BAO6 Power Tools (Intro to Robotics)
Which wheel type should be used with an ANGLE GRINDER when removing surface rust on a large work piece?
Crimped wire cup
On a jigsaw, the guide wheel.....
supports the blade under horizontal force
in a vertical bandsaw, which description is proper for a stand
supports the body of the tool
In a vertical bandsaw, which description is proper for a table
supports the work piece
On a drill press, a table
supports the work piece
Which rotary tool mandrel should be used for polishing disks
threaded
In a vertical bandsaw, which description is proper for a drive pulley?
transfers power from the motor blades to the wheels
What is the first task that must be performed when changing the spindle speed on a drill press
unplug the machine
Choose the proper sander for light detail sanding
vibratory
Which of the following acts as a backstop on a bench grinder
work piece rest
Which of the following features is NOT available on a consumer grade jigsaw
36 amp motor
What is the smallest blade that can fit in a 7-1/4" circular saw?
7-1/4"
A buffing wheel is a bench grinder disk used for....
Burnishing
A cut-off disk is used on an angle grinder disk for which task?
Segment heavy pipe
A GRINDING WHEEL is used on an angle grinder disk for which task?
Sharpen tools
Which of the following is NOT a feature of a standard table saw?
Speed Control
Which of the following is NOT a factor when choosing a bandsaw blade
angle of cut
Choose the proper sander for leveling hard surfaces
belt sander
Which of the following hand-held sanders types is most aggressive
belt sander
Which of the following is NOT part of the shoe on a circular saw?
blade lock
The collet and collet nut on a rotary tool perform the same task as a _____ on a power drill or drill press
chuck
What part of a power drill protects the motor from excessive torque
clutch
on a drill press, a depth stop
controls the distance the bit can travel
on a jigsaw the trigger
controls the power output of the motor
On a drill press, a feed control
controls the rate of vertical movement of the bit
a cut-off blade is used on an angle grinder disk for which task
create a channel in concrete
On a drill press, a belt
determines spindle speed
On a table saw, a miter gauge
determines the horizontal angle of a cut
In what order should the following steps be performed when changing a table saw blade
disconnect the saw form the power sources, remove the throat plate, raise the arbor, remove the old blade
to drill into a work piece, the directional switch must be in what position?
far left
Sandpaper grit rating of 220 is used for
finish surface preparation
A flex wheel is used on an angle grinder disk for which task
grind inside a contour
What protects the operator from cutting the edge of a jigsaw blade
guard
in a vertical bandsaw, which description is proper for a blade guide
guides the exposed blade
Sandpaper grit rating of 36 is used for
heavy material removal
On a table saw, an arbor
holds and rotates the blade
On a circular saw, the angle lock ________
holds the blade at a specified angle
On a circular saw, the blade lock
immobilizes the spindle
Guards and shields on a bench grinder do NOT protect the user from which of the following
kickback
The blade of a reciprocating saw is NOT designed to effectively perform which of the following applications
kickback
On a circular saw, the shoe.....
maintains the depth of the cut
On a jigsaw, the shoe plate
maintains the tool body's distance form the work piece
Which type of material should never be cut with a reciprocating saw set on orbital action
metal
Sandpaper grit rating of 120 is used for
moderate smoothing
On a jigsaw, orbital mode...
moves the blade forward on an upstroke
Choose the proper sander for smoothing shallow imperfections
orbital sander
Sandpaper grit rating of 1000 is used for
polishing
On a reciprocating saw, the trigger lock
prevents accidental startup
On a circular saw, the blade housing
protects the user from the blade
On a table saw, a table insert
provides access to the blade
On a table saw, an elevation wheel
raises and lowers the blade
Which of the following sequences of tasks is in the order they should be performed before cutting with and angle grinder
remove spindle nut, adjusts blade guard, install cut off wheel, plug in tool
A knotted wire wheel is a bench grinder disk used for
removing excess solder
The speed control switch on a dual speed drill limits the _____ of the bit
rotational speed
On a RECIPROCATING SAW, the clamp assembly lock
secures the blade
In what order should the steps be when cutting a work piece with a horizontal bandsaw?
set blade speed, clamp work piece, switch power on, set feed rate
On a reciprocating saw, the variable speed control
sets the maximum SPM
A crimped wire wheel is a BENCH GRINDER DISK used for
shaping soft plastics
an ABRASIVE GRINDING wheel is a BENCH GRINDER DISK used for
sharpening tools