Chapter 5
A collision fragment, also known as a *RUNT* frame, is a frame of fewer than 64 bytes in length.
Fill in the blank.
ARP *spoofing* is a technique that is used to send fake ARP messages to other hosts in the LAN. The aim is to associate IP addresses to the wrong MAC addresses.
Fill in the blank.
On a Cisco switch, *port-based* memory buffering is used to buffer frames in queues linked to specific incoming and outgoing ports.
Fill in the blank.
Host A sends out a broadcast of FF:FF:FF:FF:FF:FF. Every other host connected to the switch receives the broadcast and host D responds with its MAC address.*
Refer to the exhibit. A switch with a default configuration connects four hosts. The ARP table for host A is shown. What happens when host A wants to send an IP packet to host D?
only hosts B, C, and router R1*
Refer to the exhibit. The switches are in their default configuration. Host A needs to communicate with host D, but host A does not have the MAC address for its default gateway. Which network hosts will receive the ARP request sent by host A?
PC2 will send an ARP reply with its MAC address.*
Refer to the exhibit. PC1 issues an ARP request because it needs to send a packet to PC2. In this scenario, what will happen next?
The switch will forward the frame to all ports except port 4.*
Refer to the exhibit. The exhibit shows a small switched network and the contents of the MAC address table of the switch. PC1 has sent a frame addressed to PC3. What will the switch do with the frame?
Layer 3 address to a Layer 2 address*
The ARP table in a switch maps which two types of address together?
true*
True or False? When a device is sending data to another device on a remote network, the Ethernet frame is sent to the MAC address of the default gateway.
the source Layer 2 address of incoming frames*
What addressing information is recorded by a switch to build its MAC address table?
64 bytes* 1518 bytes*
What are the two sizes (minimum and maximum) of an Ethernet frame? (Choose two.)
On large networks with low bandwidth, multiple ARP broadcasts could cause data communication delays. * Network attackers could manipulate MAC address and IP address mappings in ARP messages with the intent of intercepting network traffic.*
What are two potential network problems that can result from ARP operation? (Choose two.)
The frame is dropped.*
What happens to runt frames received by a Cisco Ethernet switch?
Frames are buffered in queues linked to specific ports.*
What is a characteristic of port-based memory buffering?
a feature that detects Ethernet cable type*
What is auto-MDIX?
to associate IP addresses to the wrong MAC address*
What is the aim of an ARP spoofing attack?
64 bytes*
What is the minimum Ethernet frame size that will not be discarded by the receiver as a runt frame?
It defines the most common LAN type in the world.*
What statement describes Ethernet?
They must be globally unique.*
What statement describes a characteristic of MAC addresses?
FFFF.FFFF.FFFF*
Which destination address is used in an ARP request frame?
They are received and processed by every device on the local network.*
Which statement describes the treatment of ARP requests on the local link?
The first three bytes are used by the vendor assigned OUI.*
Which statement is true about MAC addresses?
store-and-forward*
Which switching method uses the CRC value in a frame?
Logical link control is implemented in software.* The data link layer uses LLC to communicate with the upper layers of the protocol suite.*
Which two statements describe features or functions of the logical link control sublayer in Ethernet standards? (Choose two.)
