Measure D) Precision

B) Units

What is this symbol? (look like big check mark) A) counterbore B) countersink C) depth D) symmetry

B) countersink

Which printing option prints everything that you can currently see? A) extents B) display C) limits D) window

B) display

The command used to break a block (or rectangle) up into its individual components A) insert B) explode C) break apart D) ungroup

B) explode

The space where you see exactly what is going to be printed. A) model B) layout C) model tab D) model view

B) layout

A reference dimension is given within .... A) brackets B) parentheses C) double quotes D) single quotes

B) parentheses

Object Snap: indicates four points in a circle A) endpoint B) quadrant C) nearest D) tangent

B) quadrant

What key do you need to hold down if you want to remove an object(s) from the current selection set? A) esc B) shift C) tab D) ctrl

B) shift

in the United States is first or third angle projection used as the standard? A) first B) third

B) third

Dimension and extension lines are thin so that they will not be mistaken for .... lines. A) center B) visible C) hidden D) section

B) visible

How many zeros to the right of the decimal does two thousandths of an inch have? A) .0002 B) .020 C) .002 D) .00002

C) .002

An orthographic projection is a ____ representation of an object? A) pictorial B) isometric C) 2D D) 3D

C) 2D

A place that gives you quick access to commands that are frequently turned on and off. A) Tool palettes B)Status bar C) Command window D) Ribbon panels

C) Command window

An absolute coordinate is measured relative to the .... A) Cursor B) Bottom left corner of your paper C) Origin D) Last point entered

C) Origin

The standard views used in an orthographic projection are __________ . A) Front, Left and Back views B) Right side, Left side and Back views C) Top, Front, and Right side views D) Top, Back, and Right side views

C) Top, Front, and Right side views

X is the symbol used for repeated features. What else is this symbol used for? A) concentricity B) symmetry C) chamfer D) counterbore

C) chamfer

What is the rotation basepoint used in the example shown? (A circle) A) top quadrant B) bottom quadrant C) circle center D) right quadrant

C) circle center

What layer property controls an entity's printed width? A) line type B) layer name C) color D) pen style

C) color

Leader lines should not be ... A) straight B) thin lines C) curved, horizontal or vertical D) placed in between 30 and 60 degrees

C) curved, horizontal or vertical

The typed command used to edit existing text. A) tedit B) edit C) ddedit or double click on text D) text edit

C) ddedit or double click on text

Is a complete circle such as a hole dimensioned by its... A) circumference B) leader C) diameter D) radius

C) diameter

How do you access model space while still remaining in paper space? A) click on the viewport border B) click on the model tab C) double click within the viewport border D) Type "model"

C) double click within the viewport border

Clicking once on an object, while not currently in a command, access the .... A) properties window B) the command used to create the object C) grip boxes D) modify commands

C) grip boxes

You know when an object is selected because it becomes .... A) blinks B) bigger C) highlighted D) invisible

C) highlighted

The construction layer is used to create projection lines. When the orthographic projection is complete, we do not need these lines anymore. The easiest way to not show the projection lines is to turn the construction layer to the ______ state. A) freeze B) thaw C) off D) on

C) off

Which is the window and tab where you can access the Autosnap Marker size A) options-files B) options-display C) options-drafting D) options-selection

C) options-drafting

You may access the object snap settings by right clicking on the Object Snap icon in the status bar, clicking on the arrow next to the icon, or by typing what command? A) snapset B) snap C) osnap D) object

C) osnap

This enables you to snap along angled track lines. A) temporary tracking B) dynamic input C) polar tracking D) object snap tracking

C) polar tracking

After selecting several objects to erase, what command would you type if you wanted to remove an object(s) from the selection set? A) eliminate B) delete C) remove D) add

C) remove

the grip box options may be accessed by _____________ on one of the boxes. A) dragging B) double clicking C) right clicking D) left clicking

C) right clicking

Which printing option will expand/reduce your drawing to fit the paper? A) extents B) window C) scale to fit D) display

C) scale to fit

What is the typed command used to access text settings? A) textsettings B) edit C) style D) font

C) style

To indicate line importance we draw lines using different line .... A) symbols B) line type scales C) thicknesses D) line types

C) thicknesses

An area within layout space that allows you to view objects within model space and to scale these objects with respect to the printed page. A) paper space B) model tab C) viewport D) model view

C) viewport

The thickest line type on a non-sectioned orthographic projection. A) center line B) hidden C) visible D) dimension

C) visible

A relative coordinate is indicated by placing the following symbol before your coordinate A) # B) < C) & D) @

D) @

Which coordinate system may be translated and rotated by the user to make drawing easier? A) LCS B) CCS C) WCS D) UCS

D) UCS

Clicking, and dragging the mouse from right to left produces a .... A) fence B) standard window C) polygon window D) crossing window

D) crossing window

What type of selection window selects everything touching and inside the defined window? A) polygon window B) lasso window C) standard window D) crossing window

D) crossing window

the layer you are drawing on is said to be .... A) on B) first C) on top D) current

D) current

Clicking, holding and dragging the mouse produces a .... A) crossing window B) fence C standard window D) lasso window

D) lasso window

This icon, located in the status bar, allows you to create tracking lines off of object snap points. A) polar tracking B) temporary tracking C) dynamic input D) object snap tracking

D) object snap tracking

When moving an object using relative coordinates, the first base point may be .... A) WCS, any point B) origin, UCS C) origin, WCS D) origin, point on object, any point

D) origin, point on object, any point

What typed command allows you to change the polar tracking angle. A) anglepo B) setangle C) pangle D) polarang

D) polarang

What is this symbol? (short line on top of long line on top of short line) A) countersink B) conterbore C) depth D) symmetry

D) symmetry

The object snap that will not show where the first point of a line is located until the second point is selected. A) endpoint B) quadrant C) nearest D) tangent

D) tangent

What letters do you type to indicate that you want to create a temporary track point. A) tm B) pt C) tp D) tt

D) tt


Related study sets

Micro Exam 3: Examples of Symbiosis Biofilms and Microbiome

View Set

Honors US History Chapter 23 Study Guide

View Set

SCIPAD: Types of monohybrid inheritance

View Set

Incorrect NCLEX Questions Part 2

View Set

The Challenges of Starting a Business (Chap. 5)

View Set