B.3.2 FC0-U61 Domain 2: Infrastructure

Ace your homework & exams now with Quizwiz!

Which type of cable would be used to transfer audio signals using light?

Fiber optic cables are used to transfer data using light.

Which of the following CPU types does Nvidia's Tegra fall under?

Nvidia's Tegra CPU is an example of an ARM CPU.

Which type of connector is commonly used for keyboards and mice?

USB, or Universal Serial Bus, is used for mice, keyboards, flash drives, and many other common peripherals.

Which type of port is used on an NIC to connect a computer to the network with unshielded twisted-pair cables?

Unshielded twisted-pair (UDP) network cables use an RJ-45 connector that plugs into the NIC and connecting network ports.

Which display connection type uses a 15-pin connector?

VGA is a legacy analog interface that uses a 15-pin connector. The connector is typically blue and has three rows of pins.

Which of the following devices is typically installed in the chassis above the screen in a laptop?

Webcams are most commonly installed in the chassis above the screen in a laptop.

Multiple computers configured to be able to communicate and share information with each other form a ____________.

Whenever two or more computers are configured to share information with each other, they're called a network.

How much power can a USB 3.0 dedicated charging port supply?

A USB 3.0 dedicated charging port can provide up to 7.5W of power to a single device. A dedicated charging port does not allow for any data transfer.

How many pins does an unpowered Firewire connector have?

A unpowered Firewire connector has four pins.

Which of the following are characteristics of Bluetooth? (Select two.)

Bluetooth is a wireless networking standard that uses 2.4 GHz radio waves. These are the same type of radio waves used with 802.11 wireless networking, so radio transmission can go through walls (not limited to line-of-sight connections). Bluetooth uses ad hoc connections between devices. Infrared uses red spectrum light waves and is limited to line-of-sight transmissions.

Bob is configuring a new inventory tracking system that uses special labels to mark each inventory item. To track the inventory, Bob must be within 25 meters of the label and use a special reader to retrieve the information that's embedded in the tag. Which of the following device interfaces is MOST likely being used?

Bob is using a passive unpowered RFID in this scenario. A passive RFID tag only responds when scanned at close range (approximately 25 meters).

Which of the following BEST describes the difference between Bluetooth and Wi-Fi?

Both Bluetooth and Wi-Fi are technologies that provide wireless communication. Though they have some similarities, their main purpose differs greatly. Bluetooth is designed to communicates between devices; Wi-Fi is designed to connect devices to the Internet.

You recently purchased a new sound card and installed it in a free PCI slot in your computer. You plug in your old speakers, but you don't get any sound. You have checked all cable connections, and they are secure. You have also ensured that the speaker volume is appropriately adjusted and isn't muted. Which of the following BEST describes the next step you should perform?

Check the vendor's website for an updated driver before further troubleshooting. Because the speakers worked before, you probably won't need to replace the speakers. PCI cards are plug-and-play, meaning that you should not need to manually configure resources such as IRQs. You should troubleshoot the problem completely before you resort to replacing the sound card.

What is the maximum working range of a Class 3 Bluetooth device?

Class 3 Bluetooth devices can work at a maximum range of 1 meter or 3 feet. Class 2 Bluetooth devices can work at a maximum range of 10 meters or 33 feet. Class 1 Bluetooth devices can work at a maximum range of 100 meters or 238 feet. Class 4 Bluetooth devices can work at a maximum range of 0.5 meters or 1.5 feet.

Which of the following tasks would benefit the MOST from a dedicated graphics card?

Computers that are used primarily for gaming, video editing, 3D modeling, and animation need a second GPU dedicated to graphics processing. The best dedicated graphics cards (sometimes called video cards) are expensive because they also include their own specialized RAM and cooling fan.

Which of the following display devices uses adjustable mirrors along with a light source and color filters to display the correct image?

Digital Light Processing (DLP) is a display technology often used in projectors. DLP devices use mirrors that can be adjusted with the light source and color filters to display the correct image.

Which of the following components converts AC to DC?

A computer's power supply converts alternating current (AC) from the wall outlet to direct current (DC) used by the computer's internal components.

Which of the following components stores values in short-term memory?

RAM stores values in short-term memory.

Which of the following colored jacks on an audio card would you connect a microphone to?

The pink audio jack is used to connect a microphone.

You have just built a brand new computer, and you need to purchase a monitor that will support widescreen 4K movies. Which of the following resolutions supports this need?

3840 x 2160 is the resolution that supports widescreen 4K movies.

Your client's computer keeps attempting to boot to the network adapter. You need to change it to boot to the hard drive that has the operating system installed on it. Where would you go to change the boot order?

A computer's boot order is configured in the BIOS/UEFI. In this scenario, the computer is set to boot from the network adapter instead of the hard drive.

You need a storage device that has very large storage capacity, is fast, and is relatively inexpensive. Which storage device will best suit your needs?

A hard disk has a large memory capacity, is fast, and is relatively inexpensive. Optical disks are also inexpensive but are not as fast and do not provide the storage capacity of hard disks. USB flash drives are not as inexpensive as hard disks with equal storage capacity and are not available with the capacity as the larger hard disks. Solid State Drives (SSD) have a large memory capacity and are fast but are much more expensive than comparable hard drives.

Which connector on the back of a computer is used to attach a mouse to a modern PC system?

A mouse is most commonly attached to a computer using a USB A connector. 6-pin mini-DIN connectors were used to attach a mouse in the past; however, mini-DIN connectors are not used today. The DB-15 connector with two rows is commonly used for joysticks. The DB-15 connector with three rows is used for connecting CRT monitors to the video card. The RJ-45 connector is used for Ethernet network connections. USB B connectors are commonly used for connecting printers and scanners.

You are in the process of purchasing several new Windows-based computers to replace broken or outdated computers. You have heard that solid state drives (SSDs) can significantly increase the overall performance of the system. Which of the following BEST describes the features of solid state drives (SSD) compared to hard disk drives (HDD)? (Select TWO).

A solid state drive is a flash device with a storage capacity similar to a small hard drive. Solid state drives are used as replacements for hard disk drives and store operating system, application, and data files. Solid state drives have several advantages. They: Are faster than hard drives. Have no moving parts. Have lower power consumption than hard drives (which is good for laptops). Are less susceptible to physical damage (from dropping) and immune to magnetic field damage. Are smaller and lighter than hard drives. The main disadvantage of solid state drives is cost--they are several times more expensive than comparable hard drives. However, their advantages make them a good choice in many situations, especially for portable devices.

Which kind of connector do you use to connect a modem to a standard telephone line?

A standard telephone line connector is an RJ-11. RJ-45 jacks are used for Ethernet twisted pair cables. Video cards and monitors with a built-in TV tuner have an F-type video connector. RG-58 is used for 10Base2 Ethernet networking (also called Thinnet).

Which of the following CPU models is made by AMD for high-end computer enthusiasts?

AMD's Ryzen Threadripper CPU models are manufactured by AMD for high-end computer enthusiasts.

Which connector is used with an unshielded twisted pair (UTP) cable?

An RJ-45 connector is used with an unshielded twisted pair (UTP) cable.

Which of the following are wired components that allow a computer to connect to an internal company network? (Select two.)

An RJ-45 network cable connects a computer to a wired network. A network interface provides an RJ-45 or fiber port into which a network cable (such as an RJ-45 cable) can be connected.

You have found a file named FunAppx86.exe on your hard drive. Which system(s) would this executable file MOST likely run on?

An executable file with "x86" in the name was most likely created for 32-bit systems. However, since 64-bit systems are typically backwards compatible with 32-bit applications, this file will most likely run on both 32-bit and 64-bit systems.

Which of the following is NOT an optical storage device?

CDs, DVDs, and Blu-ray discs are all examples of optical storage devices. Hard disks are magnetic storage devices.

Which network type uses a coaxial cable to receive its signal?

Cable connections require a cable modem to receive the signal from a coaxial cable and then convert it for use on a digital data network. This typically happens over copper Ethernet cables.

Which of the following is not an example of wireless networking communications?

DSL or Digital Subscriber Line, is not a form of wireless networking communications. Rather, it is a form of high-speed WAN connection used to connect remote systems to the Internet. Wireless communications are those types of networking technologies that do not rely upon wires or cables to connect computers together in a networking relationship. 802.11n is the primary wireless standard used. 802.11-compliant networks employ communication signals of 2.4GHz or 5.7 GHz radio waves. Infrared and Bluetooth are other forms of wireless networking communications.

Which graphics interface supports both digital and analog signals?

DVI-I is the graphics interface that supports both digital and analog signals.

As a member of the help desk administration team, you've been assigned to update the driver for the network adapter that is installed on most of the machines in your department. You have a copy of the latest driver on a USB flash drive. Which Windows utility will allow you to manually update this new driver?

Device Manager allows you to view installed devices and their status, update drivers, and disable or uninstall devices.

Which of the following devices normally provide a mini-USB (Universal Serial Bus) or micro-USB connector? (Select three.)

Devices such as digital cameras, tablets, and smartphones normally provide a mini or micro-USB connector.

Jeff has been asked to replace a monitor on a workstation. Which of the following device interfaces could he use to connect the new monitor?

Digital Visual Interface (DVI) connectors are designed to connect digital monitors to a computer.

Which of the following technologies allows data to be transferred between the RAM and CPU twice per cycle?

Double data rate (DDR) allows data to be transferred between the RAM and CPU twice per cycle.

Which of the following slots would a new graphics card MOST likely be inserted into?

Due to the high speeds and throughput needed by modern graphic cards, a PCIe slot would be used when installing a new graphic card.

Rick and Steve want to share information between their smart phones without connecting to the WiFi network. Which of the following is the least complicated way to accomplish this?

Enabling Bluetooth and sharing information on a smartphone is very quick and easy.

Which of the following is a wired networking method most commonly used today by desktop PCs and other network devices to connect to a local area network?

Ethernet is a wired, local area network (LAN) standard. Most laptops and desktop computers have built-in Ethernet network ports.

You are replacing your graphics card and have uninstalled the driver using the software package. You want to verify that the device is fully uninstalled. Which of the following would be the BEST place to verify the graphics card has been fully uninstalled?

Even after using the software package to uninstall a driver, the device may still be installed. You should always go to the Device Manager to see if the device is still listed. If it is, you can right-click on the device and uninstall it from there.

Which network type uses light pulses to transmit data?

Fiber optic networks transmit light pulses rather than electricity to communicate. Satellite networks use radio signals sent to and received from a satellite. Cable networks use a cable TV connection and electric signals to send data. Wireless networks use radio waves for sending network data within a local area network.

Which of the following Internet technologies provides the FASTEST speeds?

Fiber optic provides the greatest speed, as light is transmitted at the speed of light using lasers or LED light sources.

Which of the following uses persistent memory chips to store data?

Flash drives use persistent memory chips to store data.

You are helping a client connect their new Blu-ray player to their 4K projector. Which of the following cables would you MOST likely use?

HDMI is the most widely used connection for high-definition devices. Consumer-level devices such as Blu-ray players would most likely use an HDMI cable.

Match the storage device types on the left with the description and benefits on the right.

Hard disk drives (HDD) are thick magnetic disks made of aluminum platters. They use read/write heads to access data stored on the platters. They have up to several TB in storage capacity and their cost per MB is cheap. Solid state drive (SSD) is a flash device with storage capacity similar to a small hard drive. They are faster than other devices. They have no moving parts and last longer than other storage devices. Optical discs use lasers to read and write information that is stored in the form of pits in their reflective coating. They are ideal for storing and playing music and video. They are portable and cheap and have a long shelf life.

Match each item on the left to its appropriate category on the right.

Hardware refers to parts of the computer you can see and touch. Monitors, touchscreens, power cables, RAM, and video game controllers are all hardware. Software refers to computer programs and applications that run on hardware. Internet browsers, operating systems, and video games are all software.

You are troubleshooting a client's issue. Whenever she tries to double-click on a folder, the folder highlights but does not open. Your client gets frustrated because she has to keep clicking until the folder finally opens. Which of the following should you do to correct this issue?

If a folder is not opening when double-clicking, the user should go into the Mouse Properties window and select a slower setting.

You are troubleshooting a printer issue on a Windows 10 version 1703 system. Where would you go to view the printer's status page and configuration options?

In Windows 7 and 8 and versions of Windows 10 pre-1803, you can view a printer's status page and configuration options in the Devices and Printers applet in the Control Panel.

Which of the following fills in the microscopic gaps between the CPU and heat sink to increase the cooling effectiveness?

In between the heat sink and/or fan is a substance known as thermal paste. This allows for the efficient transfer of the heat from the CPU to the heat sink or fan. Thermal paste is effective because it fills in the microscopic gaps between the CPU and the heat sink that, if not filled, would reduce the heat sink's effectiveness.

Paul has been asked to install a new printer. The most important requirement is that the printer needs to be fast. Which of the following printer types is the fastest?

Laser printers are generally the fastest type of printer. Printing speed is especially noticeable for high-volume print jobs.

Which of the following is a type of peripheral input device that can be integrated into a laptop computer to provide digital camera functionality?

Mobile devices already include integrated cameras, so they are not commonly used with external digital cameras and webcams. For example, webcams are input devices that are most often installed in a laptop just above the screen.

Which of the following physical connections would you MOST likely use to connect a digital camera to a computer in order to transfer files?

Most digital cameras use a USB connection to transfer files to a computer.

Which of the following would MOST likely be used for contactless payment?

NFC (Near Field Communication) is a peer-to-peer version of RFID that's used to transfer data across a very small distance (typically about 2 inches). NFC is often used with smartphones for contactless payment, security ID badges, or in labels for inventory tracking.

Which of the following is a version of RFID that can work as both a tag and a reader?

NFC is a peer-to-peer version of RFID. This means it can be used as both a tag and a reader. NFC is commonly used for contactless payment, security ID tags, and more. NFC typically needs to be scanned at a distance of 2 inches or less.

Which of the following wireless communication technologies can be described as follows? Has a very limited transmission range, of less than two inches Used with credit cards and passports Slower than other wireless technologies Constantly emitting a signal

Near Field Communication, or NFC, uses the 13.56 MHz frequency and has a very short range. In order for devices to communicate, they have to be within two inches of each other. NFC chips are being used for such applications as passports and credit cards to contain all the information about the passport holder or the credit card account. NFC chips use encryption algorithms to secure the connection but are constantly emitting a signal and use a much slower transmission speed than other wireless technologies.

Which of the following wireless technologies requires a distance of approximately 4 cm (1.5 inches) in order to establish a communications link between devices?

Near Field Communications, or NFC, uses specially encoded tags that respond in a specific way when scanned by a radio frequency reader. NFC requires the devices to be approximately 4 cm or 1.5 inches from each other.

You have recently issued new mobile phones to the sales team in your company. Each phone has the ability to store and transmit encrypted information for such things as making payments at a checkout counter. Which of the following is the technology being used in these phones?

Near field communications (NFC) chips are a wireless mobile technology that can be embedded in credit cards and smartphones for transmitting financial information when making payments. For example, many point of sale devices can read information from NFC chips. NFC chips can also be used in passports to contain identity information.

Which of the following components is NOT required to create a network?

Networks are made of computer systems, network media, and network interfaces. Wireless adapters may be used in a network but are not necessary.

You are using your new scanner to scan a text document so you can edit it on the computer. Which type of software would you use to do this?

Optical Character Recognition (OCR) software is used to scan text documents and convert them into a document that can be edited on the computer.

Which of the following are optical storage devices? (Select three.)

Optical storage devices use lasers for both reading and writing information. The following are all optical storage devices: CD (Compact Disc) DVD (Digital Video Disc or Digital Versatile Disc) BD (Blu-ray Disc)

Which of the following is the term for a device (usually external to a computer) that is plugged into a computer's communication port or connected wirelessly?

Peripherals are hardware devices that are connected to a computer system to enhance its functionality.

Jeremy has just installed a printer in his home office and wants to allow others in the home to send print jobs to the printer through their devices. Which of the following should Jeremy use in his Windows 10 Settings application to enable this printing feature?

Printer Properties is a dialog available for each printer that includes a Share tab with options to set up a shared printer over a network.

One of the most important components of a computer is storage. All computers have ways to work with and store data. When a computer manipulates data, it places it in a short-term storage location. When a computer stores data, it is placed in a long-term storage location. What are the two terms we use for a short-term and long-term storage location? (Select two.)

RAM, or random access memory, is considered volatile memory. RAM is extremely important as it is where the central processing unit (CPU) stores the information it is currently working on. The CPU can store and retrieve data from RAM at high speeds. The only issue with RAM is when the power is removed from the computer, all data is lost, hence the term volatile memory. Non-volatile storage is a place to put data to keep it from being lost if power is removed from the computer. Devices that fall under this title are a computer's hard drive, CD-ROMs, ROM chips, and flash drives.

You are connecting your new 5.1 speaker set to your computer. The speaker set uses coaxial cables to plug into an S/PDIF jack. Which type of connection is MOST likely being used?

RCA connectors are used with coaxial cables to connect to an S/PDIF jack.

Which of the following is NOT a long-term storage device?

Random-Access Memory (RAM) holds data in short-term memory. Hard disks, compact discs, and flash storage are all long-term memory solutions.

A company executive has been experiencing slowness when her laptop boots. After performing some diagnostics and troubleshooting, you determine the hard drive has sufficient free space and it is rated as a 5400 RPM drive. You decide to defragment the hard drive. After the drive is defragmented, the laptop boot performance has not improved. Which of the following internal computing components would MOST LIKELY resolve the performance issue?

Replacing the hard drive with a Solid State Drive (SSD) will provide the greatest impact. Boot times have been reduced from several minutes to a matter of seconds by replacing a hard drive with an SSD.

Which type of RAM runs at the same clock speed as the CPU and data bus?

SDRAM stands for synchronous dynamic random access memory. Synchronous means in sync, which in this case means the RAM and CPU are synchronized together.

A healthcare organization provides mobile clinics throughout the world and needs to transfer patient statistical data to a central database via the Internet. Which network technology should they select to ensure network connectivity for any clinic located anywhere in the world, even remote areas?

Satellite capability is available even in areas that do not have a local network infrastructure. Satellite requires a local portable transmitter with an antenna directed skywards to a satellite. Satellite service providers offer nearly 100% global network coverage by maintaining a series of satellites circling the earth in geosynchronous orbit. Dial Up, ISDN, and cable modem, require a local network infrastructure provided by either the telephone company or cable television company.

You live in a rural area and don't have a nearby wired network to connect to. What could you use to connect to the Internet?

Satellite communication technology uses a satellite dish to send and receive signals to and from an orbiting satellite. Satellite Internet does not use telephone lines, cable systems, or other wired networks.

Which of the following is not an advantage of SSDs over HDDs?

Solid State Drives (SSDs) are generally more expensive than hard disk drives (HDDs). Some advantages of SSDs over HDDs include the following: They are faster They have no moving parts so they last longer They have lower power consumption They are less susceptible to physical damage (from dropping) and immune from magnetic fields They are smaller and lighter

Which of the following interfaces provides the best performance for an SSD?

Solid state drives can get the most performance from using the PCIe bus. The m.2 adapter allows a solid state drive to be plugged directly into the motherboard and use the PCIe bus.

Which of the following is responsible for verifying that all required components are operating properly before allowing the operating system to begin loading?

The Basic Input/Output System (BIOS) chip makes sure that all required components are plugged in and working properly on bootup. If so, it then tells the operating system to start loading.

Which of the following computer components is the MOST important part of any modern computer?

The CPU is the most important part of any modern computer system because it controls the other parts of the computer.

What can be done if a computer is relying too much on virtual memory supplied by the hard drive to temporarily store information needed by the CPU?

The CPU relies on RAM to store information it is currently working on. If a computer runs out of RAM space, the computer relies on virtual memory, which is located on the hard drive. The problem with this is accessing the hard disk is slower compared to RAM.

Which hardware component processes data?

The CPU, or Central Processing Unit, processes data.

What is the maximum supported transfer rate for the IEEE 1394b standard?

The IEEE 1394b, or Firewire 800, standard supports a maximum transfer rate of 800 Mbps.

Which of the following connectors are used to terminate a Cat 5e and Cat 6a network cable?

The RJ-45 connector is used to terminate copper network cabling.

Which of the following networking interfaces connects a computer to a wired local area network (LAN)?

The RJ-45 networking interface is common in today's networks and creates a wired connection between a computer and a network.

Which of the following video standards provided resolutions up to 1024x768, color depths up to 32 bits, and higher refresh rates when it was released?

The XGA standard provided resolutions up to 1024x768, color depths up to 32-bits, and higher refresh rates when it was released. Most modern display systems use a variation of the XGA standard today.

What is the bus between the RAM and CPU called?

The bus that connects the CPU and RAM is known as the front-side bus (FSB). The faster the speed of the FSB, the faster the CPU can receive data to process.

Which motherboard component provides functions that might otherwise require an expansion card?

The chipset provides functions such as graphics, audio, network, and more. If the chipset does not provide a certain function, an expansion card will need to be used.

Which of the following stores data using microscopic light and dark spots?

The computer uses a laser to read the microscopic light and dark spots on CDs, which are then digitized into 1s and 0s.

Which kind of connector is pictured here?

The connector pictured is a male USB A connector.

Which of the following chips is responsible for processing audio input from a microphone and converting it into data?

The digital signal processor (DSP) chip is responsible for converting data and outputting it into a signal for the speakers. It converts audio input from a microphone into data the computer can read.

You are trying to connect a new USB device to your computer. You install the driver and then connect the device to an open USB port. The device does not work. Which of the following troubleshooting steps is the BEST to try first?

The first thing to check is whether the USB device is plugged in properly. If that doesn't correct the problem, you might try a different USB cable before doing more extensive troubleshooting. You should only replace the device or install a new USB controller card after verifying where the problem lies. For example, if you try the device on another computer and it still doesn't work, you might assume that the device is defective. If the device works on a different computer, then the USB ports on the first computer might be defective.

You have just connected a new USB device to your Windows system. You used the installation disc that came with the device to install the drivers needed to support the device. After the installation, the system frequently crashes when you try to access the new device. Which of the following steps would MOST likely resolve this issue?

The first thing to try would be to download and install the latest driver for the device from the manufacturer's website.

You have two different keyboard layouts configured on your Windows 10 computer. Which of the following keyboard shortcuts allows you to easily switch between them?

The keyboard shortcut Start + Spacebar allows you to easily switch between multiple keyboard layouts.

Which type of storage media is susceptible to data loss due to excessive jostling or movement?

The most common type of long-term storage is the hard disk drive (HDD). Hard disks use thick, magnetic disks encased in a protective housing to store data. Because a hard disk drive is usually installed inside of a computer, it can be difficult to move one between systems. If you need a portable hard disk, use an external hard disk drive that uses a USB or FireWire connection to the computer. Hard disks can store a large amount of data, but because they rely on moving parts, they are prone to failure if they are shaken or jostled too much.

Rico, a technician, works for a manufacturer that has been experiencing power outages at one of their warehouses. The warehouse has a number of IP-based security cameras. After the last power outage, the cameras are all powered on but are not accessible from the security office. Which of the following is MOST likely the cause?

The most likely cause is that the wireless router has not reconnected to the network. Either more time or manual intervention may be required to resolve the issue.

You are attempting to install a 64-bit version of a program but keep getting an error message that the software is not compatible with your computer. Which of the following is the MOST likely reason for this?

The most likely reason why a 64-bit program would not be compatible is that the computer is a 32-bit system. A 32-bit system is unable to run 64-bit software, while a 64-bit system is able to run 32-bit software.

You are upgrading your computer system by adding more RAM. You purchase two 4GB sticks of RAM and install them on your computer. After booting up the system, you find that only 4GB is recognized. Which of the following is the MOST likely reason for this?

The most likely reason why the computer is only recognizing 4GB of RAM is that the computer is a 32-bit system. 32-bit systems only recognize up to 4GB of RAM and no more.

Which of the following BEST describes a motherboard?

The motherboard is a printed circuit board that contains sockets and slots for upgradeable components.

Carrol purchased a new printer and attached it to her workstation with a USB cable. The printer is powered on, but the computer does not recognize the printer. Which of the following should Carrol do next to be able to send print jobs to the printer?

The next step would be to install the latest printer driver, which will allow the printer to be recognized by the operating system.

You are connecting an external monitor to an Apple Macbook. Which of the following connectors would you MOST likely use?

Thunderbolt connectors were developed by Intel and are used primarily with Apple workstations and laptops to connect external displays.

Which of the following colored jacks on an audio card would you use to connect a 5.1 speaker set?

To connect a 5.1 speaker set, you would use the lime, black, and orange jacks. Lime - Audio out for the main stereo speakers Light blue - Audio in jack used for tape decks, CD players, tuners, etc. Pink - Audio in jack used for microphones Black - Audio out jack used for rear stereo speakers Orange - Audio out jack used for center channel and subwoofer Silver - Audio out jack used for side-channel speakers on a 7.1 speaker configuration Brown - Audio out jack used for a special panning right-to-left speaker

Which of the following is an input device?

Touchscreens are devices that receive input from the user.

Which USB mode supports up to 5 Gbps?

USB 3.0 introduced SuperSpeed mode, which supports speeds of up to 5 Gbps.

Which of the following is an advantage of DisplayPort 1.4 over HDMI 2.0?

While HDMI supports a maximum bandwidth of 18 Gbps, DisplayPort 1.4 has a maximum bandwidth of 32.4 Gbps, which supports a much greater resolution.

For many years, computers placed data on hard drives magnetically using platters coated with an iron oxide. Modern computers are now using the more modern solid-state drives, which are faster and less prone to mechanical failures. Which component is used inside a solid-state drive to store data?

You can store information at higher speeds with flash memory (like RAM does), but information is not lost if the power is removed. It is considered non-volatile memory.


Related study sets

OTA 1001, 6. cardiovascular, B. combining forms and abbreviations practice exercises

View Set

Ch. 13 Community Food Supply and Health

View Set

Funds Quiz 4 (29, 33, 34, 36, 37)

View Set

Module 7-12 Iggy/ATI/SS Practice Questions

View Set

Spanish with Paul: mini course - 2

View Set

Chapter 9- Tools for Healthy Eating

View Set